Automatically Run Macro On Cell Changing
Jan 24, 2008I am writing/creating macros and I want to create one that will automatically run when a cell value is changed to a certain entry.
View 2 RepliesI am writing/creating macros and I want to create one that will automatically run when a cell value is changed to a certain entry.
View 2 RepliesIn my sheet called summary I have the names of the rest of the tabs in the book in cells B5 to B34. We want to be able to change the names of the tabs by changing their respective cell on the summary tab. So “sheet1” corresponds to B5, “sheet2” to B6, “sheet3” to B7, etc.. So if I change the name in B5 to say “APPLE” I want the tab for sheet1 to change to APPLE. When I change B10 from “sheet6” to “Lemon” I want sheet6 to be titled “Lemon”.
View 5 Replies View RelatedPrivate Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.AutoFilterMode = False
Range("d6:g6"). AutoFilter
Range("d6:g6").AutoFilter Field:=2, Criteria1:=Range("e1"), Operator:=xlAnd, _
Criteria2:=Range("e2")
I've attached the file also.
What i intend to do is that : (1) if i enter a value in E3, the filter should only apply using E3 value (currently its applying E3 value but if E4 is kept blank, it takes that as = " " ) . Unfortunately, i need to have the and condition, so i have to find a way in spite of this condition. Any way out ??
(2) If i enter values in A) E3 & F3 B) E3, F3, G3...then it ahould make multiple filtering possible. But when i try to apply such a condition, the same problem as in point (1) occurs, it takes the and empty criteria range as = " "
I want to create a macro or formula for changing the colour of the cell after half an hour of inputting.
View 3 Replies View RelatedI did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
Is there a way to change the value of cell A1, for example, from one value to another, hit the enter key, and activate a macro this way.
A couple of qualifications:
- the value in cell A1 will never be the same (that is it could be -23.43 or .12)
- I can not simply tie the macro to the "enter" key as there will be numerous cells (A1, B3, C90 and so on) in the same sheet that I will need to do this with, each tied to a different macro.
I would like to write a macro that performs the following function:
I have a value in cell A1
In cell A2, I have the formula "=A1"
I want to make it so that cell A2 can never be directly changed; the only way to change the value in A2 is by changing A1. A2 should always equal A1.
I want a message box to pop up and alert the user whenever they attempt to modify A2, instructing them that if they wish to change A2, they have to change A1.
I had written this macro, and it kinda does the trick:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("a2") Range("a1") Then
MsgBox "text goes here"
Range("a2").Value = Range("a1")
End If
End Sub
When I attempt to change cell A2, I get the MsgBox popup and it works how I want it to. However, when I alter cell A1, I get the same popup before cell A2 updates (to be precise, the popup occurs after I click another cell). I would like this to be immediate and without a MsgBox.
Made a macro to Copy a value and paste is as "Special" for Value only.
The problem is it won't function correctly Unless I force a switch to the sheet where the calculations are. (Which I want to avoid)
The current code is:
In the following sheet I'm tracking daily numbers against a monthly total. In the cell E4 for example I have a minimum per day number needed which is based on the monthly goal divided by the number of days availble to work. What I would like to be able to do is have the number auto-adjust if a letter (i.e. V=Vacation, S=Sick, etc...) is used in place of a number on any given day.
I have been using the following to change the year in the Header
Code:
Sub Change_Format()
' Ctrl-y will change the year per individual sheet
ActiveSheet.PageSetup.RightHeader = Format(Now(), "YYYY")
End Sub
Is there a way to have this done automatically? There are absout 6 sheets in the workbook that have the year in the header and right now the code is in Module 3 and I have to press ctrl+y for every sheet.
How do I stop my sum formula from adding to it's range every time I type a number in? I have 12 columns of numbers by date and 4 quarter columns at the end totaling each of the 4 quarters. If I start typing directly across, the 1st quarter sum formula updates to include every number in the first 12 columns. The other quarter column sum totals stay the same.
View 7 Replies View RelatedI have 2 Excel Files. In the main file I have a macro that copy/pastes data from the secondary file. The secondary file is a daily file that gets its file name changed every day (eg. 14OCT09.xls).
The last piece of the Macro goes back to the secondary file and ends with:
Windows("14OCT09.xls").activate
Range ("A1").Select
Now tomorrow, I have to manually edit the Macro and change the code to 15OCT09.xls before I run the Macro. Is there a way to automatically change this date without having to manually edit it on a daily basis?
I have an excel sheet which is protected (mainly so that the users will not change any formulas) the excel sheet is basically a list
Just to put you in the picture
Column B Is PO Number
Column C Is Remarks
Column D Date
Column E Description
Column F Supplier
Column G Amount
I would like that when Column C changes to "OK Checked" column B C D E F G are protected and locked. But obviously for that particular row.
For example the input of Cell C15 changes to "OK Checked" then B15, C15,E15,F15,G15.
the macro must NOT be fixed to a particular row (in this case 15)
I have a workbook, with 2 sheets. first page has graphs, second has data. in my charts I refer to a named range on the second one as follows: Data!Named_Range, where "Data" is the name of the second sheet. However when i save this, it changes the range of the chart to: '101044.xlsm'!Named_Range, where 101044 is the name of the workbook. This is a problem for me as this workbook will often be loaded into a document handling system where the file will change name, throwing out all sorts of errors because the chart path is invalid, and i have to change the range of all the charts manually. why does it have to use the file name when reffering inside the same workbook? and how do i force this to not change?
