I currently have some code that copies a single cell from multiple worksheets. Unfortunately those cells all have a yellow fill and i don't want that fill showing up in my summary sheet. How can i alter this code to copy the cells without the fill.
View 2 RepliesI have been working on a spreadsheet but I use autoformat for.
For example if the date in the cell matches today's date then it turns the text read and makes it bold.
I was wondering if there was a way to format several cells in a row if a certain criteria was met.
for example
A B C
1 Item Cost Quantity
2 Car £11,520 2
3 Bike £7,500 1
4 Tyres £50 4
Now for example if I set a condition whereas the quatity is greater than 3 then it would highlight the whole row.
So in the example above I would like to to highlight row 4 and Fill colour cells A4,B4 & C4 with a yellow background and Red Text and make the texted bold.
I am using the following code to copy all rows that have a cell with a background color to another worksheet. In my first workbook this works just fine. In my new workbook, however; it is not working correctly. There are 111 rows that have a cell with a background color (all the same color). When I run the macro it is only copying the last row that has a colored cell. I have been trying to figure out the reason for the last 3 hours and I give up.
Sub CopyColor2()
Dim rReply As Range, rCell As Range
Dim lCol As Long
Set rReply = Application.InputBox _
(Prompt:="Selct a single cell that has the background color you wish to copy", Type:=8)
when I copy a worksheet from one workbook to another, the colors on the sheet in the destination workbook, become dull/faded. They actually change from the original colors to some off colors. I copy by selecting the source sheet, hold down ctrl key, then drag from one workbook to another). Also, is there a way to get the sheet back to the original colors.
View 2 Replies View RelatedI'm admittedly a novice in VBA but I'm trying to simply settnig the background color of the active cell. I've seen various snippets on the web that reference this via setting the color.index variable, using the RGB codes, etc. but nothing seems to work. I'm sure I'm missing something obvious. I know from tracing thru that the assignment instruction is being executed. I've tried using Selection.blah instead of ActiveCell, etc. also.
Select Case Total_Points
Case Is >= 70
ActiveCell.Interior.ColorIndex = vbGreen 'Green
ActiveCell.Interior.Pattern = 1 'xlSolid
ActiveCell.Interior.PatternColorIndex = -4105 'xlAutomatic
Client_Type = "Elite Partner (" & Round(Total_Points) & ")"
How to make a text background on editable cells and print without text background?
View 4 Replies View RelatedI'm using 3 sheets within one Excel file. 1st sheet (target) is called Offer, the 2nd one (source) is called Stock and there's a 3rd one that only contains a button to which i'll assign the final macro. Now, back to it.
I need to copy from Stock to Offer contents of the entire column (basically there are a few more in Offer, so i need to copy each one and place it in a different part). I need to copy from ROW 2 and paste in ROW 6. The length of the document varies, as it's connected to the database (now i can have 3800 rows, in the next hour 3765). Previously i just added an X to row 4500 ( i don't expect to EVER have more than 4000 lines) and just copied from 2 to 4499
Second issue is, on the Offer sheet i have to fill a column with a certain value. Again, it needs to start from Row 6, and needs to be as long as the adjacent column. To get a better idea, i have for example 3800 price lines, so i need the column next to it to be filled with 3800 rows saying GBP (this will be a fixed value).
Also, none of the codes above should exclude blank cells in the middle of the string. Last thing, seems some of the barcodes i have only have 12 digits, so i'll need to add a 0 in front of all shorter numbers to go up to 13 digits.
[Code] ......
I should be able to figure the rest by recording bits and pieces. The Save part is done already, i'm using
[Code] ....
I needed it in XLSX format, not XLSM so that suits just fine. I might need to add hour and minute as well but i can sort it out (as i said, i can do some stuff on my own but this one got me to the bottom).
Look within sheet "highlowperf" column K and copy the row containing cells that are filled green in column K into sheet "overallperfomers" starting from row 9 within the "overallperformers" sheet until completed. It needs to be from row 9 as i have other data above this which i need to keep intact.
Further to this i do not require all information from the row that is found to contain a green fill. I wish to copy columns A B C D E F G K.
If this second part is not possible I can settle to just copy the whole row over and i will try and work around.
i have some problem in display the highlight cell to another worksheet. Below is in module, i would like to display the highlighter cell to another worksheet.
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 9/2/2006 by user
'
'
Range("I351").Select
ActiveWindow.SmallScroll Down:=-12
Range("I349").Select
ActiveWindow.ScrollRow = 1
Range("E1:E400").Select
how I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View Relatedhow to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
How to color the background cells using text ...
View 6 Replies View RelatedI am using the following formula and getting a #NAME returned
I just need the count of the red background color cells.
Code:
=SUMPRODUCT(--(ExtCell("backgroundcolor",$E$2:$E$13,1)=3))
Where E2:E13 have the values and only the red background (=3) is needed. If the green and yellow background colors where needed what do I set the = to?
