VBA - Lookup Value Found In A Column Within Another Range And Copy Adjacent Values
Jan 30, 2014
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
View 5 Replies
ADVERTISEMENT
Jan 11, 2010
I have three columns (A to C) with contineous data (# rows always variable).
I would manually type a number in a cell (S2) that would correspond with a number in Column A. What I would like the code to do is that it finds the number in column A and selects the whole range in column B and C starting from that row, and copies that whole selection to N10.
After that all the data in column N should be substracted with a value given in S3 and all data in column O with a value given in S4.
View 9 Replies
View Related
May 28, 2008
I need to create a macro that will loop through a list of names on Sheet 1 / Column A, and if that name is listed on Sheet 2 / Column A, then it will set Sheet 1 Column B (for that one name) to "1".
The problem I've run in to is that both the lists change in length each time I have to run this (so no set range).
I've been able to get this to work with two ( nested) loops, where the first loop goes through the Sheet 1 list and the nested Loop looks for the name on Sheet2, but it is extremely slow.
Is there any simple VBA code or formula that I'm missing that could do this? I've tried to do something with the " Find" VBA command, but I can't see how it would apply to this if the list changes in size.
View 8 Replies
View Related
Mar 28, 2008
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
View 3 Replies
View Related
Jun 11, 2008
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.
View 3 Replies
View Related
Jul 1, 2008
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies
View Related
Jul 30, 2008
Is it possible to write some VBA code that will copy IDs from Sheet1 and then find these IDs in Sheet2 and return the values these IDs have?
View 4 Replies
View Related
May 16, 2012
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB:
Sub Macro0CopyFromCSV()
'Insert a blank row and format it in Master workbook
Rows("3:3").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ......
View 9 Replies
View Related
Jul 14, 2007
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
Dim test1
test1 = TextBox1.Value
Worksheets("data1").Activate
Find_Range(test1, Cells, xlFormulas, xlWhole).Select
TextBox2 = ActiveCell.Value
TextBox3 = ActiveCell.Offset(0, 1).Value
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
View 3 Replies
View Related
Apr 1, 2014
I am trying to use a formula similar to VLOOKUP() to look in a table for two values and if both values are found, return another value.
Sheet2 is an example of my output file, sheet one is a generated file. i would like the vlookup formula in sheet 2 cell D2 and down to be something like this,
=VLOOKUP(A2,Sheet1!A:K,10)
But I would like to lookup A2 and B2, and the row that contains both values, return the value in the J column
View 3 Replies
View Related
Apr 5, 2008
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
View 3 Replies
View Related
Oct 1, 2007
Basically what I am trying to do is use a Lookup formula on a sales invoice where the product name and product price will be automatically entered into the sales form when the product ID is entered. What would the formula be?
Product Information
RegionProduct IDProduct NameProduct Price
Product IDHPPHomeware Pizza Pan19.95
Product NameSPPStone Pizza Pan 29.95
Product PriceHCDHomeware Casserole Dish19.95
Units SoldHCPHomeware Cookie Pan 9.95
Total SaleCWChina Wok 19.95
HEWHomeware Electric Wok29.95
WCMWilson Coffee Machine29.95
HBMHomeware Bread Machine49.95
HBMDHomeware Bread Machine -Deluxe89.95
HRHomeware Rotisserie119.95
OGGOlson Gas Grill 159.95
OEGOlson Electric Grill 159.95
View 2 Replies
View Related
Jun 13, 2013
I'm using a formula to lookup names within text and return that name to a separate column if it's found.
The formula is =INDEX($E$1024:$E$1026,MATCH(FALSE,ISERROR(FIND($E$1024:$E$1026,E1010)),0))
I understand index and match functions, but I'm confused regarding the use of FALSE as the lookup value and the iserror(find( usage.
View 2 Replies
View Related
Dec 20, 2013
Formula(s) to do as explained in the attached example.
Example_formula.xlsx
View 9 Replies
View Related
May 20, 2008
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
View 5 Replies
View Related
Oct 30, 2008
I have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
View 2 Replies
View Related
Oct 11, 2012
I have the following code with uses a cell color to count the number of cells in a range with the same cell color:
Function CountColor (rng As Range, color as Range) As Long
Dim c as Range
Application.Volatile
For Each c In rng
If c.Interior.ColorIndex=color.Interior.ColorIndex Then
CountColor = CountColor +1
End If
Next
End Function
What I would like is instead of just counting and returning the number of cells of the same color, is for the code to return the sum of the values in the cells of the same colors. Cells being evaluated contain numbers from 1 to 300.
