Automatically Format Imported Text File
Aug 19, 2007
I need to bring in 2600 student names from a cvs file and have it formatted to an Excel workbook.
When it imports into the Excel file I need it to populate the proper boxes, such as:
StudentLastName
StudentFirstName
StudentID
GradeLevel
TeacherName
TeacherID
RoomNumber
I have the CVS attached. Hope I can get this done. As you can see it shows the teacher's name with their first initial, their teacher number that they are identified by and their room number. I need the student ID as well but not the phone number and the days of the week. This would save a lot of work.
View 9 Replies
ADVERTISEMENT
Mar 25, 2013
I am trying to convert a text imported from CSV file to a number so that I can further elaborate it.
I tried value, trim, clean but without sucess.
Cell values is -10 000,00 what I want to display is 10000.
How can i Do that.
I am attaching a demo file for illustration : Webistexpences.xlsxi
View 6 Replies
View Related
Nov 17, 2009
I have attached two files, one the sample txt file imported to excel but the top area is highlighed with some notes and section break. RED deleted don't need amd un highlighted is actual data. The other file is what I would like to see the data look like after parse.
View 5 Replies
View Related
Mar 24, 2007
I need to clean out unnecessary data from a file, (see attached text file), I'm not sure how to go about this in excel. basically every file starts with 9 cells that needs to be deleted, two cells of real data then one with garbage that needs to be deleted, it goes like that for 40 cells, then again 10 cells of garbage that needs to be deleted, then 40 of real data and goes like that up to 3000 lines, I know it sounds confusing but if you take a look at attached file, at the end I need to have
all cells full of data
View 5 Replies
View Related
Jan 24, 2008
I have a file with four sheets – File1, File2, Association and LookList. File1&2 are totalled, as is Association sheet but then are checked against each other using the totals. What I need to do is the following (but I am not sure how to do it using macro…)
Step 1 - ‘File1’ Sheet – It all comes in text format. Firstly, convert all of column B=>used range (it may vary to 40k records!) into numbers and total each column.
(I know the principal behind it – have a total variable for ColB, loop through and when it finds >0 then increment buy one and output under the last cell in that column – but I do not know the macro code)
Step 2 - ‘File2’ Sheet – Again, it's in text format. Firstly, convert all of column B=>used range into numbers and total each column(would contain same amount of records
as Step1!) .
Step 3 - ‘Association’ – same steps as for File 1 (again – same number of records).
Step 4 - THEN (and I have NO IDEA how to do this!...) I need to check the File1 & File2 against Association using the lookup and return the Serial number and the Association heading that does not match on a fourth sheet.
The problem is that – for example – Field-1 consists total of more than one column – contains 3 but could contain a total of up to 6 columns! - I understand excel formula ‘vlookup’ but am not sure how to do it when it is a combination of columns and even less when applying it to this! – In fact, for a macro I am not even sure what column format the lookup list should be!
View 9 Replies
View Related
Aug 9, 2007
I have dates imported from an external application in the format:
71205
for december 5th 2007, for example
View 9 Replies
View Related
May 1, 2002
I am importing data from my AS400 in Excel, the dates are coming into the spreadsheet as numerics. How do I convert these numbers into a date format? i.e. 3202002 should be 3/20/2002, how do I get the number to that format?
View 9 Replies
View Related
Mar 11, 2008
I'm importing a file into Excel which I need to format into something I can then use to build reports from.
At present the imported file looks like this: ...
View 9 Replies
View Related
Jan 21, 2007
Is there a property that contains the name of an XML file a user has imported into Excel? If not is there any way I can retrieve the name of the file?
View 4 Replies
View Related
Nov 4, 2008
I'm working on a sheet to analyse data in .CSV format, sofar I can import the .CSV file correctly, however I would like the Macro to name the sheet with same name as the .CSV file.
As i'll be importing multiple .CSV files.
The code I have sofar is:
View 2 Replies
View Related
Sep 27, 2013
How can I get from this:
Random Item name;random_nickname Final price: EUR 1.00 (Fixed price)
this:
EUR 1.00
View 1 Replies
View Related
Oct 4, 2013
I've created a spreadsheet which, on running a macro, imports data from a text file, formats it and then sums various parts of it giving me a subset of the large file as a range of data for a chart (a pie chart) on Sheet 2.
The problem begins when I delete the data in the worksheet in preparation for another import - the Pie chart just loses all the data and I have to manually reselect it in the chart each time.
Once deleted the chart is blank, but as soon as the data is imported, I get reference errors when I click on Sheet 2
I must be doing something wrong. You can delete data and repopulate it and the chart should pick up with the new data. If the cells it is referencing are empty, it is blank. Not so here.
Is it to do with importing the data? Or the formula for my chart data?
