Convert Table Into Three Columns
Aug 27, 2009I am trying to convert a table into three columns so that I can use the data in a vlookup.
View 8 Replies
ADVERTISEMENT
Convert The Data Shown In Table 1 To Table 2 Without Rearranging The Columns And Rows
Sep 11, 2009Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
Convert Layout Of Excel Table To Make It Suitable For Pivot Table
Mar 27, 2012I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.
Convert Detailed Table Into Summary Table
Nov 2, 2009I have received a database containing listings of products and their sales, by month (see left side of attached file). What I actually need is to have this table converted (transposed) into a “flat database” which I can later manipulate with a pivot table (see desired output on the right side of the attached file). In the attached file I have drafted the desired output format of 1 line from the raw table, which I would like to get.
What I am looking for (if I might be so bold and ask) is a macro that will allow me to have a simmilar result for ALL the lines (there can quite a few). I think this output format can be achieved with a few simple loops, probably nested, but unfortunately I was not able to find the right sequence (being a novice in VBA).
I have tried to find the answer here, between all the posts regarding “transpose” but couldn’t find something that looked (to me) as containing a relevant solution.
How To Convert Data Into A Table
Mar 4, 2013I am doing a literature review and at the moment I have a table where I am listing all articles and ticking of their "theme", "theories used" and "methodology" like this:
How_do_I_get_from-this.jpg
Now I need to map the theories onto the articles, like this:
to_this.jpg
How do I accomplish this? (in an automated manner, obviously)
I hope the pictures are sufficiently self-explanatory, it is kind of hard to explain what I am trying to achieve otherwise. Note that ticking boxes is accomplished by changing the font to wingdings 2 and using uppercase P for checking a box. I know there are real checkboxes for this purpose, but I am generating the table from imported data and can't find another way to program excel to tick boxes if a condition evaluates to true.
Go to this link to download the original file: [URL] ....
Convert A PDF Table Into Excel?
Dec 5, 2013How do i consistently convert a PDF table to Excel? When in the PDF i am recognizing the text and then trying all available ways to either copy or export the selection (to all available file types!) but it only works in a usable manner about 10% of the time....
View 5 Replies View RelatedConvert Matrix To Table
Jun 4, 2014I need to convert a Matrix to a Table. Something like this:
Input file:
Capture1.PNG
Output :
Capture2.PNG
Convert List To Table?
Jun 14, 2012I have three columns of data starting in row 5, the headers of these columns show Origin, Destination and mileage. Is it possible to have a macro that converts the data into a table?
View 2 Replies View RelatedConvert Table Into A List
Jun 3, 2014I am trying to convert a table into a list, please see the example, I want to convert this table
10547
aaa
140x200
160x230
300x400
10549
bbb
140x200
150x260
[Code] ........
Convert From Table To A List
Sep 18, 2008I need to convert this kind of table to a list (like in below example)
Can someone give me an instruction or macro to do this ?
Table
X Y Z
A 3 5 7
B 2 4 6
C 8 9 10
List
Column1 Column2 Column3
A X 3
A Y 5
A Z 7
B X 2
B Y 4
B Z 6
C X 8
C Y 9
C Z 10
Convert Layout Of Table
Jul 13, 2007In the attached file you'll find an original table and the requested Table in its new layout. I thought to use TRANSPOSE in an Array- Function but it didn't work as expected. However, I managed to present the DATA (light green range) with the help of SumProduct. My Question goes like this: Is there a way to present the Upper and Left Headers (in red font) with Formulas ?! (I typed them by hand).
View 2 Replies View RelatedConvert Frequency Table To Vector?
Jul 4, 2013I have a large frequency table, the dataset looks like:-
Category Age Frequency
A 1 4
A 2 3
A 3 2
B 7 1
B 8 3
C 4 2
C 6 4
I would like a formula to get:
A B C
1 7 4
1 8 4
1 8 6
1 8 6
2 6
2 6
2
3
3
How To Convert Table Entries Into 1 Column
Jan 23, 2014I have a table with Companies in a column and Countries in the heading row. Now in this table I have an entry "1" against certain countries for each company.
I need to get a concatenated (Company&Country) list, but I need this is all in a single column.
Companies list.xlsx
Convert Table Data To Another Sheet?
Aug 21, 2014I have a table in Sheet1 and it's about of student's name, lessons and class.
I want to create a macro which convert to all data like Sheet2.
Fit And Convert Data To Table Template
Dec 22, 2009Need to fit my raw data (Raw Data Sheet) to fit my table template.
Need to convert my daily data to weekly to fit to my table template.
Please see attached file for reference.
