Check Column For Nonblank Data
Oct 1, 2008
I'm currently working on an excel project for work, to replace our production tracking to something more current (anything is better than pen and paper!). I am in charge of keeping track of cases of product made on our shift: product code, flavour, bag size, current shift scheduled #s, next shift scheduled #s, total scheduled #s, produced (on our shift), and product on hold. For the most part, I've achieved to get all of it working, but I want to take it one step further, where it is completely automated.
Normally during the dayshift, we will receive an attainment report from the scheduler, and on this schedule, it lists out what amts are scheduled for each code, for the next 3 shifts. We would then manually write down each product code running on our shift, how much we're scheduled to run on our shift, and the next shift. Before the end of our shift, we would write up another production sheet for the afternoon shift, and the afternoon shift would do the same for the midnight shift, and again for dayshift until the scheduler revised the attainment report.
My file consists of 5 worksheets: Days, Afternoons, Midnights, Product, Schedule Days, Afternoons, Midnights will be where production data is stored throughout each shift. Product holds records for each type of product we produce. Schedule holds the scheduled #s for each product scheduled to run for the next 3 shifts.
So finally getting to the point, I would like to check the Schedule worksheet, column C for any non-blank cells, and copy the corresponding product code to the dayshift worksheet starting at A3, and the same for column F for afternoons, and column I for midnights.
View 2 Replies
ADVERTISEMENT
Jun 14, 2007
i need vba to automate counting the number of nonblank cells in a colum.
i may be in a diffrent colum each time i run this so i need it to be dynamic in that sense
i need to store the result as a variable once i have the result.
i have a feeling the best way to do this would be to calculate it in the bottom most cell.
but i am unsure how to make (C:C) dynamic
=65536-(COUNTBLANK(C:C))
View 9 Replies
View Related
Jul 12, 2006
When I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies
View Related
Oct 31, 2006
I've got a problem with one of my macros. This code should import a text file. The name of the imported file is the same as the value of the cell that is active the moment the macro starts. The way I've written it, the code can't find the needed text file.
Sub addfile()
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;E:aprojects" & ActiveCell.Value & ".txt", Destination:=Range(ActiveCell _
))
.Name = ActiveCell.Value
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = False
.RefreshPeriod = 0.........................
View 5 Replies
View Related
Nov 3, 2009
I am trying to get a formula to count a nonblank cell if a date (in a different column) is between 2 date values. Does anybody know how to do this?
The spreadsheet looks vaguely as follows:
A B
Service Date
training 10.09.09
consultancy 11.04.07
diagnostic event 24.08.08
View 10 Replies
View Related
Sep 22, 2005
There will be anywhere from 1 to 5 values in each of these columns, but not
successively. There will be several blank cells inbetween these nonblank
cells, which I need stacked neatly into the first five rows at the top of the
worksheet.
Example:
(A10) - Apples
(A17) - Oranges
(A23) - Peaches
(A38) - Some other fruit of your choice...
(B14) - Toyota
(B21) - Honda
(B44) - Mercury...........
View 12 Replies
View Related
Sep 3, 2009
=IF(ISNA(INDEX($P1909:$AB1909,1,MATCH("*",$P1909:$AB1909,-1))),"Unscanned",INDEX($P1909:$AB1909,1,MATCH("*",$P1909:$AB1909,-1)))
The issue with this is that p-ab have a function in it looking up another sheet, and if theres an error is brings back nothing. But, it seems that the match function feels that if there is a function in the cell, that cell is not really blank. Whats the best way to get around this???
Example
Row O has Index Match Function coming up as "Unscanned" | Row P has a lookup function bringing back ""| Row Q has the Value im looking for as "Scanned"
View 6 Replies
View Related
Apr 1, 2008
So I have my countif if past a certain date, which works fine:
=COUNTIF(J89:J128,">="&Sheet1!$A$2)
but what I need is this...
How do I count... but only if a date is past a certain range AND the cell next to it is nonblank?
View 9 Replies
View Related
Nov 17, 2009
I have a pretty big worksheet (230 columns x over a thousand rows). Any given column might have 3-4 nonblank cells; the rest are blank. What I want to do for each column is obtain the address of each nonblank cell, then grab the contents of the corresponding cell in the B column and concatenate the results. In the attached example, I want to put the function in d2, and the expected result would be ar 001, fc 001, hw 003.
View 4 Replies
View Related
Jul 19, 2006
I need to add nonblank cells (cells have text) in a column that equal the
criteria of another cell.
So I want to add the cells in Column C that have text but also equal the date in Column A (which is equal to the date in Cell A1).
I have tried the follwoing:
=SUM(IF(A2:A19=A1,IF(C3:C19="x",1,0)))
=COUNT(IF((A2:A19=A1),C2:C19))
=IF((A2:A19)=A1,COUNTIF(C2:C19,"x"))
View 14 Replies
View Related
Oct 28, 2009
I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A.
Here is what I have but it is counting the dates in col A not the order numbers in B?
View 3 Replies
View Related
Jun 22, 2014
I am trying to check column b which hold dates then add up column c if the month is the same
B C
02-may-14 0.05
02-jul-14 1
11-Jun-14 14
20-Jun-14 0.34
26-Jun-14 15
26-Jul-14 21
This what come up with
=SUMIF(B2:B140,"02-jun-14",C2:C140)
But this will only add up dates that are 02-jun-13 I would like it to add up all dates in June.
View 2 Replies
View Related
May 27, 2007
I am tying to total all the sales for a given customer. This is what I have at present
Customer Sales
CustA 1000
CustB 500
CustA 1250
CustC 750
Elsewhere in the spreadsheet I have the following
Customer Total Sales
CustA
CustB
CustC
As you can probably see I need to get the sum of each customers sales and display this under Total Sales. I thought about using VBA but am not really sure where to start.
