I have a column with different letters in it. If this column DOES NOT have an L, H or F than I would like it to add a K.
If the column DOES have a an L, H or F then I would like it to remain as is and not add the K.
I have to determine based on average number of weeks on hand whether an Item is Overstock, Obsolete, or Normal. I've got that taken care of with some If statements (I'm sure there's a cleaner way to do this but I've not figured that out yet.)
But I need my if statements to be conditional to whether or not an item is seasonal. with 10,000 active SKU's Its a little bit much to manage those in my excel copy of the item table so I wanted to make an exclusion table where I could just key the item in and the months it would be considered active in stock. This needs to go into the If statement on the items table that looks at the current date and says if it's less than six months old it's a "new item" but if it's six months and a day then it's a normal item, then ignore both if it's seasonal and just be a seasonal item if it is on the exclusion worksheet.
I'm attaching this incase anyone can offer any ideas. It would be much appreciated. I had to delete a ton off of the spread sheet to get it to upload, and the data is dummied to keep company inventory confiential.
I wish to use a formula to highlight a date based on two criteria in two separate columns;
The first is the Date that will be in Column B.
I want it to highlight the date if : Today() is greater than that date in the cell plus 5 years (or 1824 days)
The second criteria I want is for the date to be only highlighted if the corresponding cell (in column A) does NOT contain the term ("Basic")
I have the formula:
=AND((TODAY()>(B1+1824)),A1=("Basic"))
which highlights the date correctly IF the term in Column A is "Basic" : But I cannot figure out how to insert the NOT statement to make the formula flip around so it only highlights those dates older than the 5 years requirement and NOT contain the "Basic" in column A.
I have several rows with data in and what I would like would be to total the amount of time "CU" is displayed and if that number is less than say 10 the formatting is applied. I need if possible to be able to do this via the one condition.
View 2 Replies View RelatedI type this formula and it work only for the first and the last condition, for the other condition it return to me FALSE. i dont now what is wrong,
=IF($C$10=1200,$E$10
Can you do a IF statement in Conditional Formatting? I need a column to highlight Red if there is a blank in it based on the current time COMPARED to the stated time in another column (on a separate tab)
So if current time is 1:30 PM and the stated (appointment) time on the other sheet is 1:15 PM, and my control field is still blank, I need it to turn Red.
I guess because I use a drop down box and another cell reference for the date, my IF/AND statement isn't recognizing the date and therefore gives me a "FALSE" result. I have the date formatted as a date.
I've tried referring to cell I2 which is the drop down box - that doesn't work. I've tried using quotes around the date as if it were text - that doesn't work. If I use just the w10=3 part, that'll work fine but it must be associated with the proper week otherwise every 3rd of the month that falls on a friday will be a holiday.
How do you do two "if" statements?
I need to have two tests before i get a final result so i need to know the protocal to get two if statements.
I want to conditional format cells with an if statement (something to that nature). I attached an excel file to aid in my question. Basically I want it to be color coded to alert users Red if no action is required because info is left out Yellow if info is available so take action Green if all is complete and nothing needs to be done.
If G2 does NOT have data then cell H2 has red fill
If G2 does have data then cell H2 has yellow fill
And finally if I2 is filled out cells A2:I2 are green filled
I have a list of 31 values in separate cells. The values are three digit letter codes. Here is an example of 5 of them:
ATL
GMI
WOB
COI
PTS
What I am wanting to do is have a Conditional Format to change the color of the cell to Pale Blue if the value equals another cell that is within a range.
I am trying to find a way where I can just enter the information into one and have it flood to the other.
worksheetA is the master sheet which contains data on all accounts - the order and number of entries on this account changes monthly.
worksheetB shows data only on a single account.
What I am looking to do is to take the account name from worksheetB find the data I entered in worksheetA and have that flow to the apporitate cells in worksheetB.
Something like this
cell on worksheetB displaying number of vehicles - if worksheetB(cell with the account name) = worksheetA(range of cells with multiplenames) if the two match somewhere on the list then display the number of vehicles from a cell in another coloum same row.
sorry if its confusing, tried my best to explain it. I'm sure it can be done with VB but just don't know that one much, is the syntax and language similar to the old ms basic?