I need to set a background as an image, but retain the cells so I can type in them individually (not using text boxes). This template will be used for automatically generated daily reports, so the cells have to be present. How can I retain the rows and cells as they are, but set an image behind them? Note: This isn't the header part of the header and footer, but the top of the document.
View 7 Replies View RelatedMacro is not working .So the macro I am using is supposed to look back at all the months tab, match the Name from previous tabs and if they match change background color of the active sheet's cell to red.
Right now the macro is only able to lookup the name in the previous tab (i.e. For December it will only lookup November tab and not October-January).
e.g. (Candidate name is Jack King and he is in (october's tab, Column A Cell 2 )
I want this candidate name to turn red once I type his name in November/December tab.
I have pasted the code I am using below:
[Code] ......
I have an excel sheet in which many cells have a background color of Green. These cells are located all over the sheet. I want to change the background color from Green to Red not affecting the color of other cells in the sheet.
I will be realy really thankful, as I have to do this exercise for more than 50 worksheets.......If I start doing it manually by selecting each celll with green color background and changing it to red.....you can well imagine my condition.....my life would get shorten significantly while doing this.
I have five possible reps names in column A, when i type in "peter" i want that row up to column I to have a background colour of yellow, each rep must have his own colour. when i clear the name from column A the row should clear the colour. using conditional formating i can only get the first cell to get a background colour.
View 9 Replies View RelatedI need to be able to count the # of green cells in a range independant of what is in the cell. I can't to do it in VBA.
View 5 Replies View RelatedI got an excel sheet were in column A i have listed a few names and in column B I got their respective results (numbers) with a background color.
I want to insert a function in such a way that when their numbers exceed a certain number the background color changes from for example blue to green.
so >1200 = blue background color
1200-1350 = red
< 1350 = green
I, daily get a list of individuals with some data against each one of them. E.g Amit would appear 7 times in the list, John would appear 10 times in the list and so on and so forth. I am required to sort the data as per names and then fill one background color. One color for one person so that it becomes easy to read data specific to an individual.Ia there a way that the color fills up automatically. note the names and number of entries are not same everyday.
View 8 Replies View Relatedcreating a macro. I would like the background color of certain cells under column A (cells 12:25, 27:32, 34:38, 40:45, 47:51, 53:61, 63:70, 72:79, 81:88, 90:92) to change to the color green and display the text "Complete" on mouseclick.
Before the cell is clicked, it would be the color red, with no text. (I'm not sure if you need to know that).
Next, I would need a macro that resets everything back to red. I hope this macro could be assigned to a form button.
I have a spreadsheet with several freeforms. I would like them to change backgroundcolour, if the content in a cell is equal to another cell.
Basically I would like my shape "Freeform1" to change backgroundcolour to RGB (0, 180, 0) if Sheet1.Range ("A1") = Sheet2.Range("D3").
If it's not the same content in both cells, I would like the freeform to remain unchanged, that's RGB (79, 129, 189).
This should happend automaticly, so I don't have to click the shape to make it happen.
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
Excel 2002
I have a simple spreadsheet and am trying to get some Conditional Formatting to work.
Cell1 = Name
Cell2 = 1
Cell3 = 2
Cell4 = 3
If cells 2, 3, and 4 all match I want the background in cell 1 to change to green.
I've tried (Formula Is =B1=C1=D1 green) with no luck.
I'm working on a workbook that will track staffing patterns.
The workbook has three worksheets: Sheet1 "RCS", Sheet2 "HCT' and Sheet3 "Hidden". I've attached the workbook to this thread. The password for the form is "j".
On Sheet3 "Hidden" I have two tables that are set up to collect the SUM of columns on Sheets1 "RCS" and Sheet2 "HCT". I'm finding the SUM of each range by way of the background color. I've set up the following formulas and when the "data collection tables" are in the same worksheets as the original information, the formula's work perfectly:
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] ........
The following functions are pulling data from Sheet1 "RCS" and placing them into a table in Sheet2 "Hidden"
[Code] .......
I have two more functions that aren't working due to the fact that the source values are percentages and NOT plain numbers. The above functions work great for SUM but not for percentages. EXAMPLE--Let's say, 3 sub percentages it gives me the SUM of the 3 percentages (i.e. 85% + 100% + 100% = 285% instead of giving me 95%.
[Code] ........
How might I use the following functions to find the average of the source fields instead of the SUM?
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
1. I want to highlight cells on a form so that a user knows which cells to fill out.
2. When they print the form I do not want the cell shading to print.
how can I automatically fill cells with certain colors based on the value of the cell. (i.e. I want to search an entire workbook and fill cells with values between 80 and 99 green, 60 to 79 yellow and 0 to 59 red.)
View 9 Replies View RelatedI am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.