Changing Page Orientation For Different Pages?
Jan 28, 2014
I've created a workbook with several pages, on all of the first pages they are set up in Landscape view since it contains several columbs of accounting amounts. Below each (page 2) I would like to create a receipt template that I can use the sum formulas and text formulas which is no problem. However, when I print the selected page 2 of 2 to get the invoice, it also comes out in landscape set up. Can I have one page (ie: rows 1-44) in landscape and then page two (rows 45-83) in portrait.
View 2 Replies
ADVERTISEMENT
Jun 17, 2007
I have a normal line graph I would like to see plotted vertically rather than the normal horizontal layout. In other words, points/lines would appear around a vertical axis and go from side to side. The normal graph would look as if it was tipped on its left side.
View 9 Replies
View Related
Feb 3, 2010
I have a list that I need to print. It is only 2 columns, but 12 pages long. I would like to print 4 or 6 pages, side by side on the same sheet. I tried changing the print setting to 4 pages per page. But, when I looked at the print preview, it showed only 1 page per page.
View 11 Replies
View Related
Jan 25, 2013
I have data range which have three sections identical in shape and size.
How should i set the page setup so that each section print on a separate page.
View 1 Replies
View Related
Apr 18, 2006
I have a file that's about 50 000 rows long, and 4 collumns wide. And this whould work just fine, but I would not like to print a little over 700 pages... So now I've tried to change the sheet so that I could get 9 collumns on every page (insted of 4). So that I could get two of the old pages on one page (with one empty row between them... It's hard to explain but here is a little ASCII pic that might give you a hint.
OLD (about 700 pages):
| | | |
| | | |
| | | |
| | | |
NEW(about 350 pages):
| | | |-| | | |
| | | |-| | | |
| | | |-| | | |
| | | |-| | | |
(Both "pictures" are just one page)
(the "-" are the empty row)
I can not take the second half of the rows and paste them beside the first half of the rows...
View 9 Replies
View Related
Sep 17, 2013
Is there anyway I can make excel scale a set amount of information between page breaks fit 1 page wide 1 page tall? using a macro.
FT000010
SPAX SCREWS 1000pc TRADE PACK
Llandeilo
4
0
[Code]....
I essentially have this data repeated multiple times depending on how many products I am looking at, I would like this repeated 3 times per page, which is where the page breaks are currently being placed. When i tried to set Width 1 page the automatic page breaks would only allow two of these per page at 100% scaling.
View 1 Replies
View Related
Jan 30, 2008
I have a sheet with a few hundred rows of data which I filter out by using a very simple autofilter. I have set page breaks throughout the whole sheet on certain rows I need to start on a new page. If the auto filter filters out any of these rows when it prints it prints a blank page where that row would have been before it was hidden by the autofilter.
For example the whole list is say 5 pages (set with page breaks) I apply an auto filter that now reduces it down to 2 pages say the 1st and last page of the original list. If I page break preview it, it shows me that it will be 2 pages but when i print preview/print the sheet it prints the 1st page then 3 blank pages then page 5 even know that the page break preview only shows and numbers 2 pages. Because the original page breaks are still there just are hidden by the autofilter so it adds them in as blank pages
View 4 Replies
View Related
Jan 15, 2014
Why when I drag the dotted blue page break line does it sometimes break the entire doc into one page per cell ?
The doc is not wide. When I first load I can drag the break line successfully. Then I print preview... select print on both sides... boom.. goes from 4 pages to 14. Then I go back to page break view... drag the line... boom... Hundreds of pages. Even if I revert back to printing on one side it still is messed up.
How do I make this stop?? What am I doing wrong?? Office 2010
View 1 Replies
View Related
Nov 12, 2012
I have a single page spreadsheet. I want to print multiple copies and have a unique invoice number on each page printed in cell O1. I don't want to just send it to the printer as individual print jobs. I would like to send it to print as a pdf in a single 100 page document or if not a pdf then just as a multiple page document.
For example first print run would start at number 1001 and last numbered page is 1101.
View 6 Replies
View Related
Jan 15, 2009
I have a workbook that is not showing everything that I would like it to on one page (but I know that all the information would fit onto one page (width) but I cannot seem to be able to change the page break. I tried following the directions in the "excel help" but just can't seem to get it to work. I have attached a sample workbook so that you can see what I mean.
View 2 Replies
View Related
Jul 22, 2006
can anyone show me the way to run a macro when visual basic editor opens
View 5 Replies
View Related
Nov 12, 2008
I have a selected area which I print as labels.
