I inherited a worksheet with 70k+ rows of data. As shown below each row contains a record number(Col A) with the date(Col B) it was created and value(Col C). There are 5 records per day. You can see in the example below that Col A has the value 30 duplicated for each day. Is it possible to rename only the second "30" in Col A for each day?
Col A
Col B
Col C
10
1/14/2014
10
[Code] .........
I'm having a difficult time figuring out out to coordinate two cells together.
If a "1" or "2" is entered into cell A1, I would like cell A2 to have a drop down menu show a "0". If a "3" is entered into A1, I would like B1 to have a drop down menu show "1" or "2". If a "4" is entered into A1, I would like B1 to have a drop down menu show "3" or "4". Lastly, if a "5" is entered into A1, I would like B1 to show "5" or "6".
I don't know if this is possible without using VBA.
I'm trying to create a tag with a color border. What I desire is to fill the BLANK cells around the tag, A1:D1 + D1:D19 + A1:D19 + A1:19 in a certain color based on the text value of the cell B11. There are 5 different values, such that if the B11 read Red Sox - the boarder is going to be red, if it reads Houston Astros it will be dark blue, etc..
I have a similar problem with changing the color of the cell based on the month. So regardless of the year, 2014, 2015, 2016, etc... If I use MONTH() function I can just get numbers from 1-12. I want Cell C16-C18 to be certain color depending the date entered in cell C17 such that for each quarter, months 1-3, 4-6, 7-9, 10-12 they are different color.
I have had no luck with conditional formatting (and I also believe that it is good up to 3 cases only). I am decent in logic/programming language but have little knowledge with macro notation and especially how to run them in excel 2013. I do know how to start it alt+F11 and that I need to make sure that code is written under the specific sheet where my tag is located.
What I need to do is have a cell that will be say yellow until there is information put into this cell. The information could be in the format of text or numbers. The information would not always be the same so it would need to be yellow when there is no information in the cell and another colour or white when there is information in the cell.
View 6 Replies View RelatedMy head hurts from working on this all day. I have a large spreadsheet and in the top left corner I need to show the percent of vehicles that are not working out of our whole pool. I have a function that detects the color of the cell (Red is broke) and counts the total of red cells and then divides it by the total giving the percent and it is in G118 for Jan 1/2007, H118 for Jan 2/2007 etc. I made a function that will count Julian days from Jan 1, so for today I get 114. I know I need to display G + 114 columns but have no idea how to get that column name from this and always display the current one in the corner.
View 9 Replies View RelatedI am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
If a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies View RelatedI need a macro to duplicate a box i have in a sheet depending on how many rows the other tab has. In this example file ive included the macro i have now. With this macro i select A1 : R23 and press ctrl shift d, it asks me how many duplicates i want and i enter the number based from how many the test2 tab has. I would like a macro to read how many rows the test2 tab has and then automatically duplicate the box that many times . In other words automate it, instead of me having to enter the number ( this number changes depending on the file i have ).
Ive included a test file with intructions and my current macro, i have 2 tabs which need to be looked at.
The spreadsheet attached is a timesheet I use. The last column on the sheet (IV) keeps a running total of time spent on each project. I need a way that i can find out how much time was spent on projects in specific timeframes (eg 01/01/09 - 07/01/01, or 01/01/09 - 31/01/09). my initial thought is perhaps i can have a "from" cell and a "to" cell to input the dates i require and it will total the relevant cells in the rows below.
NOTE! This workbook uses VBA to auto hide any column which are dates previous to today's date so you may need to unhide them to view times logged.
it is possible to change the colour of a cell text and / or cell background depending on a value.
For example I have currently 2 cells with numbers in
G3 = 4.38
K3 = 8.68
What I wolud like to happen is for the cell with the lowest value to change to Red.
The Column letters will always remain the same but I do plan to add a lot more rows.
I have 2 worksheets, 1 with a table sorted like this (in a row):
component | start date | end date | assigned to
Second worksheet with a table like a calendar with dates and people (dates in the columns and people in the rows), every component is assigned to each person by dates.
