How i can encode a textbox on my userform to locate and bring all the data in the same row to the respective fields in the userform. I am working in excel 2003 vba. If you need more imformation reply me.
View 11 RepliesI am a green as green can be beginner to VBA coding. My question is, I created a text box on my user form so the user can input a 'billing code' and when they hit submit on the user form, the vba will search the spreadsheet and land on the data entered in the text box.
View 3 Replies View RelatedI'm trying to create a supplier database. before I add a new supplier, I need vba to tell me if there is a cell that contains the value i entered in a textbox. i.e.
If textbox value = "prince" then I want vba to search for suppliers that contains "prince" in existing supplier list that includes: disney pixar princess prince charming microsoft
Ideally, it should tell me that suppliers "princess" and "prince charming" is a near match.
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
Dim test1
test1 = TextBox1.Value
Worksheets("data1").Activate
Find_Range(test1, Cells, xlFormulas, xlWhole).Select
TextBox2 = ActiveCell.Value
TextBox3 = ActiveCell.Offset(0, 1).Value
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
In my userform I have a lot of textboxes. When the user clicks "OK" the values of these textboxes are transfered to row 3 of sheet1.
For this I use some of the code below:
Code:
If NaamTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = NaamTextBox.Value
ActiveCell.Offset(0, 2).Range("A1").Select
If GroepComboBox.Value = "" Then ActiveCell.FormulaR1C1 = "" Else: ActiveCell.FormulaR1C1 = GroepComboBox.Value
ActiveCell.Offset(0, 1).Range("A1").Select
If TypeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypeTextBox.Value
ActiveCell.Offset(0, 3).Range("A1").Select
If TypecodeTextBox.Value = "" Then ActiveCell.FormulaR1C1 = " " Else: ActiveCell.FormulaR1C1 = TypecodeTextBox.Value
This goes on for about 55 columns. Also, not every column is used as you can see in de code above.
It seems to me that this is not smart coding, so my question is: can you make this more efficient?
I did find some nice code with uses EmptyRow (find first empty row) but in my case it's always row 3 where de input is placed. After this row follows much more data.
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Code:
Namesalary Bonus Check
XX1000 2 FN
XY900 1 NA
YY1100 2 FN
ZY1500 3 DP
ZZ1250 2 FN
AA1050 2 NA
AZ 950 1 FN
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
Code:
SALARY DATABASE
Name SalaryBonus
What I want to do is that ---it copy all the data which fullfile condition FN and move to the Sheet 2 which is salary database. Two important things to check is that. IF name already exists in the sheet 2 then it replace old info with the new one. Second thing is to sort the whole table(Salary database-sheet 2) according to A-Z (Name column). I use office 2003. I hope I provide all the information.
when the accounts exported to excel, all the tabs shown in the file are generated. However, i need to change tab '3' to tab '10' name to the name stated in tab 'menu'. eg tab 1 need to be renamed as 'BB' (not BB/Bunut), tab 2 to 'GEN' (not GEN/General), etc. All must be capital letter.
View 5 Replies View RelatedI would like to code a Userform Command button to save data by overwriting a specific row of data. The specific row is to be based on data matching in column A and column B. I'll give an example
Worksheet = "Failures"
Row 1 - Column A - Column B - Value
Row 2 - 12/3/2012 - FOX ------ 23
Row 3 - 12/3/2012 - CEF ------ 24
Row 4 - 12/3/2012 - COT ------ 23
Row 5 - 13/3/2012 - FOX ------ 56
Row 6 - 13/3/2012 - COT ------ 23
Row 7 - 14/3/2012 - FOX ------ 26
I would like the code that would search for the specific row (e.g Row 5 discovered by searching for 13/3/2012 and FOX) in the "Failures" Worksheet and then overwrite it with the following data values from a Userform called "QC"
(TextBox1) (TextBox2) (TextBox3)
13/3/2012 --- FOX -------- 24
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
Dim S As String, X As Variant, n As Long
If Target.Column <> 3 Or Target.Cells.Count <> 1 Then Exit Sub
If IsEmpty(Target) Then Exit Sub
S = Target.Text
On Error Goto Reset
n = Application.Substitute(S, "-", "")
On Error Goto Reset
Application.EnableEvents = False
X = Application.Match(n, Workbooks("Database.xls"). Sheets("Products").Range("B1:B14000"), 0)
If IsNumeric(X) Then
Target.Offset(0, -1) = Workbooks("Database.xls").Sheets("Products").Cells(X, 1).Value
Else............................
