I need to add nonblank cells (cells have text) in a column that equal the
criteria of another cell.
So I want to add the cells in Column C that have text but also equal the date in Column A (which is equal to the date in Cell A1).
I have tried the follwoing:
=SUM(IF(A2:A19=A1,IF(C3:C19="x",1,0)))
=COUNT(IF((A2:A19=A1),C2:C19))
=IF((A2:A19)=A1,COUNTIF(C2:C19,"x"))
I need to formula to count the number of cells that meet the criteria below,
Find the letters 'AT' in some part of the cell and a blank cell next to it...
Doing a different formula for each, doesn't bring out the correct figure.
i need vba to automate counting the number of nonblank cells in a colum.
i may be in a diffrent colum each time i run this so i need it to be dynamic in that sense
i need to store the result as a variable once i have the result.
i have a feeling the best way to do this would be to calculate it in the bottom most cell.
but i am unsure how to make (C:C) dynamic
=65536-(COUNTBLANK(C:C))
I have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
I am trying to get a formula to count a nonblank cell if a date (in a different column) is between 2 date values. Does anybody know how to do this?
The spreadsheet looks vaguely as follows:
A B
Service Date
training 10.09.09
consultancy 11.04.07
diagnostic event 24.08.08
Basically, need to count rows that have 5 columns of data in it. If all 5 columns within a row have something in them greater than one character, that row needs to be counted.
View 1 Replies View RelatedIn my spreadsheet I have several columns and I have written a formula that has two conditions. If these are met the result is counted. However I want to add another condition. I need to write a formula that displays information relating to the conditions in a cell if the other two conditions are met. For Example, if the formula picks out that a row has the word 'John' and has the a number between 1 and 14 it will copy the inputted data at the beginning of the row.
View 6 Replies View RelatedI am looking for a formula that either accepts the number in a cell if the numbers on two other cells are "approved". In other words, I have on cell A1 my value to be tested. On cells A2 and A3 I have two numbers. On cell A4 I'm looking for a formula that copies the number on A1 if A2 is bigger then 0.25 and A3 is smaller then 0.35. In not, there's no copy or a N/A appears.
View 3 Replies View RelatedAttached excel sheet below. Suggest a formula to get the count of items that fall in a specific data range ?
Count of items that specify a range criteria.xls‎
I am trying to use COUNTIF formula to count how many item in a column that meet certain criteria, say between 10 and 20...
=COUNTIF(G1:G100,"AND(>10,<20)")
I have come up with 5 countif formulas that work perfectly separately but need them to be combines into one big criteria.
=countif(PM[ProjectAge],">=200"
=countif(PM[Customer Name],"*" & purch & "*"
AND so on for each criteria. H
need a formula to calculate the total number of x's in one column (column B, C, E are training types= x) where the corresponding column date falls within a date range. It’s to total each type of training done for each month. I have 3 training type columns and a cell that calculates the total number of trainings for the each month:=COUNTIF(F2:F100,">="&DATE(2008,2,1))-COUNTIF(F3:F200,">="&DATE(2008,2,31)).
So now I just need it broken down by training type per month. How many x's in each column for February as an example.
I have built the following code which should look through a data sheet and then work out the instances where it meets the following criterias:
= "Client A"
= "First letter of surname is "a"
The code is as follows:
Public rowcn
Sub compare()
Dim rngTemp As Range
Dim intCounter As Integer
loop_col = "Client A"
data_sheet = "Data"
target_sheet = "Summary"
rowcn = 2
Do.............................
I have a list of items (TR Sets) from 1 to 96 in the range B4:B99, with values corresponding to each one (Acid Number) in the range C4:C99. I would like to make a separate list that names each TR Set (using numbers 1-96) that has an Acid Number > 0.1 . Is there a formula to do this?
View 13 Replies View RelatedI need a formula that will tell me if EITHER two cells = a text word. I've tried a few things and can't seem to get it to work!!!!
See in the example of my spreadsheet below: If A2 = FALSE or B2 = FALSE then D2 should display "Allowed" if either are TRUE D2 should display "Not Allowed"
Is this possible!?!?! I've tried way to many different formulas and am close to giving up..
A
B
C
D
1
Not Slow
50%
FY
Change
[Code] ........
I want this macro todo is to start at the top of columns A to J
and work down the column and colour any cells that meet the criteria.
Range(“A1”).Select
Do Until ActiveCell = ""
If ActiveCell > 0 Then
Selection.ActiveCell.Interior.ColorIndex = 5
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
End Sub
I want to sum all cells in column A that have one of several tags in an adjacent cell in column B.
- Some of the rows in column A are not tagged
- There are currently 3 tags that are valid in column B (I, S, R), but this could increase (or reduce) in the future, say to I, S, R, E
- The possible tags are contained in a named range, but don't have to be
- It's not possible to restructure the data because the columns are in a scratch sheet, where a variety of calculations are created on the fly in the column. I've attached an example, which might make it clear
- There are several (up to 10) sheets like this in the workbook with lots of different calculations that are then summarised in to some analysis.