I want to have a number on this label preferably counting back from the quantity of print.
So if I select 300 copies to print, the first label shows somewhere 300, the 2nd label 299, the third 298 and so on.
I use a button and macro for printing selected labels, so perhaps the reverse printing could be added there if only counting up is available.
Also to make it easier, a cell on the sheet can contain the number to count down from (this is preferred on thinking about it) So I could then print 20 labels from 300 to 280 say.
View 14 Replies
View Related
Sep 13, 2006
I have used the archive and Mr Excel and cobbled together a code which does what I want - that is to use a remote cell entry to update a specific page field cell in 4 pivot tables. I then use another remote entry to do the same to two secondary Page Field Cells in 2 of the 4 pivot tables.
However, if my remote cell has a number in it that IS NOT in the the pivot Page Field List then rather than breaking the code it simply overwrites (and therefore changes the value in the pivot table Page Field List) - disaster!!
My code is
Sub testflash()
Range("B15").Activate
Dim mycell As Integer
mycell = Range("b15").Value
Sheets("Dissection Table").Select
ActiveSheet.PivotTables("PivotTable21").PivotFields("Serial Number").CurrentPage = mycell
ActiveSheet.PivotTables("PivotTable22").PivotFields("Serial Number").CurrentPage = mycell
ActiveSheet.PivotTables("PivotTable23").PivotFields("Serial Number").CurrentPage = mycell
ActiveSheet.PivotTables("PivotTable24").PivotFields("Serial Number").CurrentPage = mycell
Application.Run "'KPI Mastercopy Data.xls'!testing"
End Sub
View 9 Replies
View Related
Mar 7, 2006
I am trying to change the page set up setiings to fit to 1 page for 56 worksheets within a workbook.
View 7 Replies
View Related
Jan 7, 2007
1. I have 4 pivot tables on one sheet, all with the same page field (store name) and all relating to same data table.
If I change the store from the page field on one table, I want it to simultaneously change the other 3 tables to the same store.
2. I have a similar sheet which has charts instead of tables for which I wish to achieve the same thing.
View 9 Replies
View Related
Apr 23, 2012
My office recently upgraded to Office 2010 and we would like (in the accounting department that I work in) to change the default number formating in a blank sheet to Number, 0 Decimals, using seperators, from the current default of general format number.
I have looked for the Book.xltx file to replace but can't see it any where.
View 5 Replies
View Related
Jun 11, 2013
I have a user here at my company that is having a strange issue with Excel. When she moves a page break in her document, Excel freezes up, then once it finally makes the change (if it doesn't crash), some (but not all) of the images that are in the document resize to super small.
For instance, she may have 50 rows. Each row contains a column with an image, then a few other columns with product information. Changing a page break may cause ten of the images to become tiny for no apparent reason. Resetting page breaks seems to cause the document to explode, with cells being thrown all over the page into different locations and columns becoming uneven.
When I make the same change on the same document on my system (both using similar specs and Office 2010), this does not happen.
View 1 Replies
View Related
Feb 20, 2009
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies
View Related
Jun 9, 2009
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies
View Related
Aug 10, 2009
I have a listbox that gets filled via '.rsRS.GetRows', which works great; all rows are being displayed neatly.
However, when the recordset only holds one record, i.e. one row is desired to appear in the listbox, then the listbox changes its orientation: instead of one row with seven columns I get one column with seven rows!
The listbox properties in the local window states that the lbx.List() object has a column count of '7', but what I see looks like:
[] name
[] surname
[] age
[] zip
[] colour
[] dob
[] phone
It should look like:
[] name surname age zip color dob phone
View 9 Replies
View Related
Feb 8, 2008
how would I change the orientation on ALL my worksheets, I'm saying every single one, imagine I got like 100 for the purpose of this excercise (sorry I'm not trying to make this harder, it's just there's always that one guy that'll come on and say 'Go to Print Print Preview, then click on Setup' or something like that.
So yeah, that's pretty much the question that I have for you brainaics:
How do I change the printer orientation setting to landscape on all worksheets (maybe a loop?).
View 3 Replies
View Related
May 13, 2007
I would like to reference cells in another tab in my worksheet, but change the orientation.
For example, in Tab 2, I want to make rows A1:A26 equal to columns A1:Z1. Do I have to click back and forth between worksheets 26 times, or is there a way around this?
View 12 Replies
View Related
Feb 9, 2010
Assuming I’ve the following sample data and wishing if the output data could be formatted using some excel formulas, refer to below sample.
