I recorded a macro that finds a non-blank cell in a table (always in A25:H39), populates it with values from another tab, prints it, copies it into another worksheet and clears the contents of the form but it's painfully slow. take a look at it to see if it could be modified to run faster?
VB:
Sheets("Cash Form").Select
Dim lastrow As Long, nextrow As Long
lastrow = Sheet12.Cells(Rows.Count, "A").End(xlUp).Row
[Code].....
I've got a big file with a large dataset. One of the sheets works as a screening for the data, so everytime I populate an ID number in say cell C3, the rest of the sheet updates as per the formulas I have in place. However, I need to write a code that takes ID numbers one by one from a sheet, populates them into my screening sheet, updates the sheet and saves it.
View 4 Replies View RelatedI would like the values on sheet 2 to populate on sheet 1, my guess would be a hlookup. I would like to use the acct# as the lookup value and then return the appropriate values ..
Example for acct #1002217, I want to lookup on sheet 2 the value associated with LI03 (cell D6) to come back in sheet 1 and insert in the appropriate cell (cell F4)
See this link ...
http://spreadsheets.google.com/pub?k...vdd_zO8g&gid=0
I have some buttons in different sheets in an excel file, each button has its own code, that is the reason I can not move the code related to each object to another location (sheet or module).
And I have one piece of code in Module1 (Auto_load) in order to execute automatically this routine every time file is opened. Inside "auto_load" routine I initialize some values of some check buttons,options buttons and positions of some objects in diferent sheets, but I can not pass the value of variables between Module and Sheet's code even when I declare as public variables and/or function.
I have the following structure: ...
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
I have two worksheets to combine. One of them have list of student numbers and their names, and the other has student number and their grades. I have to make another sheet that shows their name matched with each of their grades(grades are organized by date)
My thought process in this is to match the student numbers in two sheets, then combine name and grades and paste to another sheet.
How can I do this using VBA macro code?
I have a workbook with 2 sheets. Both the sheet contains Column "Name,Avg,Max". Compare both the sheets and paste the Avg values in Sheet3(Avg) and Sheet4(Max). I have attached the sample file below.
comparison.xlsx
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
with the attached spreadsheet?
I want to populate "selections" sheet with data from the previous sheet (it will be the date) depending on the value of a cell in column G. You will see I have already got the data from 27th April into my selections sheet but wondered if it can be done by a formula to save me copy and paste time?
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
I am trying to auto populate one spreadsheet from a master sheet
What I am trying to do: I have a master sheet where information on 25 countries is entered. Sheet has multiple columns for data entry I have 25 additional identical spreadsheets that correspond to one of the 25 countries so can drill down to country specifics
From the master - is it possible to select a country from a drop down menu so when I start entering data on the master it auto populates the corresponding sheet by the country selected.
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
View 1 Replies View RelatedI have a spreadsheet (Sheet A) with various data and checkboxes that I want to populate based on data in another spreadsheet (Sheet B). Sheet B has various fields with yes/no answers in the cells. I need to take this data and check varius check boxes in Sheet A based on the answers. I think this is possible if I write a macro to sweep through Sheet A to populate everything, but I was wondering if there is an easier way?
I would think there would be a way to set the initial state of a checkbox based on the value of a cell, but I can't seem to find a way to do it.
I have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Blank1").Activate
' Unprotect Sheet
ActiveSheet.Unprotect
[Code] ..........
code the following on a userform initialize event to populate a list box: If the selected item in the list box SerialNumber = "none" (lower or upper case) then populate the list box lbSamDesc with all the unique entries on the sheet "EquipmentData" in Column C (from C3 on to last entry in C), where the corresponding B cell next to it is blank.
View 14 Replies View RelatedI am trying to add some code that will auto populate cells based on entries and list selections. In the attached spreadsheet, when information is added to cells in column 'A', the date should auto populate the cells in column 'C'. When a status of "Complete" is selected from the dropdown box in cell 'B', the date should auto populate in the cell in column "D".
The code partially works in that it will auto populate columns "C" and "D", but the code errors out every time and I have to cancel the error to continue to the next entry.
Is possible to populate the headings of a listbox via code
I have a list box with three columns and need the headings to be
"Number" "Rider" and "Bike"
i've come across something that i'd like to do with regards to populating an array/variant not using a global variable.
i currenty have this for testing purposes which works, but perhaps not the best solution?
Private vntArrayCodes() As Variant
Sub populateVntArrayCodes(ByVal intArrayCount As Integer, _
ByVal strCode As String)
Redim Preserve vntArrayCodes(intArrayCount)
vntArrayCodes(intArrayCount) = strCode
End Sub
Is there another way to do this without using a OO Classes?
the following code has been devised to populate a userform listbox ("listbox1") with seven select columns (F,H,K,L,N,O) of filtered rows of a worksheet ("Data")
Code:
Sub AddMultipleColumn()
Dim rngCell As Range
Dim wks As Worksheet
[Code]...