If anyone has any ideas how I could progress this I would be most grateful. I am using excel 2007
View 9 Replies
View Related
Jan 6, 2014
I am trying to 'tag' new part number records in a spreadsheet (see SS2 attached) - checking against a second excel which contains existing part numbers (see SS1)
If Part Number in SS2.xls (column B) appears in Item Code in SS1.xls (column B) then i would like to put a 'Y' or similar in column J of SS2.xls .
View 3 Replies
View Related
Jul 5, 2006
I have a sheet with item numbers. I basically want to know if that item number exists in my second sheet in column C. I thought I could use VLOOKUP and just return the item number itself or else it would N/A but that isn't working.
View 3 Replies
View Related
Jun 5, 2009
Basically, I need to be able to determine whether a particular letter is stored with another letter in the 'CG column' of the attached spreadheet.
The criteria is this:
1. Letter J can be present as long as there is no other letter in that column.
2. Letter B and D cannot be together in the column, but B can be with any other letter and likewise for D.
Basically, I could have a load of Js in the CG column and that would be fine. If another letter was with those Js, I need a warning box. I could have a B,H,S,T etc.....and that would be fine, but as soon as a D is entered, I need a warning. Similarly, if I had D,H,I,U,T etc......that would be fine too, but as soon as a B is entered, I need a warning again.
View 13 Replies
View Related
Feb 6, 2010
I have a column which cells are populated with codes like
BGW
3UG
WWU
1BR
UUBRG
WUBRG
7UUGGRRR
and so on. As you could see, we'll always have a number from 1 to 20 (or no number at all) followed by those letters (which can be only W,U,B,R or G). I'd like to know if there is a function to count the # of times a particular character occurs in a colum. In the above example, the "U" character appears 8 times. This would be nice to automate part of the filling process.
Just a little difference: since numbers always come before the letters, I need to treat a number sequence as a single value: 12GWW should not be seen as 1 then 2, but "twelve", like it was a single character. So, if I have this column...
URR
12WBBB
6UBG
12R
12WG
...then "12" appears 3 times. Nevertheless, B appears four times (3 on line 2 and 1 on line 3.)
View 12 Replies
View Related
Mar 18, 2009
how to write a for loop for this coding.
considering x as row,
i want to check the value in column1 for n rows.
View 7 Replies
View Related
Apr 2, 2014
Now here's my concern
Row 1 in columns A to D has contant values which came from uploaded excel file.
Now what if I uploaded a file in which column ranges only from A B C only or A C D only.
How Can I display the column which is missing.
I'll show the table below. Here's the complete table
Name
Age
Gender
Bday
asdad
12
F
121212
asdad
12
M
121212
I want to search if one of those cell (NAme, Age, Gender and BDAY) is missing. Let's say i upload a file like this
Name
Age
Bday
asdad
12
121212
asdad
12
121212
How can i show in a message box that Gender is missing.
View 2 Replies
View Related
Jan 22, 2008
how to check the column has any contents or not?
View 3 Replies
View Related
Jan 11, 2009
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
View 12 Replies
View Related
Jun 16, 2009
I have this list with articles at work. It looks like this:
1
1
1
2
2
2
3
3
3
etc
I wish to find out if any number in a column appear more then 3 times, and if it does, return that number to be. Is this possible with a formula? I've tried, but didn't succeed.
View 2 Replies
View Related
Jun 10, 2014
Obviously there is the Remove Duplicates option but I want something a bit different plus this option won't be available as the workbook is on complete lockdown.
There will always only be 214 rows to check in column B and the data cannot be sorted or it will mess a lot of things up!
Just wondering if there's some code that can check for duplicate entries because for the workbook to work, each row must have a different entry.
When the user selects this sheet a message box pops up telling them they can't have two or more entries the same but I feel this isn't enough as there's nothing actually stopping them doing this.
View 2 Replies
View Related
Dec 22, 2006
I've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
View 8 Replies
View Related
Jan 26, 2008
I have two columns A and B filled with numbers. Column A has the identifier number and Column B has number that represents intensity for the data set.
Column A can be anything from 75-1000, however, sometimes the adjacent rows are not sequential (i.e. 101, 102, 104).
1) Is there a way to automatically check for skipping numbers in Column A.
2) When it finds a skipped number, insert a row for column A and B.
3) Then put the correct number in Column A (i.e. 103) then put 0 in for column B
View 8 Replies
View Related
Jun 24, 2008
What I would like to do is have a macro check a column for any occurrence of a few different numbers, and then enter the text "n/a" in a different column of each row that one of the numbers doesn't appear in.
I have a list of part numbers that require a certain operation, and I'd like to mark off a cell for each item that does not require that operation. I've attached a simple spreadsheet that should help explain this better.
View 9 Replies
View Related
Aug 22, 2008
Does excel have a formula to check to see if every row in a specific column is blank and if it is then set the value?
View 10 Replies
View Related
Sep 30, 2008
I have a column that I want to check if a column contains any instances of particular values. If any are present I want it to return a 1, if not then return a zero.
View 11 Replies
View Related
Sep 17, 2009
I need to count all unique entries in column A (list of names) (this bit I can do!)...however:
Column B gives each name a value of A or B, I need to count all unique names with an A and all unique entries with a B.
eg
Matt A
Matt A
Matt A
Bob A
Tom B
Tom B
This would give a count of 2 for A's and 1 for B's.
View 14 Replies
View Related
Feb 7, 2014
I have some code here that I am using to find matches in Column D and then remove colored cell once the match is found. I am in putting the data line by line from a Barcode scanner and only want to run the macro if the date in Column A is today. Here is the code I am using.
[Code] .....
View 14 Replies
View Related