I'm trying to figure out a way to populate rows from "Count" sheet to "Recount" sheet based off of the Difference column (Count,G) of Item Number "A" multiplied by the Item Price column (SAP,H) of Item Number "A".
So, IF [(Count,G)(SAP,H) > "X"] THEN (populate Row Item Number "A" to "Recount")
inventorySAMPLE.xlsx
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A
Mr. Jones 3B 3B 3B
Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri
1A
1B
2A
2B
3A
3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available")
It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
In this attached example, this is a portion of a actual work procedure. The yellow highlighted cells are the same work element within the master procedure but one is for one type of machine while the other is for same model but added options. This is a pattern throughout the entire worksheet. Basically 1 model with several different types of options. I don't want to have unnecessary elements in a work procedure.
So what I am trying to accomplish, I want to create a userform or dashboard which will allow selection of model #, model type #, then based off those selections have excel populate a worksheet with all correct procedures based off model type choice.
In this example there is 6 model variations, all share same basic procedure, but all have their own work procedure based on options, so my above approach will allow me to make changes to the master procedure only instead of changing 6 procedures.
with the attached spreadsheet?
I want to populate "selections" sheet with data from the previous sheet (it will be the date) depending on the value of a cell in column G. You will see I have already got the data from 27th April into my selections sheet but wondered if it can be done by a formula to save me copy and paste time?
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on.
from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'.
how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row?
i know this is possible i just dont know how to do it.
I am trying to auto populate one spreadsheet from a master sheet
What I am trying to do: I have a master sheet where information on 25 countries is entered. Sheet has multiple columns for data entry I have 25 additional identical spreadsheets that correspond to one of the 25 countries so can drill down to country specifics
From the master - is it possible to select a country from a drop down menu so when I start entering data on the master it auto populates the corresponding sheet by the country selected.
I have a master sheet that contains all data relating to a particular Agent like Agent Code(Primary Key), Name, Bank details etc so on and so forth. Every month I have to make a new sheet which contains only a few of the columns from the master sheet. I have to manually select and copy each column for the specific agents to whom I have to make the payments. Now, I wanted to know..if there is any way in which I can enter only the Agent Code in the new sheet and it will look the code up in the master and copy the values of the relevant fields from the master to the new sheet.
View 1 Replies View RelatedI have a spreadsheet (Sheet A) with various data and checkboxes that I want to populate based on data in another spreadsheet (Sheet B). Sheet B has various fields with yes/no answers in the cells. I need to take this data and check varius check boxes in Sheet A based on the answers. I think this is possible if I write a macro to sweep through Sheet A to populate everything, but I was wondering if there is an easier way?
I would think there would be a way to set the initial state of a checkbox based on the value of a cell, but I can't seem to find a way to do it.
I have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Blank1").Activate
' Unprotect Sheet
ActiveSheet.Unprotect
[Code] ..........
Any way to have a formula populate certain data from one sheet into another sheet...for all records in the data sheet.
I have thousands of individual locations that need to be separated by result into individual sheets.
So for instance:
In Sheet1 I have all the results as so:
location
date
chemical
result
error
A-1
1/1/2001
Aluminum
1.00
0.01
And in several other sheets I have a standard "form" set up for the way it is to appear in a report.
So, on the 'form' in Sheet2: the location of 'A-1' will have to populate in cell B6; Time of '1/1/2001' in E6; Chemical 'Aluminum' in A17; Result of '1.00' in B17; error of '0.01' in B24.
I would like the values on sheet 2 to populate on sheet 1, my guess would be a hlookup. I would like to use the acct# as the lookup value and then return the appropriate values ..
Example for acct #1002217, I want to lookup on sheet 2 the value associated with LI03 (cell D6) to come back in sheet 1 and insert in the appropriate cell (cell F4)
See this link ...
http://spreadsheets.google.com/pub?k...vdd_zO8g&gid=0
I have receipt tracker where we are maintaining daily stock so I want vb coding for populate data from one sheet to other sheet.
When i enter slip no then data should be populate automatically from issue tracker to issue slip (Only yellow marking).
how I populate a form with values from a row in my excel sheet that i selected in a multicolumn textbox.
My "tool" works like this... The user opens the excel file and can choose one of two buttons, Add defect and Find defect. When the Add button is clicked Form1 is opened and the user fills in a number of fields which are then inserted into an excel sheet (same book though). Then there's the Find button. When the user clicks this button Form2 opens with a multicolumn textbox that displays some of the columns with some of the previously inserted information. Now I would like to be able to select one row and get Form1 populated with the values for that particular row. The user should then be able to change some of the values and the changes should be inserted back into the correct row in my excel sheet. How in the world do I do this??? Right now I just open my Form1 when I select a row and click an OK button. How do I get the values from my excel sheet back into my fields?I've tried to copy code from an example I found, but I can't get it to work.
