I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
I am trying to create a search where the user types into the text box 'ItemDescription' then hits the 'ItemDescSearch' button (see below code) to pollute the list box 'lbSamDesc' with any partial matches from the specified range. Currently when I click on the button it takes about 8 seconds then no results are displayed in the List Box.
I've put together a workbook that has 2 sheets that contain stock details and location info (i.e. part number, description, Location & stock level). I need to have a search function outside of the 'built-in' Ctrl+F (or Edit > Find) search function, i'd assume this would mean using VBA?I invisiage making a userform embedded within the very first sheet of the workbook and having this form be opened when accessing the worbook - maybe hide the other two sheets containing the data? Within the search userform, i would have a 'part number' & 'description' search input boxes for data input, either one could be blank but atleast ONE must be inputfor the search to work. On pressing the 'Search now' command button in the userform, any reults found would be displayed in a listbox at the bottom of the said userform. If no results found, a dialog box would pop-up saying 'No Items Matched"
I have very little experience with programming, as a matter of fact the code in the sample file is the extent of my knowledge. I want to use Excel because not everyone in the plant has access to Access, but everyone has Excel.
The idea is to allow searching for parts based on 2 different part numbers, category, drawer, manufacturer, or description (any or all).
My first problem is how to make excel search using a userform and find multiple results, not just stopping after it finds the first match. For instance if you only searched for a category it should find all results that match that category.
(I'll try to anticipate a question here: the part numbers should be unique but may not be, so using the part number as a key will not work.)
The second thing is I would like to know how to populate these results in a listbox and and have the selected part show the matching picture. (This maybe more clear after seeing the spreadsheet).
And finally, is there any way to make the comboboxes on the search userform populate themselves off of the list of data.
I apologize if any of these questions have been answered already but frankly I've been searching google for the past week and haven't found anything, (This may attest to my search skills as well, ha ha ha), and I really just want this to be finished.
I have a database of 13 columns and ever increasing rows.
I want the following to be there on my userform.
1 combobox: showing the list of categories from which to search.(The categories are the column headings in columns A1 to A13.The user will have to select one category.
1 textbox:Here the user will enter the search term.
1 Command Button: When the command button is clicked/entered, the code shall be such that it will search in the column corresponding to the category mentioned in the combobox and display the results( The entire 1 row x 13 cloumns containing the search term) in a Listbox. If the search term does not matches then a message box should appear with the message "No entries found" [b]
1 Listbox:to display the search result as mentioned above.
I am creating a database using excel and I've created a userfrom for ease of data entry and searching the database. But now I am stuck at the searching part.
The sheet is Sheet1 and the userform is UserForm1. Based on the pic that i have attached, user needs to key in the keywords in any of the textboxes and comboboxes in the group box labelled "Organizational detail" and when he/she clicks on the Search button, the userform will display the whole rows where the search results reside onthe listbox. When the user click on the search results on the listbox, the textboxes and comboboxes will be updated with the data on the listbox.
i have this userform which has a combobox for a selection of months. beside it, i have this textbox which asks for the year. scenario: if i choose January in my combobox and i will type 2007 in my textbox, the combined entry will be January 2007 that will be saved in cell A1 of Sheet 2.
I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
I have written an array formula which you can see in the, "Done something cool in excel" bit on here. Part of this project was to changed/replace three diffence cells on each pass of the loop. I used some code off here which allowed me to display ALL changed on a seperate sheet, but there way way to much data on here and really confused the user. What i would like to do is; in 1 column, for it to say "CHANGED" if the data has changed "EXSISTING" if it hasnt changed and "NEW" if its been added, this will be referencing Column I.
I am looking for the best way ( or choice of ways) to display the correlation between 2 lists of results.
I have a column of failure percentage rates for engineers that I want to compare against a second column of their compliance rate with a process. There are two levels also. The first set shows the good performers and their compliance, the second showing the poor performers.
My goal is to see whether their compliance with the process has any bearing on their failure rates. The full lists contain data on approximately 400 engineers in each category
(if the the numbers below are not in a proper format, I tried to download the excel converter thingy but the link failed)
I want to highlight particular characters in an excel cell. This cell may contain other words as well.
For example, if i search for the word "apple" in the excel sheet, only that particular word in the cell should be made bold. the cell may contain " I like apple". in this case "I like" should be left as it is.
I currently have this code that uses a textbox to search through the populated listbox and removes any entries not matching the value in the textbox. It works great, but if the backspace key is struck it cannot reload the listbox and narrow down the results again.
I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
I would like to summarize all "yes" respose contained in 15 tabs. See the attached.
I would like results to be returned to the "summary tab" when user answer "yes" in the signficant column in the "process activity 1 through 15" tabs. If the answer is yes, I would like to pull the process name, aspect and impact detail.
Is it possible to download search results in Windows 7 to an Excel spreadsheet? I searched for file names that started with a specific alpha character in a specific folder using Windows 7. The results came back with several hundred file names. I'd like to create a spreadsheet with columns for the file name and the sub folder name that contains the file. Is that possible?
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats) Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents) Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
I have a table which details an applicable fee given a level of performance. However the levels of performance can be any value and the fee level table which i need to look up gives conditional ranges such as if (out performance is) >4.5% and <5.00% then applicable fee will be 0.7%. However my table is large enough that using a nested IF formula seems unfeasable. I've attached a sample of what i mean which explains it better.
I am trying to populate a UserForm with data from a spreadsheet using a search function instead of just providing a Next and Previous search function (which works). The following code is able to search for and select the correct row on which the data resides.
Private Sub cmdBlankFind_Click()
Dim FindMe As Variant, FindCell As Range, FindCell2 As Variant, Data As Variant With Range("BLANK") FindMe = InputBox(Prompt:="Please enter search criteria:") Set FindCell = .Cells.Find(What:=FindMe, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) FindCell.EntireRow.Select Data = FindCell.Value tbxBlankAccount.Value = Data(1, 1) End With End Sub