But each time i add it in, it ether's turns off the second statement and second works or vice versa. How can make both codes work at the same time without conflicting each other.
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies View RelatedI have a userform with text boxes. When I click on the GO button on the user form I want it to search from the TextBox to the range of rows on sheet2 from start to end and if duplicate entry is found it should display a message box.
For E.g. After pressing GO button Textbox entry should search Sheet2 (where all the data is entered) from the range starting from B6 to last entry of cell and if duplicate entry is found a message box appears. This entry keeps on getting updated and so it may increase or decrease, and therefore VBA should be such that it searches to the last entry.
how to change it that it will return only unuique value to column C?
is here possibility how to make faster to search in huge table?
i want to use it for search in big table...i have defined ranges in 2 sheets, but it take a long time ..
what can i do, that will works faster?
e.g. i have this code (but i will define more as one sheet)
and it take a long time to searching only in a few cells..what will do with 7000 row ?
How can i define, that i want after pressing enter in textbox1 in sheet1 search name from sheet2. After pressing enter it will continue in search. The first founded value write to sheet1 in cell J2. The next value after next enter write it also in J2 and other enter.
View 10 Replies View RelatedI have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
I have a search spreadsheet where I click a button, and an input box appears where I put a car reg in, and it searches a different sheet, returning results on the row the reg belongs in.
I've had a slight change in spec. I now need the same function to work, but instead of an input box.. I want the user to type the reg in a text box that is already on the sheet, and then click a search button to retrieve the results.
Is there anyway to easily amend the following code to get there?
I'm using a Textbox macro to search my database for a specific date, and return the company name of all entrys for that date, into a ListBox.
Now this is the only way I'm prepared to look at doing, and I have managed to do it...... partially - as stupid as it sounds, I cant get multiple results to list in the ListBox itself, and for the life in me I cant find out how to do it.
Also, once the options have been brought back into the ListBox, I then need code which will then populate further locked TextBox's which the rest of the company info, when selected from the ListBox.
I know its asking alot (or maybe not) but I believe, (unless ive done it a really awkward way, I'm not too far away, I just dont know the code to enter, to be able to do it.
Private Sub CommandButton1_Click()
Dim Nullstring
Application.ScreenUpdating = False
If TextBox1.Value = "" Or Nullstring Then
MsgBox "Please enter a date to search for"
GoTo error1:
End If.....................................
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
How can I allow users to either select the SKU from the dropdown menu, or to type in the SKU # in the dropdown menu (C5 through F5) and have it populate the data fields for that SKU when they press the 'Enter' key?
Currently using Data Validation ='KVM Comparison Data'!$B$4:$OP$4 and cell logic to allow the information to be pulled from a hidden tab =INDEX('KVM Comparison Data'!$D$2:$OP$65,MATCH('KVM Product Comparison'!$B6,'KVM Comparison Data'!$A$2:$A$65,0),MATCH('KVM Product Comparison'!C$5,'KVM Comparison Data'!$D$4:$OP$4,0))
In short, I want to keep it the way I have it, but allow users to also have the option of typing in a SKU and pull the data up that way. I know this is possible, I just can't figure out how to do it, while keeping my current solution in place as well.