My first form where I add my data
Private Sub UserForm1_Initialize()
Dim rIds As Range
Dim MaxId As Long
Set rIds = Worksheets("Systemtest").Range(Cells(1, 1), Cells(Rows.Count, 1).End(xlUp))
MaxId = Application.WorksheetFunction.Max(rIds)
With Me
.IdBox.Value = MaxId
I have 2 sheets in my workbook "Master Sheet" and "Weekly". The "Master Sheet" contains Parcel Numbers and the groups they belong to, this information will rarely change. The "Weekly" sheet contains data that is pulled from a report weekly. It has 4 columns, the "Parcel Number", the "Parcel Name" the "Availability" of that parcel, and the "Group" the parcel belongs to.
I want to create a macro assigned to a button then when pressed looks at the number in the "Weekly" sheet and searches for it in the "Master Sheet" and populates the corresponding "Group" cell in the "Weekly" sheet with the value it finds in the "Master Sheet". I have attached a sheet that shows an example of what I need.
I have a user input sheet, where a user will input a process name & its link to the intranet. Next to the process name there is a column that takes the first letter from the process name so it can be used as an index point to transfer to another sheet. The sheet will have processes added all the time.
There is then 1 sheet for each letter of the alphabet. What I need to do is for a macro to run and then copy the name of the process in a cell and put the hyperlink in. Because there will be more than 1 process for each letter it will have to be transferred to different cells.
I recorded a macro that finds a non-blank cell in a table (always in A25:H39), populates it with values from another tab, prints it, copies it into another worksheet and clears the contents of the form but it's painfully slow. take a look at it to see if it could be modified to run faster?
VB:
Sheets("Cash Form").Select
Dim lastrow As Long, nextrow As Long
lastrow = Sheet12.Cells(Rows.Count, "A").End(xlUp).Row
[Code].....
I'll start with the attachment since it's always easier:
Attachment 327508
This file is far from finished so there is some useless stuff there. What I'm interested in is in the sheet RecapTable (and in Etiq1 to Etiq4).
I'd like to write a macro that'll populate my Etiq1 -> 4 according to the RecapTable. Data would be set up as in Etiq1 A1:A3.
I don't have to have 4 template sheets and it could change if it's easier to do something else. The goal is to print labels so I maybe only 1 Etiq is needed, and the macro could populate, print, erase, finish populating, print again
1. Count entries in RecapTable (found something that does that! yeey!)
n = Worksheets("RecapTable").Range("A:A").Cells.SpecialCells(xlCellTypeConstants).count
((2. Divide that by 65 (which is the number of labels per sheet) and round at upper number. For example: if n=100, 100/65 = 1.54 so 2 sheets needed)) [maybe a useless thing to do]
[Assuming I only populate 2 cells]
If v is the row# in RecapTable,
If w is the column# in RecapTable,
If x is the row# in Etiq,
If y is the column# in Etiq,
v=1, w=1, x=1
[code].....
I have successfully used the course booking form as a base for an input form in an accounting workbook that has several pages. (Thanks to Roy and others for the info; the course booking form on [url]is the best explained piece I have found on the net)
What I would like to do is use a range of cells to populate the combobox so that a user can make a choice from the account descriptions (from a sheet named Intro, b63:99) and have the form return the account number (Intro, a63:a99) to the relevant cell elsewhere in the workbook. The user would then have meaningful descriptions rather than numbers to choose from.
My coding for the form thus far is as follows.
I am writing a macro for a my team. I will distribute the .bas file then have them run it. I don't know what their individual sheets in their workbook are called so I need to ask them. Grab various columns from that sheet, check if they have a sheet called data import, then put in the columns in order in data import.
I have:
Code:
Private Sub checkForSheet()
Dim sh
On Error Resume Next
sh = Worksheets("Data Import").Name
If Not Err.Number = 0 Then Sheets.Add.Name = "Data Import"
On Error GoTo 0
End Sub
to check if Data import is made
Then
Code:
Sub prepareData()
Dim SCMsheet As String, TSE As String
Dim DISh As Worksheets
SCMsheet = InputBox("Enter your SCM Sheet name in entirety.")
If SCMsheet vbNullString Then
[code]....
But it doesnt stop scmsheet is not in the workbook, and the values arent put in.
I have a spreadsheet which I need to populate the data from sheet based on current date. Cell C7 in the "Staff" tab needs to update from tab "Data" for John based on the current date . The current date is located in cell A3 in the "Staff" tab.