View 2 Replies
View Related
Sep 13, 2007
I have two worksheets. Worksheet One and Worksheet Two. In Worksheet One Column A is a list of numbers. I want to look for all of those numbers in Worksheet 2 Column A. Any of the numbers in Worksheet One Column A that are not found in Workseeht 2 Column A I want to list in Worksheet One Column B. I do not want to compare cell to cell but if any number in the first column is found in any position in the second column.
View 3 Replies
View Related
Aug 3, 2009
I found a macro that searches a column on each worksheet and copies the searched for value to another worksheet but. I would like to modify this to copy the searched for value and the next 10 cells in the row but I am not able to figure out how to accomplish this. I highlighted in red the piece I would like to modify.
For Each sh In ActiveWorkbook.Worksheets
With sh.range("c10:c10000") 'this determines where to search
For I = LBound(MyArr) To UBound(MyArr)
'If you use LookIn:=xlValues it will also work with a
'formula cell that evaluates to "@"
'Note : I use xlPart in this example and not xlWhole
Set Rng = .Find(What:=MyArr(I), _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
If Not Rng Is Nothing Then
FirstAddress = Rng.Address
Do
Rng.Copy NewSh.range("d1000000").End(xlUp).Offset(1,0)
Set Rng = .FindNext(Rng)
Loop While Not Rng Is Nothing And Rng.Address FirstAddress
End If
Next I
End With
Next sh
View 9 Replies
View Related
Dec 5, 2009
i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
View 11 Replies
View Related
Apr 10, 2014
I need to sum values in a column, but only if the text in the same row of the adjacent column meets certain criteria. Below is a simplified version as an example:
A1 - Apple
A2 - Banana
A3 - Apple
A4 - Banana
B1 - 3
B2 - 2
B3 - 1
B4 - 1
I need a formula that will add up the cells in column B that have "Apple" next to them in column A. Apple would total up to 4 and Banana would total up to 3.
View 1 Replies
View Related
Nov 3, 2006
i'm having trouble with some of the codes...
i'm suppose to create a code that searches a specific phrase/word in a row, then from that row, i want to mark the entire column, so that i can copy it and paste it in a new sheet
eg. find 'NE_KENNUNG', once it's found, mark the whole column "C"(the column may vary), copy the whole column, paste on to a new sheet
here's what i've written so far..
-------------------------------------------------------------
Private Sub CommandButton1_Click()
Search ("NE_KENNUNG")
End Sub
Sub Search(strSrch As String)
Dim xFind
MsgBox "in Suchfunktion !"
If strSrch = "" Then Exit Sub
View 7 Replies
View Related
Sep 18, 2012
I have following code (see below) which finds the duplicates within columns, but I require copying and replacing duplicate values within different row cells, as I am currently finding this task hard to implement.
Input Data example:
Name
Short_code
Lng_code
[Code]....
View 9 Replies
View Related
Mar 24, 2008
I have another little VBA macro problem that appears to be beyond my coding knowledge.
I have attached a small excel spreadsheet, with a macro recorded (CTRL-P) of what I'm trying to accomplish. Basically, If the data in column A matches a single entry in column F, I need to copy and insert the row (columns F-L) that matches.
View 4 Replies
View Related
Apr 7, 2014
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
View 3 Replies
View Related
Nov 28, 2012
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
View 3 Replies
View Related
May 15, 2007
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
View 9 Replies
View Related
Jun 5, 2013
I need to remove values from column A that are present in column C without modifying the order in column B. To be more explicit below is an example:
Column A---------Column B-------Column C
5230400----------81,50----------1660000
3275500----------78,00----------6245700
2856300----------47,50----------5230400
1879800----------62,50----------2497900
2124300----------99,00----------1879800
2497900----------65,00
4826900----------77,50
2124200----------34,00
6245700----------61,50
3324400----------86,00
1660000----------53,00
Column A represents 600 materials.
Column B represents 600 prices. (different for each material)
Column C represents 107 materials that are present in column A and have to be removed along with their prices in column B.
Now i want to remove the materials that are in column A and C along with their prices, so i won't damage the order in the file.Meaning if i delete a row in A and shift the other materials up or down, and in the same time column B remains unchanged, the remaining materials will have different prices...and that's not good.
View 4 Replies
View Related
Aug 28, 2007
I need a VBA script that can display a search box on multiple sheets within the same workbook similar to using ctrl + F and search values in column B only. If there is text or the row happens to be empty then it should skip that and only search numbers. Also the numbers in column B range from 50000 to 89000 and if there is a wrong number entered then I want to have a pop up box saying Error: invalid value or something like that.
Sub search_box()
Range("B49000").Select
Cells.Find(What:="some#", After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Cells.FindNext(After:=ActiveCell).Activate
End Sub
View 8 Replies
View Related
Apr 17, 2009
Split from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
View 5 Replies
View Related