View 1 Replies
View Related
Sep 5, 2006
I'm trying to create a sub that will save my worksheet to a tab delimited text file anytime there is a change in the worsheet data (all cells are linked to cells in other workbooks). I've figured out the command to save the file
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and SettingsChrisMy DocumentsBook1.txt", FileFormat:=xlText _
, CreateBackup:=False
but I'm not sure how to get a sub routine to start running when the file opens and to have it run continuously while open. I've found the command:
Application.Volatile
that will flag when any cells in my range are recomputed and run a function, but functions don't allow me to save the file.
View 4 Replies
View Related
Oct 21, 2008
I have received a large file of text and numbers arranged (loosely) in columns in a .txt file that I need to get into a usable form in Excel. I'm trying to use the Text Import Wizard but am running into problems geting the column breaks right as there are thousands of rows of data items. As soon I think that I've inserted the break line in the correct place I scroll down a little further to find an item that encroaches into the next column, and when I shift the break line to the right to accommodate this new item I then encroach on the items in this next column.
View 2 Replies
View Related
Apr 9, 2012
I have the following code which is part of a much larger macro which is converting a number so that the the trailing zero in the number 49.50 appears in the formula bar. This is essential as the eventual csv file links to an external printing program which only prints what is sees.
My problem is that this fix works when the file is saved in excel format, but when I save it in CSV format the number reverts to 49.5. How can I convert the original number which appears as 49.5 in the formula bar and is viewed a 00000050 in the file that the sent through. I cannot convert using the text to columns when the file is opened as the other codes in the original file need to maintain the original formatting.
Code:
Sub mc003()
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
[Code]....
View 6 Replies
View Related
Jan 29, 2014
I have a code that import a txt file to an existing sheet, and works perfectly. I also have a ComboBox named "txtstorey" where users select the level they are working on, ie Ground Floor, Forst Floor etc.
I need to add in a VBA code that add the level that is selected in the cells on the same spreadsheet
For example, the current code import the data like this (It places the data at "$C$1"
Living Room20
Kitchen14
Bedroom 112
Bedroom 210
Bedroom 311
Bathrm4
En Suite5
Hallway3
Garage18
This is what I want:
Ground FloorLiving Room20
Ground FloorKitchen14
Ground FloorBedroom 112
Ground FloorBedroom 210
Ground FloorBedroom 311
Ground FloorBathrm4
Ground FloorEn Suite5
Ground FloorHallway3
Ground FloorGarage18
(Where "Ground Floor" is from the txtstorey ComboBox)
Here is my code as is:
[Code] .....
View 4 Replies
View Related
Mar 10, 2008
I have opened a .txt (by right clicking and selecting Open with rather than open from within Excel) file with numbers using the format 1,234,567.00 but in my country we use 1 234 567,00. So I created a macro changing the , into "" and the . into , and it works fine while creating the macro itself (by using the macro recorder) and the numbers shows and behaves like numbers. However, when running the macro on a new file some numbers remain as text whereas others are numbers. Theres is no common string, eg that numbers starting with - (minus) remains text.
It does then not matter if I go to the format function and select number with decimals and thousand dividor - the number still remains as text. I have also tried the suggested multply by 1 but it still remains as text. The only thing that helps is to either double click on the number or use the Konvert text to number. But I would then have to click each number in the whole table which is what I wanted to avoid.
View 7 Replies
View Related
Feb 14, 2014
I have a number of large CSV files with approximately 1.9 million rows, (this is more then excel can bring in). I typically have to import/delimit the files when brining them into excel. However, when I try this I get the message not all data imported. I would like to be able to split the records in the csv file to multiple tabs in the excel woorkbook when doing the import/delimit but do not know how to accomplish this. The delimit of the data varies each time due to the nature of the data so doing a macro is more trouble to create each time. Currently I am having to open the csv file in notepad and split it up into multiple files then import each new file seperately.
View 4 Replies
View Related
Jul 17, 2014
code to convert excel file format into Text.
We are doing this activity on a daily basis to upload into our EPM system , where our system only accepts TXT file.
find enclosed excel input file and output file which should be in TXT format.
View 6 Replies
View Related
Sep 10, 2009
What I have is a double quoted, comma delimited text file that is created from an external application, every now and again we need to open the file to make corrections and this is easier if we open it via Excel using the delimiter options, the problem is when saving the file as a csv it removes the double quotes, however I have found some vba coding that adds the double quotes back, which works great, but it changes the format of the date fields from what the original file had from 09-Aug-2009 to 09/08/2009.
I suspect this may be because the file is opened before the double quotes are added and excel changes the format.
Is there any code I can add that will stop the date format from changing ...
View 12 Replies
View Related
Jun 6, 2007
I am having problems choosing a format for the column in my spreadsheet that contains my account codes. This is especially a problem when the code starts with an '=' sign and is followed by a number or has a '£' sign followed by a number.
I receive the file in a .txt format which I guess if I get it that way I would not have a problem but as I need to work on the file in excel before uploading it I experience problems. For instance when I open the file the codes that begin with '=' + a letter for instance =Y just comes up as '# name?' and only when I click in the cell can I see that it is =Y. Also the code '=1' just comes up as '1' as does '£1' - now this causes problems as for a start I need to do Vlookups on the account code but now instead of three distinct codes I have 3 1's.
