Extract Details From All Sheets To One Sheet
Dec 14, 2007
I have in Sheet 1, in column A, the list of employees who are existing, in column B their mobile numbers and in column C the amount of mobile usage for the month June 2007.
In Sheet 2, in Column A, I have the existing list of employees of June 2007, some new employees who have joined, in Column B their mobile nos. and in Column C, amount for July 2007.
Similarly, for August, Sept. Oct. 2007 etc. In each sheet, the old employees are copied and new ones are added alongwith their details. It so happens, some employees leave the organization in between in August, Sept. or Oct. 2007.
Now, I want to extract in column A, the list of all the employees who were existing initially in June 2007, who have joined later on and who have left in between, their corresponding mobile numbers in column B and their amount in column C and show them monthwise in one single sheet side by side. E.g....
View 9 Replies
ADVERTISEMENT
Aug 14, 2014
Creating macro which can read data from one/or more sheet and copy and paste it into another sheet, by matching up column A & B and Row 1, between the both sheets.
I have monthly data stored in each sheet, named as May, June, July etc. I also have sheet called 'monthly' within the same workbook, where I would like to extract all monthly totals, from sheets july, June etc, into the 'Monthly' worksheet by matching up its names from Column A and B and row1 header with each sheet's names.
The june,july worksheets have date1, date2 etc, columns with data and after those columns, there are the 'bs, rm, cm, cd, cl' columns, and these are the columns, I would like to use, to extract the numbers from and paste in the 'monthly' worksheet.
My current issue, is that the 'bs, rm, cm..etc' columns are not fixed, due to the 'date1, date2 etc' columns can vary, for each month.
For this current task, I was using a formula as shown below to extract the values into 'monthly' worksheet, however due to unfixed columns for 'bs, rm, cm... etc', I could not get the formula to work for the 'july' and 'Aug' months (i.e. extract data into 'monthly' worksheet, from the june&aug sheets).
[Code] ......
I would like to request, if it is possible to use the formula below to re-create macro which can carry out this task, by extracting all the values from 'june, july, aug etc' sheet, into the 'monthly' sheet, at once.
I have attached a sample workbook with example of data layout and desired output shown in monthly worksheet.
data_extraction2.xls
View 7 Replies
View Related
Mar 29, 2009
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
View 9 Replies
View Related
Jan 8, 2013
i want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,
No.
Receive Date
PRF No.
Frank No
[Code].....
View 1 Replies
View Related
Nov 30, 2009
I've got one more problem to solve with my current project. An example of the workbook is attached.
What i want to do is change the code on my 'enter button' of the 'input form' which can be shown by clicking the 'Add New Hedge' button on the summary sheet.
The change i want to make is when the user clicks 'enter', if the 'settle now' checkbox is false to add the details of the form to the unsettled hedges form as it currently does.
If the 'settle now' checkbox value is true then i want the form details to be added to the next available row on 'settled hedges' worksheet, in the same way it currently does for adding into the next available row of the 'unsettled hedges' sheet. Also here, i would want the value of the 'returns' textbox added to be added into column L rather than the text "unsettled". This would also mean when the 'settle now' checkbox is true that the 'returns' textbox needs to have a value before adding any details.
View 15 Replies
View Related
Jan 30, 2014
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
View 1 Replies
View Related
Jun 1, 2012
I have a query on array formula
Am using this formula to get the details from master sheet to template sheet
=IFERROR(INDEX('P O Detail'!$D:$D, SMALL(IF('P O Template'!$C$4='P O Detail'!$B:$B, ROW('P O Detail'!$A:$A)-ROW('P O Detail'!$A$2)+2), ROW(1:1))),"")
with Ctrl+Shift+Enter
This is working fine based on the input cell $C$4
What am looking for is ... how to add two more input data $D$4 & $E$4 so that based on these three values I should get the required output.
View 3 Replies
View Related
Jun 18, 2014
I am trying to transfer information for the 'Master CCO CCB Document List' tab into one of the other tabs ('In Progress' and 'Complete') based off of the status. If the status is Complete, Approved, Declined will transfer to the 'Complete (Approved or Declined)' Tab. If the status says 'On Hold, Pending, 1st & 2nd Session Review needed will transfer to the 'In Progress (On Hold-Pending)' Tab.
I want the master list to house all of the entries, so when the status changes it is just copied to the other sheet and not cut and pasted.
On the 'In Progress' tab, once the status changes to Complete, Approved or Declined I would like for the item to be cut and pasted into the 'Complete' tab,
I'm stumped and really not sure if this will work properly. I've tried everything and now I can''t figure out how to add the contents from the form to the master list tab.
