i need vba to automate counting the number of nonblank cells in a colum.
i may be in a diffrent colum each time i run this so i need it to be dynamic in that sense
i need to store the result as a variable once i have the result.
i have a feeling the best way to do this would be to calculate it in the bottom most cell.
but i am unsure how to make (C:C) dynamic
=65536-(COUNTBLANK(C:C))
I need to add nonblank cells (cells have text) in a column that equal the
criteria of another cell.
So I want to add the cells in Column C that have text but also equal the date in Column A (which is equal to the date in Cell A1).
I have tried the follwoing:
=SUM(IF(A2:A19=A1,IF(C3:C19="x",1,0)))
=COUNT(IF((A2:A19=A1),C2:C19))
=IF((A2:A19)=A1,COUNTIF(C2:C19,"x"))
When I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies View RelatedI am trying to get a formula to count a nonblank cell if a date (in a different column) is between 2 date values. Does anybody know how to do this?
The spreadsheet looks vaguely as follows:
A B
Service Date
training 10.09.09
consultancy 11.04.07
diagnostic event 24.08.08
I'm currently working on an excel project for work, to replace our production tracking to something more current (anything is better than pen and paper!). I am in charge of keeping track of cases of product made on our shift: product code, flavour, bag size, current shift scheduled #s, next shift scheduled #s, total scheduled #s, produced (on our shift), and product on hold. For the most part, I've achieved to get all of it working, but I want to take it one step further, where it is completely automated.
Normally during the dayshift, we will receive an attainment report from the scheduler, and on this schedule, it lists out what amts are scheduled for each code, for the next 3 shifts. We would then manually write down each product code running on our shift, how much we're scheduled to run on our shift, and the next shift. Before the end of our shift, we would write up another production sheet for the afternoon shift, and the afternoon shift would do the same for the midnight shift, and again for dayshift until the scheduler revised the attainment report.
My file consists of 5 worksheets: Days, Afternoons, Midnights, Product, Schedule Days, Afternoons, Midnights will be where production data is stored throughout each shift. Product holds records for each type of product we produce. Schedule holds the scheduled #s for each product scheduled to run for the next 3 shifts.
So finally getting to the point, I would like to check the Schedule worksheet, column C for any non-blank cells, and copy the corresponding product code to the dayshift worksheet starting at A3, and the same for column F for afternoons, and column I for midnights.
There will be anywhere from 1 to 5 values in each of these columns, but not
successively. There will be several blank cells inbetween these nonblank
cells, which I need stacked neatly into the first five rows at the top of the
worksheet.
Example:
(A10) - Apples
(A17) - Oranges
(A23) - Peaches
(A38) - Some other fruit of your choice...
(B14) - Toyota
(B21) - Honda
(B44) - Mercury...........
I have a pretty big worksheet (230 columns x over a thousand rows). Any given column might have 3-4 nonblank cells; the rest are blank. What I want to do for each column is obtain the address of each nonblank cell, then grab the contents of the corresponding cell in the B column and concatenate the results. In the attached example, I want to put the function in d2, and the expected result would be ar 001, fc 001, hw 003.
View 4 Replies View RelatedI've got a problem with one of my macros. This code should import a text file. The name of the imported file is the same as the value of the cell that is active the moment the macro starts. The way I've written it, the code can't find the needed text file.
Sub addfile()
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;E:aprojects" & ActiveCell.Value & ".txt", Destination:=Range(ActiveCell _
))
.Name = ActiveCell.Value
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = False
.RefreshPeriod = 0.........................
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedI have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
In column G I have 1 if the item is a Map, this 1 is placed there if Column H has an x. In column N I have a date
I would like to count the number of Maps that have a 1 in G AND a date in N.
I am creating a chart and want to get a count of only the blank cells in Column D only if there is information contained in Column A (same row). I am using Excel 2003.
View 2 Replies View RelatedI am trying to count the amount of cells in a column (Col H) containing data against a certain date which is displayed in another column (Col B)
Eg.
Col B................-...........Col H
13/06/09.................FIRST LAST
13/06/09.................
