The Data In Sheet "details" Is Listed In Columns A, B,C, Then
Nov 16, 2008
I have two sheets, one is named "details" and other is "query". The data in sheet "details" is listed in columns A, B,C, then D is blank and again data is in columns E,F.G. (in text forms)
In the Query Sheet, wish to enter in A1 the value contained in A, B or E, F of "details" sheet, the result of columns C or G may appear in Column B1 of Query sheet and also if value is equal to C or G, the result of A,B, or E,F may appear:
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday Dig Drive
Dave 4 5
Bill 2 7
Tuesday Dig Drive
Dave 2 7
Bill 8 1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig Drive
Dave 6 12
Bill 10 8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row Column Value
Bill Dig 2
Bill Dig 8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I have below set of value in Sheet 1 (it has category & Name), whenever I open the Sheet 2 & Sheet 3, unique values should get automatically posted in D column..
Category Names
Pet Animal Dog
Pet Animal Cat
Wild Animal Elephant
[code]....
I have two requirements on this..
1. Unique names should listed in cell D of Sheet 2
2. Unique value of both category & name should listed in Cell D of Sheet 3
I'm in need to split 1 column (address details) into several columns (for ex. address, city, postcode, country) I can't use the "Text to Column" function as some address will split into 5 part, some split into 6/7/8. Is there any way I could do this automatically as there're a lot of entries in my spreadsheet. Example of the data need to be split attached.
I am using a macro to e-mail any work sheet with an address in A1. I would also like to attach a file that will be listed in cell E1 of that worksheet. The file is different for each work sheet that is being sent but will be listed in the same cell of each work sheet.
This is the code I am using (i got it from ron de bruin) when I use the .Attachments.Add (C:est1.txt) it works but i can not seem to figure out how to get it to read the file address in the E1 cell. The code i am trying to use is .Attachments.Add = ws.Range("E1").value.
I am trying to transfer information for the 'Master CCO CCB Document List' tab into one of the other tabs ('In Progress' and 'Complete') based off of the status. If the status is Complete, Approved, Declined will transfer to the 'Complete (Approved or Declined)' Tab. If the status says 'On Hold, Pending, 1st & 2nd Session Review needed will transfer to the 'In Progress (On Hold-Pending)' Tab.
I want the master list to house all of the entries, so when the status changes it is just copied to the other sheet and not cut and pasted.
On the 'In Progress' tab, once the status changes to Complete, Approved or Declined I would like for the item to be cut and pasted into the 'Complete' tab,
I'm stumped and really not sure if this will work properly. I've tried everything and now I can''t figure out how to add the contents from the form to the master list tab.
I create daily report for dispatch documents to our various branches. Now I am looking for formula (or formula is not possible then VBA code) that will auto update document number and dispatch date in "output" sheet.
I have a workbook which I use for invoicing customers. Sheet one is the inovice template. Sheet two is the contact details of all my clients (i.e. column headings are Name, Address 1, Address 2, Town/City etc.).
In the invoice sheet I would like to be able to select the name of the client from a dropdown so that it automatically fills in the address into the other cells of the invoice.
My worksheet is attached. It asks the name whenever we will open this workbook. The same would be written autometically in open by cell with date & time.Then it ask "whether its new project or not"? If yes then then approved by cell & date-time would be blanks or if no then it will show the last approver's name, date & time. I need whenever anyone approve this in case of NOT NEW Project so the name of the approver & Date & time should be recorded in the another sheet name "record" along with the sr. nos. But the record will be blank whenever we will select "yes" in "whether its a new project". I want to make it password protected & password is "007".
I have in Sheet 1, in column A, the list of employees who are existing, in column B their mobile numbers and in column C the amount of mobile usage for the month June 2007.
In Sheet 2, in Column A, I have the existing list of employees of June 2007, some new employees who have joined, in Column B their mobile nos. and in Column C, amount for July 2007.
Similarly, for August, Sept. Oct. 2007 etc. In each sheet, the old employees are copied and new ones are added alongwith their details. It so happens, some employees leave the organization in between in August, Sept. or Oct. 2007.
Now, I want to extract in column A, the list of all the employees who were existing initially in June 2007, who have joined later on and who have left in between, their corresponding mobile numbers in column B and their amount in column C and show them monthwise in one single sheet side by side. E.g....
I have a work sheet(sheet1) that contains 700 people's information. Each row contains information for one person. Let's call the first person A. I have to copy certain columns of person A's response to another work sheet(sheet3) in the same file. Then, copy person A's e-mail address and save the sheet as person A's e-mail. Repeat the same steps for the next respondent.
I have created the macro for person A already (including the saving part). Now the question is how to write the loop in the macro.