View 1 Replies
View Related
Aug 22, 2014
I create daily report for dispatch documents to our various branches. Now I am looking for formula (or formula is not possible then VBA code) that will auto update document number and dispatch date in "output" sheet.
Find attached sheet with desired output.
View 5 Replies
View Related
Oct 15, 2008
I have a workbook which I use for invoicing customers. Sheet one is the inovice template. Sheet two is the contact details of all my clients (i.e. column headings are Name, Address 1, Address 2, Town/City etc.).
In the invoice sheet I would like to be able to select the name of the client from a dropdown so that it automatically fills in the address into the other cells of the invoice.
View 3 Replies
View Related
Nov 27, 2008
My worksheet is attached. It asks the name whenever we will open this workbook. The same would be written autometically in open by cell with date & time.Then it ask "whether its new project or not"? If yes then then approved by cell & date-time would be blanks or if no then it will show the last approver's name, date & time. I need whenever anyone approve this in case of NOT NEW Project so the name of the approver & Date & time should be recorded in the another sheet name "record" along with the sr. nos. But the record will be blank whenever we will select "yes" in "whether its a new project". I want to make it password protected & password is "007".
View 14 Replies
View Related
Jul 6, 2007
I have a work sheet(sheet1) that contains 700 people's information. Each row contains information for one person. Let's call the first person A. I have to copy certain columns of person A's response to another work sheet(sheet3) in the same file. Then, copy person A's e-mail address and save the sheet as person A's e-mail. Repeat the same steps for the next respondent.
I have created the macro for person A already (including the saving part). Now the question is how to write the loop in the macro.
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 7/5/2007 by Jean Kuo
'
'
Range("Q4").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C[-4]"
Range("Q13").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-9]C[-14]"
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
Sheets("Sheet3").Select
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
ActiveCell.FormulaR1C1 = ""
Range("C4").Select
Selection.Copy
Range("D4").Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C17"
Range("C4").Select
Sheets("Sheet1").Select
Range("T1").Select
Sheets("Sheet3").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-10]C[-13]"
Range("Q15").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-11]C[-12]"
Range("Q16").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-12]C[-11]"
Range("Q17").Select
Sheets("Sheet2").Select
Range("F4").Select
Sheets("Sheet2").Select
Range("G5").Select
Sheets("Sheet3").Select
Range("Q17").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-13]C[-10]"
Range("Q22").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-20]C[42]"
Range("Q22").Select
Selection.Copy ...
View 3 Replies
View Related
Dec 9, 2009
I was interested in getting Excel to look up details of a person say age and put the details in another table under the correct heading.
E.g. Fred Bloggs age 25
Would look like this
First Name Surname 16-24 25 - 49
Fred Bloggs 0 Tick or something
View 9 Replies
View Related
Feb 21, 2014
On the attached spreadsheet, ormula on 'UserForm2'.
When I hit the 'Submit Changes' button I want a formula so that it will look up the product row in Product List (Sheet 1) that is select in the ComboBox1.
Once this row has been found I want the values in TextBox1 to be copy and pasted into Column D of that row and value of TextBox2 to be copy and pasted into Column G of that products row.
View 10 Replies
View Related
Nov 16, 2008
I have two sheets, one is named "details" and other is "query". The data in sheet "details" is listed in columns A, B,C, then D is blank and again data is in columns E,F.G. (in text forms)
In the Query Sheet, wish to enter in A1 the value contained in A, B or E, F of "details" sheet, the result of columns C or G may appear in Column B1 of Query sheet and also if value is equal to C or G, the result of A,B, or E,F may appear:
=IF(AI=A1& B1,E1,F1!Details, etc. etc.
View 10 Replies
View Related
Dec 24, 2008
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
View 5 Replies
View Related
Feb 20, 2014
I work for one half of a joint venture & am responsible for planning & expediting. The other half does purchasing. The bi-weekly PO download reports I receive are less than useful. I have already written the code to delete undesired sheets & add, format, and enter headers for a "Summary" sheet.
I need code to move to the next row, and run formulas to pull data from the next sheets, and repeat until there are no more sheets.
The number of sheets will vary from one download to the next, and the sheet names will vary from one download to the next.
Following are example formulas that need to be run on successive rows while pulling from successive sheets.
I am running Excel 2013 on Windows 8.1
View 14 Replies
View Related
Feb 3, 2014
Is it possible to compare two sheets and extract out the differences?
