I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I have a worksheet named "List" with static values in columns A & B. I want to search all the other worksheets in the same workbook for the one that matches the value I entered in column B on the "List" sheet. The cell on the other worksheets with the possible match is B5. When it finds a match, I want it to take the data from cell B3 on that worksheet and paste it in Column C of the "List" sheet on the corresponding row (all rows in the "List" sheet have a different value in Column B).
In other words, when "List"b7 = worksheetb5 , then worksheetb3 is pasted to Listc7.
I have a sheet1 with following column name Ab,Bb,Cb,Db,Eb,Fb and sheet two contains Ab,Xc,Eb,Sv,Db,Fb,Gm,Cb,Hb these headings are on 7 line of both excel sheet.
Now I want to check each cell under column name Ab in Sheet1 and compare it with all the cells under column name Ab in Sheet2. If both matches then update Cb,Db,Eb,Fb of Sheet1 to the corresponding columns in sheet2 for that column name.
I need a macro to start at cell "A1" on sheet1 and then find that same value on sheet 2 in column B. Once it finds that value in sheet 2, the code would copy the row related to "A1" (A1:H1) into the row on sheet 2 with the value matching "A1" from sheet 1. Once it has done this I need it to do the same from A2:A598. I thought this code below was working but it seems to erase a row from sheet 2 if it is not present in sheet 1. I need the macro to only update the row if the information in column A on both sheets is the same. Here is the code I am using
Code: Sub FindStr() Dim rFndCell As Range Dim strData As String
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
Copy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
I'm trying to collate data from two sheets (sheet1 & 3) , paste it on sheet5 and do some calc. But the macro keeps copying the same row after 2 iterations. Also the find function stops working after 1st iteration. Not sure what to do
Sub Macro17() ' ' Macro17 Macro ' ' Sheets("Sheet1").Select Range("B3:L3").Select Do Until Selection.Row = 10000 Selection.Copy
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
I am trying find a match from multple "text" values.
The values I'm using are flight numbers from sheet "Indiv case" in column (range H2:H51). The flight number could occur multiple time in the column.
The associated flight number sheet "Code & categories" in column (range H2:H257) are associated with the last port of embarkation (range I2:I257) in "Code & categories" sheet.
I need to copy & past the name of the Last port of embarkation from sheet "Code & categories" into sheet "Indiv case" adjcent to the flight numbers in column (I2:I51).
Example: Sheet "Indiv case" from Column (H2:H51) Fligh number Data: UA863, VA4148, EK432, BA15, BA15, VA98, QF8, AC33 etc Using these value from "Indiv case" from Column (H2:H51) search and match valuse in "Code & categories" in column (range H2:H257)
If match found copy valuse from sheet "Code & categories in column (i2:I257) in to sheet "Indiv case" into column (I2:I51) Last port of embarkation".
H2;H257, I2:I257 Flight, Last Post 3k111, Singapore 3k131, Singapore AC33, Vancouver
Copy and Past "Last Port" into sheet "Indiv case (I2:I51) adjcent to matching flight code.
I've created 12 identical work sheets for the year, each has 6 columns of data and 87 rows all containing different information (letters, numbers, dates and characters).
I've also set up a "Conditional Format" rule so that any identical information triggers a strikeout (line through the cell entries) of the entire row for both lines of offending duplicating data. To do so, I created a use cell off to the side (in column AT) with the command =CONCATENATE (u41,v41,w41...) which condenses all data into 1 cell.
Afterwards, I went into Conditional Formatting and created the strikeout command with =COUNTIF($A$T$29:$A$T$116,$AT29)>1; where the $AT29 reference simply identifies the cell to the left and then continues down.
This has worked well but I'm stumped. Now I want the reference to extend to the previous month, lets say I'm in February and want to extend the search to Januarys AT29:AT116 review.
simply use a reference in the COUNTIF formula in the Conditional Formatting rule that takes the search through to the January work sheet, then I can simply duplicate the command for the March sheet which will then review all 3.
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN SHEET-2 CCI CONTAINS ONLY 19 COLUMN FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1 A B C D 11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1) 33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4) 55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2) 22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11) 44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2 A B C D 11111111Nut, Flange 1.00 1 22222222Bolt, Hex 4.00 11 33333333Bolt, Squared 4.00 4 44444444Bolt, Screw Type 2.00 3 55555555Bolt, Coated 3.00 2
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code: Sub SummaryCalculations() Dim lr As Long Dim i As Long Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I have 1 workbook, with 3 sheets. Sheet1 (EVER) has 3000+ rows and 12 columns of customer information. This sheet is for all customers who have ever placed an order. Sheet2 (06-07) has 1500+ rows and 12 columns of customer information. This sheet has all customers who have placed an order in the last 2 years. Sheet3 has 1 row, which consists of the column titles (12 columns) that are on Sheet1 and Sheet2. I need to put all customers that are on Sheet1, but not on Sheet2 in Sheet3. I have tried VLookup; advanced Filter and a number of codes in the last 3 days and have not been able to figure this out.
I want some vbs code on my 'Copy All' button in Email Data sheet which will do my work. Its a bit lengthy but who knows the concept will find it easy.
I have one sheets -
Sheet attached - Worksheet .xlsm
Workshet.xlsm [Data in 'Mod' sheet i)should convert from text to column and paste in 'Row Data' sheet ii) then transfer form Row Data sheet to 'Email Data' sheet 'Mobile Data' sheet and 'Other Data' sheet when Copy All button is clicked in Email Data sheet.
There should be some logic which will fetch appropriate date from 'Mod' sheet to the respective sheet . We can have some kind of logic like
If 'Register' found then take the value of register and workstation and paste in Email Data sheet.
All data below should be fetched from Row Data sheet which is blank now and will get the data when we click the Copy All button ,
1st Register Count:
Below Register Count (*) i.e. 16 If workstation count present copy to E15 in Email Data sheet in Table B
Below Register Count (*) i.e. 9 If register count present copy to E16 in Email Data sheet Table B
2nd Register Count:
Below Register Count (*) i.e. 8942 If workstation count present copy to C15 in Email Data sheet in Table B Below Register Count (*) i.e. 2883 If register count present copy to C16 in Email Data sheet in Table B
3rd Register Count:
Below Register Count (*) i.e. 0 If workstation count present copy to E18 in Email Data sheet in Table B
Below Register Count (*) i.e. 1 If register count present copy to E19 in Email Data sheet in Table B
4th Register Count: Below Register Count (*) i.e. 98 If workstation count present copy to C18 in Email Data sheet in Table B Below Register Count (*) i.e. 999 If register count present copy to C19 in Email Data sheet in Table B
Substr: B32:B44 will be pasted in C29:C41 in Email Data sheet in Table C i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0
B50:B62 will be pasted in B29:B41 in Email Data sheet in Table C i.e. 10 to 22 values should match in corresponding 10 to 22 values in Email Data sheet , if not not any value then 0