I have a worksheet called "Roster" with a list of names from D7:D17 each person on the list has a separate sheet that is called by their name. the sheets are not linked up. the names were just manually typed into the list and into each sheet name.
If any name is changed on the list on "Roster!D7:D17" i would like the sheet that has that name to change as well.
This is the code that i was sent, but i do not know enough about VBA code to understand exactly what is happening, thus i cannot diagnose the problem. I placed the following code into the page "Roster" (by right-clicking and then pasting the code) then i closed, but nothing happens. I can mess with the code and get an error message. but that is about it. error messages usually say something about the debugger, or runtime error or something.
there is the
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
OldVal(0) = OldVal(1)
OldVal(1) = Target(1).Value
End Sub
One of the things it does throughout the course of the run is unprotect the worksheet, do what it needs to and then reprotects the sheet (using a password). On the second run, the sheet protection input box is shown and I am required to input the password before the code will execute.
The code that I have written uses an Add-in that pulls data from a database. As part of that retrieval, the other add-in protects the sheet without a password. Would that be causing my error?
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
If no program (code) is running and Calculation is turned to ON, what expression could be placed into a cell that will change on its own that could necessarily and periodically trigger a change event subroutine. How can I trigger a change event when nothing is changing?
I have a situation where my code simply stops running so i need a change event to assess whether code is running (or not) and to issue a warning to the programmer that the code is, in fact, stalled. The change event subroutine has not only a warning system but a "timetorun" feature that will come back and warn again until the programmer can address the issue.
Unfortunately, I have to deal with this issue in a check and balance fashion because my many attempts to seek solutions to a stalled program (root cause) have failed.
I have a workbook, that when opened the first time needs to prompt the user to save it. I got that working with no issues by using
Private Sub Workbook_Open() SaveOnOpen End Sub
where SaveOnOpen is a procedure in another module. What I would like to do now is re-assign the Workbook_Open sub to be set to null, so that it doesn't run any more. Is it possible to somehow assign Workbook_Open to call a null procedure, as opposed to setting up an onTime call to delete the code itself?
I have a macro which makes an renames a new sheet for me using a button, how can I copy macros currently found in only one sheet to this new sheet? Mainly used in formating and formula display.
I wonder how to capture de event when one choose to delete a sheet. Similar to vbyes or vbno?? Now it inmediatley goes to my sheet_deactivate_event, but then I don't know if it is beiing deleted? I mean capture if you do righclick sheettab
I have been working on a workbook that uses as a source information on Sheet 1.
Sheet 1
Each item reports a number of different details from column A to column BY.
Each row is for a different item.
25 rows of information.
Sheet 2
This is my master formula sheet, the one I've been using to create the page that reports and formulates information on a single item. The source for this sheet is taken from the cells in Sheet1!Row2.
Now that I have the sheet pretty much finished, I want to paste the same report on each succeeding page for a total of 25 sheets. I can copy Sheet2 and paste into each successive sheet, but then I need to change every single formula so that where it said AT2 it changes to AT3, where it was H2, H3, etc., from A to BY.
Problem: Can I use something that will automatically take the information for succeeding sheets and take as its source the succeeding row from the source page?
I don't know that I'm describing that sufficiently, so:
Sheet 3 would take as its source Sheet1, row 3. Sheet 4 would take as its source Sheet1, row 4. Sheet 5 would take as its source Sheet1, row 5. Sheet 6 would take as its source Sheet1, row 6.
Etc., etc.
In the past I used the find/replace function, but this sheet seems way too complicated for that. As an example, one cell alone on my master sheet is
so I would need to change S2 to S3 everywhere it appears, but there are probably more than a hundred places on the sheet that I'd have to manually change 2s to 3s, etc., for 25 sheets, which is why I'm wondering if there isn't a better way than going cell by cell, sheet by sheet.
I have a Combo Box on a Work Sheet that the user selects a subject from. When the Combo Box content changes I need it to run a macro. Ive tried putting this in the WorkSheet file for the sheet
I'm making a macro to show or hide rows depending on whether or not a checkbox is checked. I'm using Wingdings font checkboxes, not actual form controls. The question: My macro can't find the last row of the used range on the sheet. This is in the sheet's code, set to fire when the selection changes.
Normally the line in blue works just fine, but it's not working here. In the attached workbook, the macro thinks the last used row is row 19, when it's actually row 21. What's going on?
why this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then With Range("B1:F5") Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value End With End If End Sub
I have many worksheets in a workbook that need to be saved if a user changesanything on them. These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) Dim sht As Object For Each sht In ThisWorkbook.Sheets If LCase(Right(ws.Name, 2)) = "sd" Then MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
I have the following code what it does, is when a user changes a cell it copies the row to another sheet along with the userstatus. Problem is if the user pastes more than one column of data into the sheet it copies the row more than once depending on the amount of columns the user pasted . I only want to copy the row once.