View 2 Replies
View Related
Nov 3, 2013
Extracing unique values based on two lists(2 sheets).
My scenario:
Sheet1 has 2 columns with one million lines. (Master sheet)Sheet1 ColumnA=serial numbersSheet2 has 200,000 lines with same format. columnA= serialsheet2 has some new serials and some existing serials
Serial is 18 digit number saved as text (dunno of that matters)
Solution:
how can I get vba to check serial agaisnt serial ( Sheet2 ColumnA against Sheet1 column A)extract all new serials (unique of sheet 2 only)unique lines to export to new sheet or replace sheet2
View 5 Replies
View Related
Aug 6, 2008
I am running into at the moment is that where the Select Case is checking if the sheet name starts with the initials and project number, it doesn't seem to recognise if it is correct (and therefore perform the actions). I have stepped through the code and when I use the immediate window to manually check:
? ws.Name Like "TA0632*"
I get True as an answer, but the code goes on to the next case as though it is false. Here is the code I have so far, which I'm sure can be trimmed down loads:
Option Explicit
Dim currCell As Range
Dim c As Long
Dim r As Long
Dim rng
Dim ws As Worksheet
Dim skp As String
Dim LastColumn As Integer
Sub Breakdown()
Dim t
t = Timer
For Each ws In ThisWorkbook.Sheets
Debug.Print "Current sheet is " & ws.Name
CheckSheet...................
View 2 Replies
View Related
Jun 9, 2007
provide me a code for extracting data and outputting it into individual worksheets situated within the excel workbook file. I am wondering what the code would be if the data were extracted to individual text files, individual workbooks or *.prn files?
For i = 2 To Cells(Rows.Count, 1).End(xlUp).Row
Set ws = Worksheets.Add(After:=Worksheets(Worksheets.Count))
ws.Name = wsraw.Cells(i, "D")
With ws
.Range("A1") = wsraw.Cells(i, "D")
.Range("A2").Resize(2) = wsraw.Cells(i, "A")
.Range("B2").Resize(2) = wsraw.Cells(i, "B")
.Range("C2") = 0
.Range("C3") = 1000
.Range("A4") = -999
End With
Next
View 2 Replies
View Related
Nov 13, 2012
I wanted to extract the data from the sheets if it match condition.
In the sheet george, data is in the A9: AE500. in the B9:B500, there is date format (mm-yy).
In the H9:AD500, designed as checklist where update as "Y" if or nothing
I wanted to extract the data from this file to sheet Exctract if any of the cell in the H9:H500 not equal to "Y" and B9:B500 of sheet george is less than or equal to D2 of sheet Extract. in the sheet George, some row will be hidden, i wanted to bring the data from hidden rows also.
View 4 Replies
View Related
Jul 24, 2014
i want to compare two excel sheets and extract common data in either sheet. For eg: If sheet 1 and sheet 2 contains some common data, i need to compare or lookup or whatever i do but i need to pull out that common data in sheet 2.
View 3 Replies
View Related
Oct 30, 2006
I am now trying to get the Index worksheet to extract data from the sheets that it has indexed, for example, it returns the sheet name, but i want it also to return the value that is contained in C2 and C3. Is this possible? I have attached the code which i am using below for ease of reference.
Private Sub Worksheet_Activate()
Dim wSheet As Worksheet
Dim l As Long
l = 1
With Me
.Columns(1).ClearContents
.Cells(1, 1) = "INDEX"
.Cells(1, 1).Name = "Index"
End With
For Each wSheet In Worksheets
If wSheet.Name <> Me.Name Then
l = l + 1
With wSheet
.Range("A1").Name = "Start" & wSheet.Index...................................
View 2 Replies
View Related
Jan 25, 2014
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
View 1 Replies
View Related
Feb 22, 2013
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
View 4 Replies
View Related
Dec 26, 2009
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
View 9 Replies
View Related
May 25, 2014
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
View 14 Replies
View Related
Dec 6, 2009
I would like to use a macro to automatically extract the comments in Sheet 1 ( those comments are Customer Names and Their addresses ) to a new Sheet 2 which will print shipping labels.
I have manually created the first three labels on Sheet 2 to show what I want to accomplish. The tricky thing is, that some Customers receive 2 or more artworks...
View 11 Replies
View Related
Aug 1, 2014
I am trying to write a macro which will extract data stored in columns C,E, F, I, J, P, Q, AC from another excel sheet to "Review Data" sheet when the "extract data" button is clicked on the "Review Data" sheet . However, the location and the name of the file should be supplied by user which will be an excel file.
View 1 Replies
View Related