Convert Table From Wide To Tall?
Sep 26, 2012How can I convert the top dataset to the bottom dataset?
Row Labels
2011.13
2011.14
2011.15
[Code].....
Automatically Convert Table To Database
Feb 1, 2006I've posted an example workbook that has sheet1 as how the data comes and sheet2 as what I need it to look like (through some kind of automatic process). I really don't have a clue as to how to get this done, and I'm guessing some VBA is going to be required.
View 3 Replies View RelatedConvert Table To Concatenated List
Oct 9, 2007I would like to convert the data by VBA macro from a table format into a list format. The convention of the TABLE data is as follows:
First row is Header Titles
[TABLE]
[SITE],[LOC],[PROD], [MTH1], [MTH2], to ->[MTH12]
North, Office, Cooling, 100, 125, 85
[/TABLE]
I would like the data to be provided into a list format for each month.
For example:
[TABLE]
Row 1: North, Office, Cooling, Month 1, Value
Row 2: North, Office, Heating, Month 1, Value
Row 3: North, Office, Electricity, Month 1, Value
Row 4: North, Retail, Cooling, Month 1, Value
Row 5: North, Retail, Heating, Month 1, Value
Row 6: North, Retail, Electricity, Month 1, Value
etc
[/TABLE]
Match Columns Of One Table To Another Two Columns Of Another Table
Jun 27, 2007I need to Match to columns of one table to another two columns of another table, both tables are on the same worksheet.
One table has 500 rows more that should not be, I need to find out which of these 500 rows should be deleted, so the two tables should be same. So the batch number and corresponding amount should tie to another tables batch number and amount.
Convert Two Dimentional Table To Single Dimention
Aug 8, 2007I have a two dimentional table that I want to be able to convert to single dimention records so I can import into database as records.
Sample two dimentional table
Description, Week1, Week2, Week 3,
Widget1, 200, 100, 150
Widget2, 75, 25, 30
Widget3, 10, 20, 30
I want to be able to convert above table into format as below
Widget1, week1, 200
Widget1, week2, 100
widget1, week3, 150
widget2, week1, 75
widget2, week2, 25
widget2, week3, 30
widget3, week1, 10
widget3, week2, 20
widget3, week3, 30
I do this each week with with approx, 40,000 records, (single dimention) copying and pasting is becoming a chore. Does anyone know a method to address this via functions, macros, formulas, etc. Number of rows and columns vary each time I repeat the exercise.
Excel 2010 :: VBA - How To Convert A Range To A Table
Jan 27, 2014I am relatively new to VBA and am trying to convert a range of data to a table in the same sheet. I receive the following message when I try to run the code as shown below:
"The worksheet for the table data must be the same sheet as the table being created." The code stops on the third line of the code.
Sheets("Data Forwards").Select
ActiveSheet.Range("$A$1:$U$1000").Select
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$U$1000"), , xlYes).Name = _
"Table1"
ActiveSheet.Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleMedium2"
I can see that the range is highlighted in the sheet before the code breaks.
Convert Row To Multiple Columns
May 20, 2007I am work a worksheet that contain the data like that
A B
NUM1 Jene,Joly
NUM2 Jene,Selo,Diff
MUM3 Tino,Selo
………………
this worksheet has over 1,000 data.
i want get the result in sheet2 as below:
A B
NUM1 Jene
NUM1 Joly
NUM2 Jene
………………
i write the code
[PHP]Sub test()
Dim i As Integer
Dim arr() As String
Application. ScreenUpdating = False
On Error Resume Next
For i = 1 To Cells(Rows.Count, 1).End(xlUp).Row
arr = Split(Cells(i,2), ",")
For J = 0 To UBound(arr)
With Worksheets(2)
LASTROW = .Cells(Rows.Count, 2).End(xlUp).Row + 1
.Cells(LASTROW, 1) = Cells(i, 1)
.Cells(LASTROW, 2) = arr(J)
End With
Next J
Next i
Erase arr
Application.ScreenUpdating = True
End Sub
[/PHP]
the defult of this code is that it will take long time to get the result.so,i want to know how to make the code run fast.
Pivot Table - Convert Cell From Number To Text
Jun 25, 2014I have a pivot table & want use the following to convert the cell from number to text under the Format Cell -> Custom. If I just type in [=1]"COA Denied";[=2]"Deferred to Future Class"; .... it works
However, I add more condition after , it won't work
[=1]"COA Denied";[=2]"Deferred to Future Class";[=3]"Offer Accepted - Confirmed";[=4]"Offer Declined";[=5]"Offer Waitlist Position";[=6]"Student Withdrawal Post Interview";[=7]"Waitlist Declined";
Convert List To Table And Stay Updated Dynamically?