............ | 01/01 | 02/01 | 03/01
---------|----- --|-------|-------
person 1 | comp1 | comp1 | comp2
-------- |--------|-------|-------
person 2 | comp1 | comp1 | comp3
I want the assignment from worksheet 1 to worksheet 2 to be automatically. i will set the start and end date next to the component in the first table and assign it to a person/s and it will be automatically get filled in the second worksheet (the calendar) under the person/s and under the same dates as set in the first worksheet.
You can see a template here: [URL] ........
I'm trying to figure a function wherein if I change the category, the results will automatically changes. see attached sheet.
View 6 Replies View RelatedI'm putting together a spreadsheet to do with football betting, that involves calculating various stakes and odds and probabilities. I've done pretty well, but I want to take it to the next level.
At the moment, I have 4 sheets which are completely self contained:
sheet one = betting on 2 matches
sheet two = betting on 3 matches
etc
This was the easiest way to do things when I was learning.
Now I want to look at incorporating more flexibility into my spreadsheet. I want to investigate the possibilities of having a small form to be filled in, such as the following:
Number of matches to bet on... a drop down menu for the user to choose from
and then for the visible area of the sheet to change to show the appropriate layout for their selection. So they'd choose the number of matches they want to bet on, and the spreadsheet would display what they need automatically.
I've looked at putting forms in and think I could do that quite easily, but how can achieve the effect of changing the layout/visible area depending on the chosen option?
I have bunch of sheets lets call them
Germany, France, Belgium, Poland, Russia, Data
In the data sheet I have in F1 "Germany", F2 "France", H1 "Belgium", H2 "Poland", H3 "Russia"
In each of the sheets (appart from data) I have a validation list in cell D6 listing the data sheet values F1,F2,H1,H2,H3.
Now basicaly what I need is when I select Germany from the list it would take me to Germany sheet, when I select Belgium from the list it would take me to Belgium sheet etc.
Basically the sheets have always same name as the name in the list. I know i can write the code in individually but because I have a lot of these I was hoping there might be an easier way?
I have a table showing data for 10 teams. There are however 10 different measures which are pulled from a seperate sheet using a dropdown box to select the measure.
One of the measures is example 390823 which needs to be format 390,823 so that thousands are shown, and other formats are, example, 89.9 which need to be 89.9%.
Ive gone to my other sheet and all the raw data is showing correctly with % and ,s. But my dashboard table can only have one format. How do i make it so that each measure pulls in the correct format when selected, without dragging the whole area and changing each time?
I have a small problem using the ‘sumproduct function’ which I am using it to calculate the area under curves using the following equation (=SUMPRODUCT((B10:B109-B9:B108)*(D10:D109+D9:D108))*0.5). However I have hundreds of curves to calculate the area under and the length of the data series for each curve is different, I am currently changing the length of the data series by hand. I have attached an example worksheet of 2 sets of data (the formula I am using at the moment is highlighted in blue – row 203). Is there are function or formula that I can use inside this equation to change the range of the formula depending on the length of the data series?
View 2 Replies View RelatedI am trying to make a reference to tell me when my rigging gear is due for inspection. I want the cell to change colors when a date is in range. For example i would like a red cell when the item is due or past due for inspection. A yellow cell for when the item is 90 days out from the due date. i have used conditional formating and used =E$-30<=TODAY() and changed cell to red. but when i add another format, for E$-90<=TODAY() for yellow, it will not work.
Once this is solved, i will need to make the entire row change color.
I'm using the following formula which is entered by using VBA on the worksheet change event but the cell reference 'A2' is not changing for each row, i.e. A3, A4 etc.....