Private Sub Worksheet_Change(ByVal Target As Range) Dim SelRng As Range If Not Intersect(Target, Range("A3:K30")) Is Nothing Then Set SelRng = Target Application. ScreenUpdating = False For Each cell In SelRng Range(Range("A" & (cell.Row)), Cells(cell.Row, Columns.Count).End(xlToLeft).Offset(0, -5)).Copy Sheets("Tracking").Select ActiveSheet.Cells(Rows.Count, 31).End(xlUp).Offset(1, -13).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ActiveCell.Offset(0, 13).Value = ActiveWorkbook.UserStatus Sheets("Engine 1").Select Next cell Application.CutCopyMode = False Application.ScreenUpdating = True End If End Sub
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value If UserInput > 1 Then NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2) Application.EnableEvents = False Target = NewInput Application.EnableEvents = True End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
I have found that this only works on the sheet being viewed, how can I make it work on a different sheet than the one that I am on?
Option Explicit Private Sub Worksheet_Calculate() If Range("C1").Value = "5" Then ActiveSheet.Shapes("rectangle 1").Visible = True Else ActiveSheet.Shapes("rectangle 1").Visible = False End If End Sub Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I need a before save event macro in excel that will check if sheet1 cell ref A25 = zero. If it isnt zero I want a msgbox to say "Does Not Equal Zero" to pop up, if it is zero then I do not want a msgbox displayed. In both instances I still want the file to be saved.
I have a situation where I have a macro that sorts on sheet1. I would like it to run when a cell changes on sheet2 in E9:N21. Since the cells on sheet1 are linked to data on sheet2, I cannot trigger the macro from sheet1 due to the cells being formulas instead of values.
Here is what I have tried and it is not working. I must be doing something wrong with the syntax.
Private Sub Worksheet_Change(ByVal Target As Range) If Intersect(Target, Range(Sheets("Games")("E9:N21"))) Is Nothing Then Exit Sub Else ActiveWindow.SmallScroll Down:=33 Rows("6:55").Select Range("A55").Activate Selection.Sort Key1:=Range("A55"), Order1:=xlDescending, Header:=xlGuess _ , OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal Range("A3").Select End If End Sub
The macro below works great as a conditional format routine on the Input sheet of the workbook, however I would like it to run on the Data sheet as well, but with a different range (E3:CE117). Can this be done?
Private Sub Worksheet_Calculate() Dim dcell As Range Dim icolour As Integer For Each dcell In Range("c15:g27") Select Case dcell.Value Case "GA" icolor = 43 Case "GAC" icolor = 4 Case "LA" icolor = 45.....................
i currently have a workbbok that i have a very simple worksheet event macro that will filter a seperate sheets contents to the corresponding entry number. is there any way to make a dynamic event macro that will filter my second sheet depending on what cell is selceted on the first.
for example record 1 on sheet 1. if cell L1 is selected it will filter sheet 2 to to record 1, record 2 on sheet 1, if cell L2 is selected it will filter sheet 2 record 2 and so on. this list of records will continue to grow and i cant think of any way other than what i currently have, which is to make each filter macro for every cell.
is ther a better way example of CODE HERE
VB: Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) If Target.Address = "$L$5" Then Call Filter1
I need my macro to run when the spreadsheet is Saved. Is that process written in the macro code or is there an existing event control in Excel to accomplish this? Running Excel 2007. I tried searching the forum & found one post that ran the macro on open, but couldn't set that up to work on save.
with an event macro. Basically I have a workbook with 11 worksheets and have created a macro that increases the value of cell J3 by 1 in Sheet1. However at present it only works from Sheet5, but I now need it to run from Sheet6 and Sheet11 as well and not from any other worksheets. The code I have is as follows
Private Sub Workbook_BeforePrint(Cancel As Boolean) If ActiveSheet.CodeName = "Sheet5" Then With Sheet1 .Range("J3").Value = .Range("J3").Value + 1 End With End If End Sub
how to make a code so that it captures the event of pressing any key of the keyboard and triggers a macro.
I tried using OnKey method but the problem with this is I am getting stick to any particular button whichever i specify in the onkey method wheareas I want to keep it general for any button in the keyboard.
Also if anyone can suggest how can I use OnKey method to use the "S" key to launch a macro.
I have a workbook with multiple sheets. Each sheet has a title (just words in a cell). Is there VBA formula that will have the sheet take the name of the title and also chnage when the title name changes?
I'm using a macro that picks up on changes in a active cell.. This is the code
HTML Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Application.Intersect(Target, Range("A:A")) Is Nothing Then If Target.Value <> "" Then
ThisWorkbook.Sheets("Log").Cells(Target.Row, 2).Formula = "=Today()" End If End If End Sub
There's a problem with this code, when select from a range and hit delete, i get a error mismatch. I want to have the macro ignore when i select active cell range of greater then 1.