The only way that I have discovered how to solve this is to click into each cell and add a ' before the text. (this changes the format to text - right??) But obviously this is very time consuming - is their a quicker way to change these cells. I can't just right click and format cells - text. This does not work?
View 5 Replies
View Related
Jun 28, 2007
I've been doing this excel worksheet for work; even though I've never used excel macros or VBA before.(So if this is an easy question to answer don't laugh at me. :P) (I have worked with other programming languages though.) Anyway, using a VBA manual, I've done pretty well, until now. I'm trying to make a macro that when one clicks on the button it saves the file as a text tab delimited file, but giving it the name of whatever the user put into a specific cell. (And also without closing the excel file too, so they can add more if they have to) So I've gotten it now so that it saves with the correct name, but I am unsure about how to make it save as the text file I want. (At the moment it saves as an unreadable file) Any help would be great thanks.
Here is the ...
View 9 Replies
View Related
Jan 17, 2008
The problem i'm having is that these data downloads come off the server like this:
01/14/08
so i'm getting the green triangle error "text date with 2 digit year"
with the option to covert it to 19xx or 20xx.
I have to manually select this text and select 20xx before it is recognized by excel for what it is. only after this is the conditional format rule processed, and my 5 day old dates turn their appropriate colors.
When i set up a macro record while i do this date conversion, it does not record any command for this conversion.
Is there any code i can enter that will automatically do this conversion process for me without having to do it by hand?
View 5 Replies
View Related
Mar 4, 2014
The attached file "Temp.xlsm" has been provided to me. I need to generate two files from it - 1) csv 2) a text file in a certain format. It should basically look liked the attached file "InFile.txt" which is an input file for a modelling tool. The arrays and struct strings need to be within brackets and it only contains inputs. Outputs don't need to be generated.
With the code in "Temp.xlsm" so far I have been able to generate attached file "Temp.txt". The only missing bit is the formatting of arrays and structures.
Basically for row7 in "temp.xls" , if it is
Xls - In
Struct_Start - (
Array_Start - (
Array_and_Struct_Start - ((
Struct_End - )
Array_End - )
Array_and_Struct_End - ))
and members within these need to be separated by commas.
View 2 Replies
View Related
Jan 12, 2010
I have a large text file that is generated daily and want to import into MS Access as the end result.
First I need to reformat into the row format in excel rather than the format it is in. The issue is not all the segments are the same number of lines or they may have mutli message lines. The names with colon : after them I want to be field names in the table which I wish the text file to import into. Please, I am looking for assistance with this.
I have attached sample data of the text dump, and the name of the file is as you see but different date on the end. At the very end of the text file you will see the desired output which I will then import into Access
Also every new message begins with the dotted line and the date and time at the end.
View 14 Replies
View Related
Jun 29, 2007
What I am looking to do is create a Dos.bat file to be run in the middle of the night that opens Excel. From there I will need Excel to open a .txt file from a specific folder, format the file, then re-save as an .xls file.
Each of the .txt files in the specific folder is named like the following:
BCKLOG_062807
BCKLOG_062707
and a new file is being generated to the folder each night (with the new date in the filename).
Is there a way I can use the macro to loop through only the new files being placed in the folder, since the old files will already have their .xls counterpart saved ???
If this is not a clear enough description, please let me know and I will attempt to explain better.
View 3 Replies
View Related
Apr 10, 2009
I immediately began having problems with formulas and pivot tables when I began importing data from an offsite postgreSQL database. For example, "countif" and "sumproduct" formulas invariably return values of 0. I can create pivot tables from the imported data, but nothing with a numerical value will group.
After fighting with this for literally hours, I finally noticed that all numbers in the columns were on the left side of the column meaning that the numerical data is being imported into Excel as text, even though the columns in the spreadsheet into which the data is imported are in number format.
Any way either to import numbers as numbers from the postgreSQL database, or to convert text to numbers after the data is imported.
View 5 Replies
View Related
Jan 8, 2013
I have imported a jpeg image into Excel but can not figure out how to move it to the "back" so I can add text on top of it. When I make it a "background", it makes duplicate backgrounds when I only want one. Is this the only way and if so, how do I set it so that I only have one image in the workbook?
View 1 Replies
View Related
Oct 18, 2011
I have imported data and it shows "Check 1234". How can I use a formula to remove "check" from this cell?
View 3 Replies
View Related
Mar 15, 2009
I have a text file I am importing and using text-to-colums.
Some of the text is "+TOL" "-TOL" and when excel converts to columns it is forcing the text to a formula "=+Tol" "=-Tol" giving me #NAME? in those cells.
I can format the cells as text, which is fine for now since I'm using VBA, but if I need to use any formulas then I'm SOL...
View 9 Replies
View Related