Sample data (Sheet1):
StudentA | Lesson1
StudentA | Lesson21
StudentA | Lesson10
StudentA | Lesson5
StudentB | Lesson5
StudentB | Lesson6
StudentC | Lesson9
StudentC | Lesson8
StudentC | Lesson9
StudentC | Lesson15
StudentC | Lesson11
StudentC | Lesson30
StudentC | Lesson13
StudentD | Lesson1
StudentD | Lesson2
StudentD | Lesson3
StudentD | Lesson4
StudentD | Lesson5
StudentD | Lesson6
StudentD | Lesson7
StudentD | Lesson8
Sample output (Sheet2):
StudentA | StudentB | StudentC | StudentD
Lesson1 | Lesson5 | Lesson9 | Lesson1
Lesson21 | Lesson6 | Lesson8 | Lesson2
Lesson10..................Lesson9 | Lesson3
Lesson5....................Lesson15 | Lesson4
.................................Lesson11 | Lesson5
.................................Lesson30 | Lesson6
.................................Lesson13 | Lesson7
..................................................Lesson8
The sample data could be long and a lot, so it's best if the formula can be made flexible to cater for this requirement.
Please refer to the attached file for some sample data.
View 9 Replies
View Related
Jun 17, 2007
Is it possible to use AutoFilter by Rows (with Orientation - Left to Right)?
View 9 Replies
View Related
Oct 15, 2006
I want the data field to change to a different field when a command button (cmd_view) is clicked. So when the command button has a caption of "Toggle to Feeds", the code changes the field from Sqm to Feeds, and changes the caprion on the command button to "Toggle to Sqm". When this is next clicked, the fields are swithed over, and the command button caption changes relative to it.
The code I have written is below:
The problem I have is when the code changes the view from feeds to Sqm, it works fine, but when the code changes from Sqm to feeds, it crashes out in the true part of the If statement on the code line ".orientation = xlhidden" with the error "Unable to set the Orientation property of the PivotField class".
As the code for the change of view is the same, apart from the field names, I am at a loss on what is the cause.
I have tried to record a macro to see if the field names appear differently, but they do not.
Sub Tog_pivot()
Dim Toggle As String
Application.ScreenUpdating = False
Toggle = Sheet5.cmd_View.Caption
If Toggle = "Toggle to Feeds" Then
'switch view from Sqm to Feeds
Range("F12").Select
' hide existing field
With ActiveSheet.PivotTables("Pivot_forecast_old").PivotFields("Sum of Sqm")
.Orientation = xlHidden
End With
' Create & display new field "Feeds"......................
View 9 Replies
View Related
Oct 13, 2007
How do you control the orientation of a floating toolbar? The code below puts the elements horizontally, while I'd like to make the toobar have a vertical format (one macro per line). I'd also be interested if there's a way to do sub-menus to organize the toolbar buttons better. how to revise the code below, and/or a pointer to where I can read about this. I tried searching google and this forum to no avail.
Option Explicit
Public Const ToolBarName As String = "My Toolbar"
Sub Auto_Open()
Call CreateMenubar
End Sub
Sub Auto_Close()
Call RemoveMenubar
End Sub
Sub RemoveMenubar()
On Error Resume Next
Application.CommandBars(ToolBarName).Delete
On Error Goto 0
End Sub
Sub CreateMenubar()......................
View 2 Replies
View Related
Apr 11, 2012
Someone Im working with says she used to change Excel to work on it on some vertical monitor. Is there a way to do that in Excel 2010 or even 2007?
Obviously I'm not talking about print layout, but viewing the whole application in portrait view, as if she turned a monitor sideways and altered the Aps view.
View 6 Replies
View Related
Feb 20, 2013
I want to put vertical values to a selected space with horizontal orientation
See the excel file : FILL IN SELECTED DATA.xlsx‎
View 9 Replies
View Related
Aug 22, 2007
I'd like to just copy or move cells or cell ranges and have lines and shapes come along for the ride, and disembark with the same orientation. E.g. if cell E29 has an arrow through his head, I'd like AA66 to after copying there.
I haven't got the knack of when I've selected enough to grab the shape. Sometimes I think I've got it but when I paste I discover that the slippery critter stayed at home. But sometimes I just cut one cell and the shapes move too.
Any advice? BTW, I stay on the keyboard, and off the mouse, as much as possible - I'd like to avoid slowing down to make mouse selections.
View 9 Replies
View Related
May 18, 2006
I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
View 6 Replies
View Related