Code:
=MAX(IF( 'Device Use - 4 month Period'!$A$2:$A$20000=A2, 'Device Use - 4 month Period'!$C$2:$C$20000))
I m a newbie at Excel but i have a little work project on my hands which i would like to have an excel document have cells change colour to the date
eg:
Today is 05/02/08 cells with the attached date of this should be orange
Above this date should be green (e.g 10/02/08)
and below this date should be red (e.g 01/01/07)
Also after this problem is solved, the dates that turn orange is it possible to automatically have some sort of message come up saying that "Such as such is expiring" or for the red "Such and such is expired" and would the program/document need to be open for the messages to occur?
what I want can be done in the 'Conditional Formatting' but I can't seem to figure it out.
I have a spreadsheet with specific dates down the left colum and I need that row to highlight when the date comes, and then return back to normal when the next date comes around and gets highlighted.
so for example, A1 = 1/1/2008 I need that row highlighted when 1/1/2008 comes around, then the next date would be A2 = 1/15/2008 and so on..
cell a1 has yes cell b1 has yes and i want to type yes in c1 that will change a1 and b1 automatically to a blank cell
View 3 Replies View RelatedI did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
I am trying to change the year of a date range I search from.
I have a selection of dates, I use sumproduct on a seperate page to calculate the number of entries between two dates entered in seperate cells
=SUMPRODUCT((HFRA!B4:B2000>=Summary!B1)*(HFRA!B4:B2000<=Summary!B2))
Cell B1 conatins the date 01/01/2007, and cell B2 contains the date 31/01/2007. I repeat this for every month of the year.
I want to be able to change the year of these dates in B1 and B2 from a seperate cell on another page.. so I can change the search ranges to 2008 without going into each cell and changing it manually.
i have had to change the quarters that our company works in and in doing so have to make some changes to my VBA code. our quarters have moved back 1 month so Q1 = Dec/Jan Feb now.
below is a copy of the code that used to make the associated cell font color red depending on the current date. i need to change it to be relevant to the new quarter structure.
[Code] .....
As you can see if the month value is less than 4 (jan/feb/march) it will highlight red....however i dont know how to change the range to specifiy the ranges 12,1,2 as per the new quarter structure.
I need to send an email reminder to teachers on the day they have duty. I know how to set up an email that sends on a certain date, but I am unsure how to code it when the date changes. I have attached the spreadsheet.
In cell A 53, I have the date November 24th. In cell C53, I have the email address of the teacher doing duty that day. In cell F53, I have the date November 25th. In cell, I53 I have the email address of the teacher performing duty that day. On November 24th, the person in C53 should receive a reminder email. On November 25th, the person in cell I53 should receive a reminder email. I will have spreadsheet for every month of the year. So there will be LOTS of changing dates. How do I code this when the date keeps changing?
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I have a workbook full of a bunch of sheets with the same formatting. Each sheet has data for a 2 week period.
I am making a “master” type sheet and I’m hoping to be able to pull some data from each sheet.
On each sheet:
Row 1 has dates starting on E1 and ending on AF1 (several blank/combined columns)
Row 22 has the data I want to pull, and it is one column to the right of the date. So, F22 corresponds with E1…
Ex.
One sheet looks like this:
E1 = 8/24/09
AF1 = 9/6/09
I got single amounts to work by using:
=IF((MONTH(E1)=8),F22," ")
However, I’m hoping to find a formula that would look at the entire two week period and sum the row 22 amounts for each day that falls within a certain month.
I tried:
=IF((MONTH(E1:AG1)=8),F22:AG22," ")
Which comes back false since not all days in the two week period fall within August (8).
Does anyone have any ideas for a formula that would be easily changeable, and that would pull & sum row 22 data for each row 1 date that falls within a certain month?
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View Relatedhelp.jpg
I'm new to VB. I am writing a code to insert a value in to the textbox depending on the focus.
For example if i have kept the focus on textbox1 and I click the particular date on calendar, then it should print the date on textbox1 and vice versa.
I am trying to import a several files depending on date. The first part of the name of the files that I am importing are always the same, the end changes as the date changes.
I have a user form that comes up and I pick the dates that I am looking at.
What would be the code to import those depending on the date that I pick?
When my UF comes up, I pick whatever dates, I need to import all the files in between those dates.