I am trying to create a search where the user types into the text box 'ItemDescription' then hits the 'ItemDescSearch' button (see below code) to pollute the list box 'lbSamDesc' with any partial matches from the specified range. Currently when I click on the button it takes about 8 seconds then no results are displayed in the List Box.
View 9 Replies View RelatedI have a Userform with a textbox in it. The user is asked to enter a serial number and press Enter. When the Enter key is pressed, I would like to search for that serial nember in "SourceWorkbook.xls", Sheet1, in column A (or B). If the Serial number is found it should be placed in "DestinationWorkbook.xls", Sheet1 Cell A1 etc. If no serial number is found I would like to display a message about it it. The workbooks are already opened.
View 2 Replies View RelatedI have a user form with a ListView box , I am trying to get 2 things done;
1- When I type a text or a number by using "Search Box" I like to search the things in the ListView box items and highlight whole row
2- When whole row highlighted I like it to show the "Ref" item (Colum 5) in the text box which is called "Invoice No". Also when clicking the row I like the "Ref" item to show in the "Invoice No" (Column 5) text box.
See attached : Aged sample.xlsm
I created a user form that has two textboxes on it. One is to enter a person's name that gets put into column A, starting at row 4, and the other is to enter a number into column B, starting at row 4.
What I would like to do is for the form to search the names that have been entered in column A for duplicates in the same range. If the name is not there already, then I would like it to operate as normal. If it already exists, then I would like the number in the text box to go into column C in the same row as the name.
Here is the code I have already on the Submit button:
Private Sub SubmitButton_click()
Dim emptyRow As Long
Sheet1.Activate
emptyRow = WorksheetFunction.CountA(Range("A:A")) + 4
Cells(emptyRow, 1).Value = Guestname.Value
Cells(emptyRow, 2).Value = Roomnum.Value
Unload Name_usrfrm
End Sub
Is this possible? I have to make it more complicated, but once I get the basics, I might be able to figure it out myself.
I'm trying to search a column to match the value in textbox1 then return to the userform the values from the same row in columns A to textbox2 and so forth.
I can get it to find the value but am struggling to get the data back to the userform
Reason for this is so the user can search an Id, get all the data back on the order before changing the Id number
The code im trying to use is
Code:
Private Sub CommandButton1_Click()
Dim lr As Long, i As Long
Dim x As Variant, y As String
Dim Found As Range
x = TextBox1.Value
y = UserForm2.TextBox2
[Code]....
I have a worksheet "database" which is database of patient information in each row, in column H I have the "pateint IP number" I have a userform for search and copy. The textbox in the userform is "search_tb1", where I would input the required IP number and search in column H for a match, which should intern select the entire row of this selected cell and paste in another worksheet "preview" in row 2.
View 1 Replies View RelatedI have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I 've made a form with the following
Private Sub cmdAdd_Click()
Dim lRow As Long
Dim lPart As Long
Dim ws As Worksheet
Set ws = Worksheets("PartsData")
' find first empty row in database
lRow = ws. Cells(Rows.Count, 1) _
.End(xlUp).Offset(1, 0).Row
lPart = Me.cboPart.ListIndex
The value's entered in the textbox txtQty return as text in the database. This is a problem when a value like 1,50 of 10,5 is enterred.
How can I solve this problem? In other words, what code do I need the add to get de entered value's in the textbox as numbers.......
This always returns "B" to TextBox26.
Code:
Private Sub ComboBox1_Change()
Dim x&
With Sheets("PLAYERS")
For x = 1 To .Cells(Rows.Count, "C").End(xlUp).Row
If .Cells(x, "C").Value = Me.ComboBox1.Value Then _
Me.TextBox3.Value = .Cells(x, "D").Value
Me.TextBox26.Value = .Cells(x, "E").Value
Next x
End With
End Sub
I have a worksheet that I need to copy and paste to > 50 different sheets in the same workbook. It contains 2 textboxes and 2 buttons - is there a way to do that with VBA?
View 1 Replies View Related