Regrettably, there is something amuck that is preventing it from providing the expected results. Seems as though this code wishes to process all the rows, instead of just those revealed from the filter. The routine runs indefinately, and will ultimately lock up Excel and never revealing any information. On a random stop, rngCell value far exceeded the (what I felt) to be the preferred max of 28 ... the number of rows of the filter. This routine is called from within the userform's initialization code.
Question 1 ... those that are able to shed light on the flaw ...
Question 2 ... data starts on row 6 of ther database, with rows 1-5 being header. What needs to be done, if anything, to reflect this?
And question 3 ... if the worksheet "Data" were in a second workbook , would be as simple as changing this ... Set wks = workbooks("workbook2.xls").Worksheets("Data")
I have a ComboBox(mnthComboBox) on a userform. I would like to populate the RowSource using VBA Code. I have searched this forum but have been unable to find what I need.
View 4 Replies View RelatedI have 3 columns in my excel sheet,
Col A( Data)
Col B ( Invoice Description)
Col C( Result)
I have date and Invoice description column filled with data, I need to filter Column B> custom filter> contains > "Dup" and enter value as "Twice" in Column C.
again i customer filter> contains > " Canteen" then enter value in Column C as "Tea"
similarly i have 45 conditions and the number of rows are not fixed, I would appreciate very much if someone could help me to build a code with case function i can add all those conditions: ....
I am after a VBA code that I can use to populate a fax template based on criteria's
Basically I have records which are being logged throughout the day via a User form and sometimes there may/maynot be a charge. the user decides at the time. The column is named "to be charged" and is filled with either Yes/ No.
I need to be able to select the date to print or Just the same day date and print all faxes' that have "Yes" for charge This way all the information for each fax is populated and the user can just print.
and if possible mark a Colum non the master sheet as printed with a X or something
I have a report that I run off a database and extract to Excel.
It has 3 fields: Title; FirstName; LastName. For example sake lets say they are in columns A, B, C. Now in D I have a fieldname of FullName and in D2 onwards the formula: =A2&" "&B2&" "&C2.
Now I currently manually type the formula and drag it down to the same row as the last entry in the first 3 columns so that I get the full title in one cell.
I wanted to know how I could enter the the formula above in column D so that it automatically does this for me?
I tried to record a Macro as a test for column D setting the field name in D1 and the formula in D2 and got the following:
i have a workbook with two sheets. lets just call them sheet 1 and sheet 2. on sheet 1 i have data for employees and their current wages and other info. on sheet 2 the data is for compensation scale on three separate columns.......
in order for me to automatically get the data from (sheet 2 B3) the formula for sheet 1 E1 would be: ='Sheet 1'!B3. how do i formulate the equation so that i can do ='Sheet 2'!(C1)(D1)?. in other words i want to specify the column and row from the values declared in sheet 1 column c and column d respectively.
Any way to have a formula populate certain data from one sheet into another sheet...for all records in the data sheet.
I have thousands of individual locations that need to be separated by result into individual sheets.
So for instance:
In Sheet1 I have all the results as so:
location
date
chemical
result
error
A-1
1/1/2001
Aluminum
1.00
0.01
And in several other sheets I have a standard "form" set up for the way it is to appear in a report.
So, on the 'form' in Sheet2: the location of 'A-1' will have to populate in cell B6; Time of '1/1/2001' in E6; Chemical 'Aluminum' in A17; Result of '1.00' in B17; error of '0.01' in B24.
I have this concept of a table of responses that have to be generated every month or on command. These reports export from a website into a certain format, its easy for me to adjust it so it can populate a the table. Although, i want to incorparate my date picker so everytime i pick a certain date a diffrent set of data will populate from the report. it seems very possible, just need to know where to go from. Either a VBA code or a fomula to allow for this to happen.
Heres and example..(cell linked to date picker)........column1 column2 column3,(date picker from microsoft),,each has a corresponding month
.....................................................................jan
.....................................................................feb
.....................................................................etc.
say i pick january, i want these columns to give me my data from a sheet or other workbook(the january report). i want everything linked so it will do this for virtually every month of the year. ive attached an example, the only thing i can think of is to make the cell that changes with when i pick a date to link to the report criteria.
The code below works correctly on certain sheets. The code is supposed to loop through worksheets in an array, calculate the percent change from 1990 to 2012 and from 2005 to 2012, and put the calculations on the 4th and 5th row from the last non-empty row, respectively. All the sheets are identical except for 3. The sheets that are different only have a different number of years of data. For some reason this causes the macro to put the percent change calculations in random rows below the correct location. Also, the macro doesn't work correctly on one of the identical sheets.
[Code] ......
Example of how the macro runs correctly on an identical worksheet : correct.gif
Example of how the macro runs incorrectly on one of the 3 sheets that are not identical : incorrect.gif
I'm trying to figure out a way to populate rows from "Count" sheet to "Recount" sheet based off of the Difference column (Count,G) of Item Number "A" multiplied by the Item Price column (SAP,H) of Item Number "A".
So, IF [(Count,G)(SAP,H) > "X"] THEN (populate Row Item Number "A" to "Recount")
inventorySAMPLE.xlsx