1. Pupils have a target grade
2. Pupils can either do a higher or foundation Tier exam depending on their ability
3. Pupils do 9 modules and the grade bounderies are different for each module.
3. I use bar charts to report the results back to pupils and parents. Instead of just telling them you got 50% D your Target is C. I also want the target grade to be converted to a mark.
I do not want to create another woorksheet inorder to use Vlookup.
4. I now know that Index and Match can do the trick of reading the left columns. But I cannot get them to first consider the Tier for each student.
I was thinking of usind IF
IF Tier is Higher then Index the Higher Table and Match else Index Foundation Table and Match to get the mark. But I do not know how to express this in a way that's readable by Excel
HOW I CAN USE IN EXCEL VALIDATION DROP DOWN BELOW CONDITION
=IF(B1="Assets",[Mapping.xls]Assets!$A:$A,IF(B1="Liability",[Mapping.xls]Liability!$A:$A,""))
I have the macro below that I want to use to conditionally delete all columns where the first row of each column does NOT have the following values but it seems to be deleting most of these columns as well all the others.
Fellow Excellor
Sub Deletecolums_Conditional()
Application.ScreenUpdating = False
[Code]....
In s74 I have the formula
=COUNTIFS(C:C,"Holiday Inn Express Limerick",I:I,1)
And it gives me a count of 21. Is there a way where I can use conditional format to highlight those 21 instances?
So, Excel reads my formula. It tells me it's correct, but it has too many statements. [I know this is true, because the equation is absolutely huge. )
The thing is, I need it to tell me, based on two separate columns - one being "State" and the other being "A vs. O", who this contact belongs to. [For each state, there is a different person for A and for O, and the entire spreadsheet is text.]
My ridiculously large, almost functional function is:
=IF(AND(RC[9]="WA",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="WA",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="MT",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="MT",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="ID",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="ID",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="OR",RC[13]="APP"),"Kyle Johnson"),IF(AND(RC[9]="OR",RC[13]="OPP"),"Tom Wieske"),IF(AND(RC[9]="CA",RC[13]="APP"),"Tom Wieske"),IF(AND(RC[9]="CA",RC[13]="OPP"),"Tony
[Code] ....
As you can clearly see, there are a lot of terms, but I need both the "State" and the "A vs. O" column to determine the outcome of the column the formula will be in.
I need to write a conditional statement that checks for the value of a cell and assigns a percentage based on the value in the cell. Nothing I have tried works....
Here are the results I need:
If value is 1-3, then 50%, else
If value = 4, then 45%, else
if value = 5, then 40%, else
if value = 6, then 35%, else
if value = 7, then 30%, else
if value =8, then 25%, else
if value =9, then 20%, else
if value =10, then $500
Set MyRange = Range("A1:AZ9615") ' Range to apply format to
For Each Item In MyRange
Select Case Item.Value
Case "1780", "1800", "1810", "2050", "6170"
Item.Font.ColorIndex = 3
'x = 3
Case Else
x = xlNone
End Select
Item.Rows.Interior.ColorIndex = x
Next Item
I want it to search that range and turn those Numbers in Quotes to Red, which it works fine, but Somtimes those numbers are Imbedded in a string excample "1810-1-DAV". So my Question is When It turns my normal numbers red, how can I get it to turn the STRING RED ALSO?
I am trying to eliminate the use of formulas for conditional formatting in my code. I heard that the CASE statement might work for this. Below is the code I have but the case does not like the second case statement.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range(("S2:V" & TTRows), ("W2:W" & TTRows))) Is Nothing Then
Select Case Target
Case Is >= 0.8
icolor = 3
Case is >= 0.7 and not >= 0.8
icolor = 6
Case Else
icolor = 0
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
I want to copy a row based on a certain condition. I have 700 rows of data on sheet 1. If Cells in column A contain an X, copy row A# to sheet 2. If there are more than cell that has an X copy all of the rows, naturally. Can this be done with a simple conditional statement, or am I going to need to generate an array, then write that array to sheet 2?
View 4 Replies View RelatedConditional formatting. I have been tasked with creating a simple game for a group training project.
The game consists of users filling in the answers to questions (simple one word text answers). My boss wants to have a master sheet with the correct answers, and a subsequent sheet that will then compare the employee's answer to the master sheet. If the employee's answer is correct, then the output sheet simply displays the correct answer, however, if the employee's answer is wrong, he would like the output to display the correct answer and highlight the cell.