Sub Macro1() ' ' Macro1 Macro ' Macro recorded 7/5/2007 by Jean Kuo ' ' Range("Q4").Select ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C[-4]" Range("Q13").Select ActiveCell.FormulaR1C1 = "=Sheet2!R[-9]C[-14]" Range("Q14").Select Sheets("Sheet2").Select Range("D4").Select Sheets("Sheet3").Select Range("Q14").Select Sheets("Sheet2").Select Range("D4").Select ActiveCell.FormulaR1C1 = "" Range("C4").Select Selection.Copy Range("D4").Select ActiveSheet.Paste Application.CutCopyMode = False ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C17" Range("C4").Select Sheets("Sheet1").Select
create a macro that will find and calculate based on the details of 4 columns on the same spreadsheet.
Basically, here is what I need to do:
1. Need to calculate how many QTY IN (Column F) and PALLETS IN (Column I) of a specific PART# (Column A) and LOT CODE (Column B) For example if enter a PART # and LOT CODE, it will calculate how many QTY IN and PALLET IN of that PART # and LOT CODE.
2. Need to do the same for QTY OUT (Column G) and PALLETS OUT (Column J) also.
3. Output should contain the PALLET # , QTY IN and PALLETS IN based on the PART # and LOT CODE search. I just want to simplify the search function in this spreadsheet because it is very cumbersome if you need to find how many items left for that PART # and LOT CODE.
On the attached spreadsheet, ormula on 'UserForm2'.
When I hit the 'Submit Changes' button I want a formula so that it will look up the product row in Product List (Sheet 1) that is select in the ComboBox1.
Once this row has been found I want the values in TextBox1 to be copy and pasted into Column D of that row and value of TextBox2 to be copy and pasted into Column G of that products row.
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A Mr. Jones 3B 3B 3B Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri 1A 1B 2A 2B 3A 3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available") It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
On the attached workbook i have a simple form with text boxes and a enter button and cancel button.
So far, i have only got as far as the cancel button closing the form. I want to know what i have to do to enter each of the fields in to the cells written on the form. Also when i do press the enter button, if any of the fields are not entered then a message box must appear notifying the user all the fields are not entered and then finish by taking them back to the form.
I have an excel file having the month wise model cost breakup e.g.Prod.Qty,CKD,Local etc.My problem is that I want to make a summary in a separate sheet showing the Input i.e. Model Code.If I give that input then automatic summary should be prepare.
Please refer attach file: Costing Table.xlsx
I this file,having 2 sheets.One is details and other is Summary sheet.
focus the cell no.C4 in the summary sheet.When,I give the model code then the summary should be ready from the details sheet data range, month wise.
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
I am trying to copy rows that match a date range but I only want some of the columns to be copied to a pre-defined sheet.
For example, if the row is selected as a match because it is within the desired date range, I want the data in columns 'A-F', 'I-J','N-O' to be copied to the sheet 'Report' starting in 'A3'.
I would like to find the last row in my sheet containing any data in the columns A:O and select the cells in the range of A:O to that last row. I would then like the code to name this selected range as IMPORT.
I have data in two columns on the same sheet that I need to transpose into rows on a separate sheet (same workbook). One problem is that I need to reference off one of these columns (column B - in Sheet "Gp Trg Plan") as the number of lines will vary.
Example - Sheet "Gp Trg Plan" Column B Column D Tower Module 1 Tower Module 2 Tower Module 3 Building Module 1 Building Module 8 Street Module 6
Ideally the row will look like.
Example - Sheet "Status WS"
Column A Column B Column C Column D Column E Column F Column G Gp Name Sub Gp Person 1st Mod Date 2nd Mod Date
There is an undefined amount of training modules (columns D in Sheet "Gp Trg Plan"), but no more than 10.
I've created an excel workbook to automatically create a report for my work. All you have to do is enter the data into the "DATA" worksheet. Easy. Only problem is that someone can easily ruin it if they try to run it when the "DATA" sheet is empty. I figure that if I can get two columns hide when it's empty and that would solve my problem. I've tried several VBA codes, but they don't work. Also, everything except the "DATA" sheet is protected to prevent accidently changes. This is the latest code I've tried:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "DATA!$P$5" And Target.Value = 0 Then ActiveSheet.Unprotect ("password")
How to export data like name and percentage from all the sheet (30 sheets) to a new file or in a different sheet.
E.g
Name project target ,weekly %, and monthly percent% ,present, absent are there in all sheet but i want to export only Name and monthly percentage to different excel or different sheet in same excel.
i'm having a hard time with trying to populate data from a userform to a specific column under a specific sheet. I've attached the file if you want to look at it. The file is basically a exam type with user logging and auto score computing.
The file is made of 6 sheets, 1st sheet is the log-in page where takers are required to enter their ID number and last name. 3 sheets of dummy test items, an Admin sheet that computes the score per test item and Database which I'm trying to compile all data in one column.
What I'm trying to do is that when they enter their ID and Last Name and then answer the 3 tests, they will be recorded in the database sheet in 1 column containg their ID, name and all the test results so that checking,grading and identifying who took the test would be easy.
So far I think I've done the part for the scores but I can't seem to get the userform for emp# and last name to populate on the field marked in the database.
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type Make Model Serial Location
To Be Performed Frequency Last Performed Performed By Next Due Date R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