- The overall objective of the workbook is to be able to;
a) include/ exclude individual calcs for any one column
b) include/exclude a country - solved
Column b in sample is conditionally formatted based on it's values. I want to also apply that same formatting to the person's name in the chart in D2:I9. For example, Jeff is in bottom 50% so cell B2 is shaded red with red text. I would like to apply that same red shade and red text to all the cells in my chart that say Jeff. Also, as example, all of the cells in my chart that say Kelsey would be formatted with green shade/green text and so on...
View 1 Replies View RelatedI need to return the values in Column A IF any of the adjacent cells (columns) contain a number.
Sample data and expected Results...
Sheet2 Â ABCDEFGHIJK1DateData1Data2Â Data3Data4Â Data5Â ResultÂ
201/01/20132Â Â Â Â Â Â Â 01/01/2013Â 302/01/201311Â Â Â Â Â Â 02/01/2013Â 403/01/2013Â 1Â Â Â Â Â Â 03/01/2013Â 504/01/2013Â Â Â
13Â Â Â 04/01/2013Â 605/01/2013 06/01/2013Â 706/01/2013Â Â Â Â
1Â Â Â 08/01/2013Â 807/01/2013Â Â Â Â Â Â Â Â 11/01/2013Â 908/01/2013Â Â Â Â
1Â Â Â 12/01/2013Â 1009/01/2013Â 13/01/2013Â 1110/01/2013Â Â Â Â Â Â Â Â 15/01/2013Â 1211/01/2013Â Â Â Â Â Â 2Â Â Â 1312/01/2013Â Â Â Â Â Â
1Â Â Â 1413/01/2013Â 1Â 1Â Â Â Â Â Â 1514/01/2013Â Â Â Â Â Â Â Â Â Â 1615/01/2013Â Â Â 3Â Â Â Â Â Â 17
I cannot use VBA, Advanced Filter or a Helper column, but I could use one additional cell to hold a count, so, the solution can only be a formula.
Is there a way I can sum the result of a formula on a range of cells that meet a criteria? For example, I need to sum the difference of only the cells that are >46. (a1-46)+(b1-46)+(c1-46)...+(g1-46).
In this case the result I'm looking for is on row 2:
Is this possible to calculate in 1 cell only (h1)?
A
B
C
D
E
F
G
H
1
44.2
48.6
47.5
0.0
42.3
44.6
49.5
??
2
2.6
1.5
3.5
7.6
I've got a forecast from a customer and need to summarize it with part number, quantity and date.
The spreadsheet is part no in column a due dates in row 1 values at the intersection of part no and due date and i don't want 0 quantity to report back.
my output needs to be partno, date due, quantity.
I have a spreadsheet which is linked to several other worksheets. I have managed to include formulas to count how many cells have numbers between 101 and 5000 by using this formula -
=sum((h2:h500>=101)*(h2:h500<=5000))
but now I want to count the number of cells in another worksheet that are equal to or less than zero. When I use the same formula as above it counts all the blank cells. I have tried using a countblank formula and then deducting this from the result, but unless the other worksheet is open the countblank formula does not work.
So I have my countif if past a certain date, which works fine:
=COUNTIF(J89:J128,">="&Sheet1!$A$2)
but what I need is this...
How do I count... but only if a date is past a certain range AND the cell next to it is nonblank?
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
Create_List.xlsx
I am trying to conditionally format cells in column I (named range of ETID).
I want the cell to change shading if the cells do NOT meet this criteria:
Whole Number10 digitsstart with '0' or '1'I have this but it isn't working:
=AND(OR(LEFT($i2,1)="0",(LEFT($i2,1),1)="1"),OR(LEN($I2)<>10,($I2)<>""))
I have a have excel problem Im trying to figure out. I have 2 sheets. Sheet1 and Sheet2. I want to copy into sheet1 cell B2 the contents of sheet2 column C row x iff sheet2 column B row x = 1. There will be only one cell in that column equal to 1, so I will be copying that cells(colB; rowx) adjacent cell (colC;rowx) contents. This is what I have so far but it doesnt work. =IF('Sheet2'!B:B=1,DONTKNOW WHAT TO PUT,""))
View 5 Replies View RelatedWe were so close!. But it appears that the assumed correct answer only works if there are no repeating N. The repeating N gets the same count as the last Y and it throws off the sum ....
View 14 Replies View RelatedThere will be anywhere from 1 to 5 values in each of these columns, but not
successively. There will be several blank cells inbetween these nonblank
cells, which I need stacked neatly into the first five rows at the top of the
worksheet.
Example:
(A10) - Apples
(A17) - Oranges
(A23) - Peaches
(A38) - Some other fruit of your choice...
(B14) - Toyota
(B21) - Honda
(B44) - Mercury...........
I have a pretty big worksheet (230 columns x over a thousand rows). Any given column might have 3-4 nonblank cells; the rest are blank. What I want to do for each column is obtain the address of each nonblank cell, then grab the contents of the corresponding cell in the B column and concatenate the results. In the attached example, I want to put the function in d2, and the expected result would be ar 001, fc 001, hw 003.
View 4 Replies View RelatedI've got a problem with one of my macros. This code should import a text file. The name of the imported file is the same as the value of the cell that is active the moment the macro starts. The way I've written it, the code can't find the needed text file.
Sub addfile()
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;E:aprojects" & ActiveCell.Value & ".txt", Destination:=Range(ActiveCell _
))
.Name = ActiveCell.Value
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = False
.RefreshPeriod = 0.........................
