Copy Of Some Cell Details To Other Sheet
Nov 27, 2008
My worksheet is attached. It asks the name whenever we will open this workbook. The same would be written autometically in open by cell with date & time.Then it ask "whether its new project or not"? If yes then then approved by cell & date-time would be blanks or if no then it will show the last approver's name, date & time. I need whenever anyone approve this in case of NOT NEW Project so the name of the approver & Date & time should be recorded in the another sheet name "record" along with the sr. nos. But the record will be blank whenever we will select "yes" in "whether its a new project". I want to make it password protected & password is "007".
View 14 Replies
ADVERTISEMENT
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
Jun 1, 2012
I have a query on array formula
Am using this formula to get the details from master sheet to template sheet
=IFERROR(INDEX('P O Detail'!$D:$D, SMALL(IF('P O Template'!$C$4='P O Detail'!$B:$B, ROW('P O Detail'!$A:$A)-ROW('P O Detail'!$A$2)+2), ROW(1:1))),"")
with Ctrl+Shift+Enter
This is working fine based on the input cell $C$4
What am looking for is ... how to add two more input data $D$4 & $E$4 so that based on these three values I should get the required output.
View 3 Replies
View Related
Jun 18, 2014
I am trying to transfer information for the 'Master CCO CCB Document List' tab into one of the other tabs ('In Progress' and 'Complete') based off of the status. If the status is Complete, Approved, Declined will transfer to the 'Complete (Approved or Declined)' Tab. If the status says 'On Hold, Pending, 1st & 2nd Session Review needed will transfer to the 'In Progress (On Hold-Pending)' Tab.
I want the master list to house all of the entries, so when the status changes it is just copied to the other sheet and not cut and pasted.
On the 'In Progress' tab, once the status changes to Complete, Approved or Declined I would like for the item to be cut and pasted into the 'Complete' tab,
I'm stumped and really not sure if this will work properly. I've tried everything and now I can''t figure out how to add the contents from the form to the master list tab.
View 1 Replies
View Related
Dec 17, 2009
1. To compare two workbooks with exactly the same columns- Target and Source
2. The target workbook basically has more row items than the source since this is considered the masterlist.
3. The source worksheet's names and contact details are filled out by different sources but will still maintain the same columns.
4. The records of the source workbook must be transferred to the Target workbook reference to its appropriate IDs.
5. The record of source book may be updated and will be fed to the Target book but must not copy the record that is already present in the masterlist.
Below is the code I was working at
Public Sub CopyRecord()
Dim sRng As Range
Dim tRng As Range
Dim sCell As Range
Dim tCell As Range
Dim tLR As Long
Dim sLR As Long
Dim sCount As Long
'Find last row of target sheet
Workbooks(Target).Sheets("Sheet1").Activate
tLR = ActiveSheet.UsedRange.Rows.Count
'Find last row of source sheet
Workbooks(Source).Sheets("Sheet1").Activate
sLR = ActiveSheet.UsedRange.Rows.Count..........
View 14 Replies
View Related
Aug 22, 2014
I create daily report for dispatch documents to our various branches. Now I am looking for formula (or formula is not possible then VBA code) that will auto update document number and dispatch date in "output" sheet.
Find attached sheet with desired output.
View 5 Replies
View Related
Oct 15, 2008
I have a workbook which I use for invoicing customers. Sheet one is the inovice template. Sheet two is the contact details of all my clients (i.e. column headings are Name, Address 1, Address 2, Town/City etc.).
In the invoice sheet I would like to be able to select the name of the client from a dropdown so that it automatically fills in the address into the other cells of the invoice.
View 3 Replies
View Related
Dec 14, 2007
I have in Sheet 1, in column A, the list of employees who are existing, in column B their mobile numbers and in column C the amount of mobile usage for the month June 2007.
In Sheet 2, in Column A, I have the existing list of employees of June 2007, some new employees who have joined, in Column B their mobile nos. and in Column C, amount for July 2007.
Similarly, for August, Sept. Oct. 2007 etc. In each sheet, the old employees are copied and new ones are added alongwith their details. It so happens, some employees leave the organization in between in August, Sept. or Oct. 2007.