Is there a way to have the output sheet highlight a cell only when the answer on the employee sheet is different from the master sheet? I was thinking along the lines of using an if statement to see if the values of the employee sheet differ from the master sheet, but I do not know how I would then use that result to highlight the cells in the output sheet.
I created added conditional formatting to the Response Due column, to keep track of when response was due.
I only want the conditional formatting to be applied if the cell next to it is blank.
For example, the last one on my attachment is due 3/26/14 but I have already submitted a response (see column K)
What can I add so that only those dates next to a blank in column K get the conditional formatting?
Sample.jpg
I have several worksheets in a workbook that has dates of completion of
various training topics. Some of these topics require annual (12 months),
bi-annual (24 month), 6-month, or even 2-month re-training.
What I am trying to accomplish is to automatically shade all cells for dates
that fall within one month of these periodicities based on the computer's
clock when a workbook is opened. Unfortunately different columns have
different periodicities so what I was planning on doing was putting that
monthly number in a cell ("12" in A1000, for example for all Column A
values). When the file is opened, if any of the dates in column A are more
than 11 months from today's date (A1000 minus 1), they are within one month
of needing to be re-trained and I want the cell shading to be a light
yellow.
I am attempting to add conditional formatting (yellow fill) to cells that are greater than 15% or less than -15%. I've tried the following formula but, it highlights all cells.
=or(b2:b5>15%,b2:b5
I've been working on this project to propagate certain products through multiple categories. I chose to use excel to assign multiple categories to each product. On sheet1 I have setup products (column a) and qualifiers in the following columns (color, model, etc). What I would like to achieve is for the user to select yes or no for each category column and and if yes then have the corresponding category breadcrumb string (from sheet2) inserted into one specific column in sheet3. As the user continues to select multiple "yes" from the category columns for that single product, those additional category breadcrumbs get inserted at the end of the list in sheet3.
View 9 Replies View Relatedi am trying to automate altering a DAT file. Basically, each line of data in the DAT file contains an entity name, an account name, and a value. for some of the accounts, i need to change the entity name. for all other accounts, i can leave the entity name alone. if i copy the DAT file into Excel, and use text to columns, how can i create a macro to compare the accounts to a range of cells containing a list of the accounts i need to alter the entity name for, and then change the entity name if there is a match?
the account does not need to match perfectly, the accounts i input only needs to contain the reference account. the list of accounts and the entity name i need to change to are in cells on another sheet. i thought about doing a loop to run through each line of data, but i am not sure how to do that.
I want to highlight a cell if the text displayed from an IF formula is equal to the cell content.
CELLS BK10:BN10 are merged and have entered into them the following text "SELL"
Cells BJ20:BP20 are merged and contain the following formula which currently results in the cell displaying "SELL"
=IF(BM22<=-0.08,"SELL", IF(AND(BM22>-0.08,BM22 < -0.03),"NO INDICATION", IF(BM22>=-0.03,"HOLD")))
Cell BM22 is a percentage calculation of the differences between two different days of volume for this stock and that formula is: =(BH22/BH25)-1 Cell BM22 currently is calculating the result to be -65.65%
When I set up a CLASSIC Conditional Formatting using a formula (="If($BJ$20=""SELL""") to check the if the text in cells BK10 match the text displayed in cell BJ20 - I get no error messages and no formatting?
I am using Mac Office Excel 2011. I feel like I have tried everything including changing the Number selection type of the cells to TEXT. Nothing seems to works.
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
I am currently using an Intersect statement in a worksheet module to perform two things:
1. Insert a time stamp into row 2 when row 1 has a price inserted
2.To clear that time stamp if the price is deleted at some later date.
My problem is with the time stamp value being deleted by the user.
If I try to clear the price (now that the time cell =empty) I get a Runtime error 91 - Object Variable or With block variable not set.
I would like to convert this code to a select case statement but I'm not sure how to do this in this situation. Would error coding be appropriate in this instance?
I'm trying to set up an if statement that will recognize that if a cell is FHR it will do something...but if it's PHR it will do something else. I think I found the place where I keep getting an error but I'm not sure how to go about fixing the issue.
View 2 Replies View Related