On daily basis, as I open the spreadsheet , cell C7 should update from the "Data" tab automatically based on the date in cell A3 in the "Staff" tab. Example, on January 4 2008, cell C7 should populate as 2 from the "Data" tab. I tried using the IF formula, but I cant expand the formula for the whole month of January since it is limited only to 7 arguments.
I am having trouble with populating a combo box on a user form. I wish for the combo box to be populated using the names of the sheets of the workbook. I am using sheet1 as the control sheet where a user form will open up from this sheet, this will allow me to select the sheet that I require from a combo box that is placed on the form however I do not seam to be able to code the VBA to populate the combo box with the sheet names.
View 3 Replies View RelatedI have a big sheet and i want to create a mask where i can insert a value and in a ListBox appears all accurrences of this value and the other in the same row.
I created a listbox where, with the RowSource proprety show me LAST row where there is the value i want. Now i want a list of rows not continous in the sheet. For example i have this sheet:
A1 Jim B1 23 C1 1998
A2 Steve B2 27 C2 2010
A3 Francis B3 23 C3 1992
Now i want to search all people with 23. So i want in my ListBox appears:
A1 Jim B1 23 C1 1998
A3 Francis B3 23 C3 1992
I've been stuck with this issue for a few days now. I'm trying to populate another field with information already on the sheet. The data is demo data.
I've tried =VLOOKUP(C2,D55:E55,2,0) however it only returned 0
If I populate a cell from a cell on another sheet but plan on deleting the data on the other sheet is there any way to hold the result on the new sheet even if I delete where it came from?
View 3 Replies View RelatedFrom the excel spread sheet, while selecting from the drop down list (Deployment Model) from attached Workout sheet, the corresponding table should be highlighted from given tables and populate the same table in the Recommendation sheet from the same excel.
I am attaching sample sheet for your reference and easy understanding about the requirment.
Activities to be carried out:
Go to Workout (Sheet) --- > Select from drop down list (C2) -- > Based on Projection Volumes, list ----> It should highlight the corresponding table from below --> Pick up that particular table and Populate the same in Recommendation sheet (with out formulas, only values should come in tabular format)
I need a fix to my macro that does not specify the sheet name. It needs to populate the active sheet. Here is my code.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Sheet1").Activate
' determine the next empty row
[Code]....
I run this macro that populates 7 cells based on data in another sheet. It seems that every sheet that have formulas that point to this sheet are being stuck in in the screen updating somehow?
Basically when I press F9 to calculate or change any cell that makes the sheet calculate it has like a screen burn in of all the sheets that are being calculated. I have been able to use this as a workaround:
Private Sub Workbook_SheetCalculate(ByVal Sh As Object)
Application.ScreenUpdating = True
End Sub
But I shouldn't have to do this and it slows it down as it runs through this specific code about 11 times for each sheet that is re-calculating. Something is getting stuck in memory or something that seems to be causing this issue. This is the code I am using and I am not selecting any cells or sheets, but it appears that when I walk through the code that an image of the sheet comes up on the screen? The code in red seems to be what is causing the issues, but I do not know why? I can pass the 2 workbooks along to someone so they can see the behavior if they would like? Just let me know.
Sub populateEmployeeData()
Dim srcWorkbook As Workbook
Dim foundEmployee As Range
Dim srcWorkbookName As String
srcWorkbookName = "XIP_Employee_Data_" & Left(ActiveSheet.Range("B9").Value, 31) & "_" & Format(ActiveSheet.Range("B10").Value, "MMMDDYYYY") & ".xlsx"
If IsWorkBookOpen(srcWorkbookName) Then..........................
iam trying to populate a listbox with only the workbooks hidden sheets. iam trying to adapt this code which i found in the forums
Private Sub UserForm_Initialize()
Dim wsSheet As Worksheet
Dim lngIndex As Long
With ThisWorkbook
Redim strarray(.Worksheets.Count - 1, 1) As String
lngIndex = 0
For Each wsSheet In .Worksheets
strarray(lngIndex, 0) = wsSheet. Name
lngIndex = lngIndex + 1
Next
End With
With ListBox1
.List = strarray
End With
End Sub
I'm attempting to pull the same cell ($a$1) from multiple sheets into one summary sheet, populating a column in a table.
I though I might accomplish this by putting an array formula in the desired column of my summary sheet that was similar to the following, to pull cell A1 from every sheet between the Frst Sheet and the Last Sheet.
For example:
=FirstSheet:LastSheet!:$a$1 (CTRL+SHIFT+ENTER)
This gives me #REF errors.
The values in $a$1 on each sheet are Text (addresses)
Anyway I can do this without Macros? The number of sheets between the First and Last will vary at any given time.