Now, I want to extract in column A, the list of all the employees who were existing initially in June 2007, who have joined later on and who have left in between, their corresponding mobile numbers in column B and their amount in column C and show them monthwise in one single sheet side by side. E.g....
View 9 Replies
View Related
Jul 6, 2007
I have a work sheet(sheet1) that contains 700 people's information. Each row contains information for one person. Let's call the first person A. I have to copy certain columns of person A's response to another work sheet(sheet3) in the same file. Then, copy person A's e-mail address and save the sheet as person A's e-mail. Repeat the same steps for the next respondent.
I have created the macro for person A already (including the saving part). Now the question is how to write the loop in the macro.
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 7/5/2007 by Jean Kuo
'
'
Range("Q4").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C[-4]"
Range("Q13").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-9]C[-14]"
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
Sheets("Sheet3").Select
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
ActiveCell.FormulaR1C1 = ""
Range("C4").Select
Selection.Copy
Range("D4").Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C17"
Range("C4").Select
Sheets("Sheet1").Select
Range("T1").Select
Sheets("Sheet3").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-10]C[-13]"
Range("Q15").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-11]C[-12]"
Range("Q16").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-12]C[-11]"
Range("Q17").Select
Sheets("Sheet2").Select
Range("F4").Select
Sheets("Sheet2").Select
Range("G5").Select
Sheets("Sheet3").Select
Range("Q17").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-13]C[-10]"
Range("Q22").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-20]C[42]"
Range("Q22").Select
Selection.Copy ...
View 3 Replies
View Related
Dec 9, 2009
I was interested in getting Excel to look up details of a person say age and put the details in another table under the correct heading.
E.g. Fred Bloggs age 25
Would look like this
First Name Surname 16-24 25 - 49
Fred Bloggs 0 Tick or something
View 9 Replies
View Related
Feb 21, 2014
On the attached spreadsheet, ormula on 'UserForm2'.
When I hit the 'Submit Changes' button I want a formula so that it will look up the product row in Product List (Sheet 1) that is select in the ComboBox1.
Once this row has been found I want the values in TextBox1 to be copy and pasted into Column D of that row and value of TextBox2 to be copy and pasted into Column G of that products row.
View 10 Replies
View Related
Feb 3, 2009
I have seen this on many spreadsheet but never figured out how to do this - click on a cell in a spreadsheet to open up a new spreadsheet?
View 4 Replies
View Related
Nov 16, 2008
I have two sheets, one is named "details" and other is "query". The data in sheet "details" is listed in columns A, B,C, then D is blank and again data is in columns E,F.G. (in text forms)
In the Query Sheet, wish to enter in A1 the value contained in A, B or E, F of "details" sheet, the result of columns C or G may appear in Column B1 of Query sheet and also if value is equal to C or G, the result of A,B, or E,F may appear:
=IF(AI=A1& B1,E1,F1!Details, etc. etc.
View 10 Replies
View Related
Dec 24, 2008
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
View 5 Replies
View Related
Mar 27, 2008
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies
View Related
Mar 31, 2008
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies
View Related
Aug 10, 2008
I have a workbook with a hidden sheet ("Template") and a visible sheet("New Job"). I need code so when cell F1 in "New Job" is populated:
1-the sheet is renamed to the value of F1,
2-a new tab is made (a carbon copy of the hidden sheet "Template")
3-the new tab is named "New Tab" and marked as unhidden.
Public Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.Name = Range("F1").Value
End Sub
Function WorksheetExists(SheetName As String, _
Optional WhichBook As Workbook) As Boolean
Dim WB As Workbook
Set WB = IIf(WhichBook Is Nothing, ThisWorkbook, WhichBook)
On Error Resume Next
WorksheetExists = CBool(Len(WB.Worksheets(SheetName).Name) > 0)
End Function..................
View 2 Replies
View Related
Apr 28, 2014
Problem-1) i want to round off the digit in the same cell i,e. Formula in F12 should be included in D12.
Problem-2) i have entered a sample account.in this i want to post the data entered in day book into their respective sheets of jaya and supervision automatically.