View 5 Replies View RelatedI'm designing a spreadsheet currently. I want to input a number into cell A1 - for example 13. Now the number 13 has a percentage value of 67.3%. When I enter the value into A1 I want excel to automatically fill cell A5 with the percentage value of 67.3%.
I need to have the numbers from 1-20 all with varying percentage values.
1 = 100%
2 = 97.8%
3 = 94.3% etc..
So essentially I would like to enter 13 into cell A1 and for cell A5 to automatically fill in the value of 67.3%, if I was to change the value in A1 to 10 it would also automatically change the percentage from 67.3% to 74.7%..
When a change is made in cell L11, cell N11 should be locked automatically for typing. This is true for the cells between L11:L25, and cells N11:N25.
I have been trying to come up with a code that will:
1 - start my macro when f.ex. L11 is > 0
2 - lock N11 when L11 is filled out
3 - unlock N11 when the input in L11 is deleted
This is my attempt so far to put together a code:
[Code] .....
I'm using Excel 2010.
I m trying to get around here within the company I work for.
I'm interested to know how to set a specific range value e.g. "5 to 10" once a value is between those 2 numbers, and then if the value in the next row below is 34.12 it will be "30 to 35".
Here's an example code I constructed, but the darn thing just keeps on running
In my program I have data coming from an outside workbook. The amount of data coming into my program changes (Additional Rows) could be more or less. What I want is for the macro to recogize the change in data size and copy the new amount automatically. ie Change copy range. I would post the program but it is proprietary.
View 8 Replies View RelatedVBA code that would update a chart automatically as you change the inputs which are located in cells in excel. The inputs are located in cells B5:B9 and i want a code so that as you change these numbers the chart would automatically update.
View 1 Replies View RelatedI have worksheets named 1 to 100. In a different worksheet "Summary" I have a summary of data of those worksheets. I want to change the worksheet number automatically in a row by dragging.
For example, in worksheet "Summary" ....
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
I want to be able to run a macro automatically everytime I change a cell. For example, I have cell K1 and K2 that contain a date and a sales rep name. I want the macro to run automatically everytime I change either of these two cells. Is there any way to do this?
I want to make a spreadsheet with bets of mine and my friends (picture). How to make cells D4, D5, etc., change to Win or Loss depending on the result?
Attached Image : Bets.jpg
As I copy and past my lookup formula down the page it is changing the lookup range which I think is what is giving me so many #N/A results. My first Formula is
=IFERROR(VLOOKUP(A2,Coors2!A2:D3765,3,FALSE),IFERROR(VLOOKUP(A2,'AB2'!A2:C13944,3,FALSE),(VLOOKUP(A2 ,'WM2'!A2:C4843,3,FALSE))))
Then for instance at line 59 the formula is
=IFERROR(VLOOKUP(A59,Coors2!A59:D3822,3,FALSE),IFERROR(VLOOKUP(A59,'AB2'!A59:C14001,3,FALSE),(VLOOKU P(A59,'WM2'!A59:C4900,3,FALSE))))
I have figure A1 column which total amount accounting at cells A31. I need figure 360 as a benchmark calculation perfectly been done. In this calculation 360 well off inside cells A18 although actual number is 363. If we use Conditional Formatting when had enough total in cells the achieve 360, cells colour will be transformed to red. What formula which need I used to change no matter cells on A1 to A30 if sufficient study 360 automatically cells changing colour to red
View 5 Replies View RelatedI have a worksheet with data in columns F,G,H and I. There is a total in column J. (=SUM(F1:I1)
I've written some code that allows a user to insert additional columns. However, I'm finding it difficult to find a way of changing the calculation in the total column automatically when a new column is inserted.
How can I make a macro to automatically insert the information in a new cell (COMP OFFICE). See attached. I want create a macro that cell COMP CODE 1JFQ, 3NM, 1145, 1C1 automatically put "AFP 3" in cell COMP OFFICE, etc. See attached.
There are hundreds of different codes in cell COMP CODE that we are pulling from our main office and internally we have to create COMP OFFICE cell to group them for our own purposes. It take a lot of time for us to manually tag the codes to COMP OFFICE cell
Is it possible to jump from one cell to another once a certain number of lines/characters has been reached to continue entering information uninterrupted with a macro?
Example: Cell A37 holds 10 lines with 78 character spaces on each line. Anymore than that is hidden. I would like to jump to cell A61 automatically when A37 reaches that limit to continue entering information without having to stop and click on A61. Is this possible?
I have a list (formatted as a table) on one sheet that I want users to be able to change. On another sheet there is a table that needs to have every item from the list in the first column. So far I have achieved this by using "=Table2[[#This Row],[Crop List]]" in every cell of the column where I want the list copied. ("Table2" is the list, "Crop List" is the header on the list.) This basically works, but it has some drawbacks:
1) When I try to sort the table, the items referencing the list are stuck in their original positions and no longer match the other columns.
2) I have to have a large number of cells displaying "#VALUE!" at the bottom of my table because they refer to empty cells in the list which might later be filled.
In case my explanation wasn't clear, I've attached a copy of the workbook. Everything I'm talking about is on the first two sheets, "Lists" and "Pricing."
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View Related