13/06/09.................FIRST LAST
20/06/09.................FIRST LAST
20/06/09.................
So that in the sheet next to it it would appear:
13/06/09 - 2
20/06/09 - 1
The dates don't appear in row order and the sheet has a filter on it so I am unable to select the Col H and just use COUNTA
How would you be able to count all the used cells in a specific column?
I know the following would count all used cells in a worksheet but what about a specific column?
i'm trying to count a range of cells in a column. it seems basic but i can't quite figure out the code. i just want to count the nonblank cells, not the data in them. could i use something like =if a1 = 1 and a10 = 10, counta a1:a10 to count all the cells from a1 to a10?
View 9 Replies View RelatedHow to count cells in a column that are in BOLD
I looked all over couldnt find it.
Can i get a simple formula to count a number of blank cell in a column ?.
View 9 Replies View RelatedI would like to count the number of cells that contains a date in each month.
I have attached my workbook here: Book2.xlsx
count cells row wise that meets criteria both in column & Row as well.
View 2 Replies View RelatedI have a spreadsheet that has 36 columns and 6000+ rows. Each column has a mix of blanks and content, which is an X. See example of the pattern below, column A. I want to run the COUNTBLANK function through the entire column A so that it assigns a value in column B, next to the content it relates to. Line B4, B9, and B11 would have results, in the example below. I want to be able to apply a formula the entire worksheet, all 36 content columns, and over 6000 rows, so that I can obtain the results quickly by filling down, across, etc. I suspect a loop might be in order. Currently, I have to run the COUNTBLANK between one X and another, repeating that tediously over and over again.
---A----------------------------B
1 X
2 blank
3 blank
[Code]....
I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.
View 2 Replies View RelatedI am trying to count only visible cells where column AB = Active.
This is what I am currently have .
SUMPRODUCT(SUBTOTAL(3,AB2:AB1000),AB2:AB1000, "Active"))
I am using the following to count my blank rows.
=COUNTIF(report!N2:N303,"")
Using a formula, rather than VBA, how can I modify this formula to accomodate a variable ending range. Without thinking I initially just counted the blanks in column N - yes there were lots of blanks. My goal is for the end user to not have to modify the formula.
I have the following formula in H2
=COUNTA(report!B:B)-1
which would give me the number of rows used for the month. I tried referencing the countif to cell H2 but, as of yet, have not been successful.
=IF(ISNA(INDEX($P1909:$AB1909,1,MATCH("*",$P1909:$AB1909,-1))),"Unscanned",INDEX($P1909:$AB1909,1,MATCH("*",$P1909:$AB1909,-1)))
The issue with this is that p-ab have a function in it looking up another sheet, and if theres an error is brings back nothing. But, it seems that the match function feels that if there is a function in the cell, that cell is not really blank. Whats the best way to get around this???
Example
Row O has Index Match Function coming up as "Unscanned" | Row P has a lookup function bringing back ""| Row Q has the Value im looking for as "Scanned"
So I have my countif if past a certain date, which works fine:
=COUNTIF(J89:J128,">="&Sheet1!$A$2)
but what I need is this...
How do I count... but only if a date is past a certain range AND the cell next to it is nonblank?
I want to work out how many cells in a colums are "equal to or more than AND less than or equal to" certain date ranges.
E.G. Column A has random dates from 01/10/2012 to 31/12/2012. I want to know how many of these cells have dates that meet the criteria of >=01/12/2012 and <=31/12/2012.
I have searched on here and found COUNTIF which didn't work. I also tried DCOUNT which I couldn't get to work.
Is it possible to have a column count up if two other cells meet criteria?
What I would like to happen (if it is even possible) is, if cell B1 equals CO and C1 is a duplicate, then G1 enters #1 for the first time it is duplicated, #2 for the 2nd time it is duplicated, etc.
Is this even capable of happening.
I am attaching my spreadsheet (TAB "AG Orders"). I filtered the spreadsheet so you can see an example of what I am looking for. I manually typed in column G but I was hoping these numbers could automatically populate.13-14 budget-AG test.xlsm