View 1 Replies
View Related
Jun 13, 2014
Ok so i have 2 sheets. Sheet 2 is a form that needs to be printed.sheet one will have data pasted into it by the user. The data will be placed in column a and b. If a has data in it then so will b. Now I need the macro to identify if data is in a then the macro needs to then copy a and paste special into A18 on sheet2 then copy b and paste into A6 on sheet2 then print sheet2. Repeat this process to every row as long as A has data in it.
View 3 Replies
View Related
Jul 9, 2009
I have Worksheet 1, with columns A to E. I would like a row to be copied to Worksheet 2, as soon as cell F in Worksheet 1 is populated. Also the row to be deleted from Worksheet 1.
So, as soon as F1 in worksheet 1 is populated and enter button pressed, row A1:F1 will be copied to the next empty row in worksheet 2, while being deleted from worksheet 1. So eventually all rows in worksheet 1 will be deleted and rows in worksheet 2 will be populated.
View 2 Replies
View Related
Oct 17, 2013
I want to create a loop, that copies the cell B11 from each sheet, and creates a new sheet called "Average". In this sheet I want it to add sheetname in column A, and in column B the value fetched from that sheet..
So ex for the created sheet called Average.
A -------------B
Sheetname AverageValue
sheet1 ---------- 2
sheet2 ---------- 5
sheet3 ---------- 4
View 2 Replies
View Related
Oct 20, 2013
I need to copy the corresponding sheet based on the value in D3 in sheet1 (which it has the sheet name) and copy that sheet and paste it on sheet1 A7.
View 1 Replies
View Related
Sep 17, 2012
The problem is:
I Sheet 1 cell I33 is updated weekly. It would then be great with a macro that could copy from I33 in Sheet 1, into C5 in Sheet 2. But if C5 is filled, it should paste into D5, and so on.
View 5 Replies
View Related
May 31, 2012
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
View 2 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
May 8, 2014
I used this vba code before:
[Code] ......
And it worked perfectly, but now i wanted to use it in an other file but just change the sheets and I keep getting an Error 13.
It should copy the data from sheet insertmeasurements c23 till end of data in the column next to it (is dynamic) and based on cell B1 and the matching category code in column B, put that data in the matching cell in column C to the matching cell (based on the criteria in column B and C) on the sheet storedata.
Attached File : Profitibility Database v1.4.xlsm
View 1 Replies
View Related
Apr 9, 2014
I know how to copy value of the cell to a new sheet a cell, but i want to do this.
Sheet1 column A1:A150 have values, but i need to copy Sheet1!A1 to Sheet2!A1, then Sheet1!A2 to Sheet2!A9, then then Sheet1!A3 to Sheet2!A18, continuing until sheet1!A150 is on sheet 2.
I would like to do it automatically. i dont want to paste in evey 9th cell on sheet 2. =Sheet1!A... 150 times
View 5 Replies
View Related
Jun 8, 2009
I have a workbook that has about 300 different sheets- each the name of a different chapter of a fraternity. I get new lists of members daily and have to manually sort them into the 300 different sheets.
Is there any way I can automate this? For example, if column "E" contained the chapter name- in this case cell E38 contained "Oklahoma Kappa" , the macro would automatically copy row 38 to the first empty row in sheet "Oklahoma Kappa".
View 4 Replies
View Related
Nov 15, 2009
What i want to do with attached example is add a macro to the button which copies each of the rows where there is a value in column C and then paste these rows into the next available row in the 'settled' worksheet.
Once pasted into 'settled' then each o the rows with values in column C of 'unsettled' want deleting.
View 8 Replies
View Related
Aug 22, 2006
I have set up a worksheet(sheet1) that contains 152 rows. Column A contains 152 different book names, Column B contains names of people taht are borrowing the books.
What I wanted to do was create a second sheet that acted as a history document, so that when i put a new name in column b it adds it to sheet2. I can take one cell across and offset it so it populates the next cell down however this is done using a button for only one cell. If i was to add another cell into the code its gonna copy the preexsisting cell.
to make myself a little clearer. say b2 contains the name "bob" by pressing a button it moves to sheet 2 and populates the next clear cell in column b and this only works for sheet1 cell b2. If i added code for say b3 and typed "jan" it will copy "bob" again to the next clear cell in column b as well as "jan" to column C, and i don't want bob to be copied again!
View 6 Replies
View Related