Aug 21, 2014I have a list or log that is updated by a number of people on a sharepoint file. The list consists essentially of 2 columns - lets call them Location and Date.
The Locations are populated from a pulldown list but can be repeated a number of times throughout the list. I have the list set up using Table Formatting so the range updates dynamically
Example:
Location Date
Site1 8/1
Site2 8/2
Site3 8/3
Site4 8/5
Site2 8/6
Site2 8/7
Site3 8/8
As this list gets items added to it I want to populate a summary table on another sheet showing the dates each site was visited like this...
____8/1 8/2 8/3 8/4 8/5 8/6 8/7 8/8 8/9
Site1 X
Site2 -----X-------------X---X
Site3 -------X
Site4 --------------X
(Had to add dashes above to get the X's spaced out properly)
I'm competent with lookups and such but I imagine this needs an array formula or some index/match combination which I'm a little weak on.
The solution should also not require any updating as the source list is updated periodically.
Convert Table Into List With Column & Row Headings Appended
Sep 29, 2006I have a table with unsorted Time Data and Headings for each Row and Column (See attachment). I need to display this data in another worksheet as a scrollable list.
Then when I click on any list item, it displays only that data in the following format:
A1 = Time. A2 = Row Heading. A3 = Column Heading.
Easier to understand if you view the simple spreadsheet attached.
Convert Columns To Rows With DATA
Aug 5, 2008i have a problem in copying many columns to to rows that originally contains data, this is gonna be really complicated so here is wt i want, let's assume i have this table .....
View 6 Replies View RelatedConvert Several Rows Of Data To 2 Columns?
Mar 5, 2013I am trying to convert some data...
I have a spreadsheet of 1000 rows on my spreadsheet and I am trying to convert them to 2 columns. Below is an example
Antidiarrheal AgentsBrand or SeriesApplicationGeneric Drug NameStrengthTypeDosage FormContainer TypeVolume
Antidyskinetics Brand or SeriesApplicationGeneric Drug NameStrengthTypeDosage FormContainer TypeVolume
I want it to look like this:
Antidiarrheal Agents Brand or Series
Antidiarrheal Agents Application
Antidiarrheal Agents Generic Drug Name
Antidiarrheal Agents Strength
Antidiarrheal Agents Type
Antidiarrheal Agents Dosage Form
Antidiarrheal Agents Container Type
Antidiarrheal Agents Volume
Antidyskinetics Brand or Series
Antidyskinetics Application
Antidyskinetics Generic Drug Name
Antidyskinetics Strength
Antidyskinetics Type
Antidyskinetics Dosage Form
Antidyskinetics Container Type
Antidyskinetics Volume
Is there a formula or a suggested way of doing a macro to acheive this?
How To Convert A Block Of Rows To Columns
Jun 19, 2013I want to convert a bloack of rows to columns
1abc2xyz3mnq
4efg5klm6rst
required format
1abc
4efg
2xyz
5klm
3mnq
6rst
Text To Columns And Convert Them To Decimal
Sep 2, 2009I got following Hex data in text format, I need change them to decimal,
0324 00BF 0000 0000 030C 00C6 0000 0000
0305 00C7 0000 0000 02FE 300F 040B 4753
4D4D 5352 4E4D 5343 4E31 0030 0F0A 0101
firstly I did txt to columns, then I found some data changed to scientific format which is not I wanted as I could not convert it using function HEX2DEC.
032400BF00000000030C00C600000000
030500C70000000002FE300F040B4753
4D4D53524E4D53434.00E+3100300F0A0101
if I set column data format to text when I doing Text to Columns operation then all data will be text, so I still can not convert them to decimal.
Convert Data From Columns To Rows
Dec 2, 2009I have a spreadsheet that consists of columns of data and I need to covert it into rows depending on how the data is set up. In column A, there is a list of invoice numbers. Columns B, C, & D are as follows:
Column B: Sales Rep Name
Column C: Sales Rep Number
Column D: Sales Rep % Split
I want to have a single row for each unique invoice number. As an example, I have the following:
Row 1: invoice ABCD-1234 Sales Rep 1: 55%
Row 2: invoice ABCD-1234 Sales Rep 2: 25%
Row 3: invoice ABCD-1234 Sales Rep 3: 20%
I want the output as follows:
Row1: invoice ABCD-1234 Sales Rep 1: 55% - Sales Rep 2: 25% - Sales Rep 3: 20%
I have attached a sample workbook with two sheets; one containing the raw data and the second, which shows the desired output.