I need to be able to paste information into excel and then get excel to read the characters to 50 and then move the other info to another line and do the same command again until it has read all the data and put it in lines of 50.
View 9 Replies
I'm trying to use conditional formatting to highlight cells in a column that have less than 8 characters.
I know the LAN function, but I don't know how to make it work for the conditional formatting.
I have 62,000 lines - and some of the cells contain 4 numbers, and some of the cells contain a sequence with two letters followed by 8 numbers
I want to count how many cells have the sequence of two letters and 8 numbers.
Everything Ive read so far has led me to using the LEN function, but that doesn't seem to be working too well for me.
Example: In D5 if I have AB00011111
Basically =LEN(D5) will tell me there is 10 characters in the cell - How do I get it to count the cells with only 10 characters and post the number of cells with 10 characters in column E1 for me.
I work for a localizer of text heavy software. Our developers normally use a converter to pull text out of a file and insert it into the program. This text is normally input into an Excel file since it has to correspond with files/locations in the program.
Since the space on the screen of the program is limited, we often face character limits when inputting text into Excel. Now, one cell might hold up to 255 characters, and I could restrict that with data validation, but within one cell I need to restrict each line (with a hard return) to 30 characters to fit on the screen.
So for example I have a row of cells that look like: ....
In one of my columns I need to count the characters (alpha/numeric AND blank spaces) in each cell. (Any that are over 300, I will need to manually reduce to under 300.) How can I do this? Basically I would simply like to know which cells exceed 300 characters.
View 9 Replies View RelatedI'm making a register and need to count the attendences (marked on the register as 1) and the number of authorised abcenses (marked on the register as AA).
I'm using the SUM function to count the attendences but wondered if they was a formula that would allow me to just count the AAs from the list.
We are in the middle of a system conversion and I need to make sure our data is not over the length of the maximum character count for certain fields in the new system. Is there any function in Excel that counts the # of characters in a cell or will highlight the cells that contain larger than a certain # of characters?
View 2 Replies View RelatedCells in the range of BG8:BP8 either have a "W" or an "L" in them. I want to have cell BO9 display the total number of Ws and cell BP9 to display the total number of Ls.
View 3 Replies View Relatedhow many times a charachter appears in a cell?
View 9 Replies View RelatedI need a formula to insert a line break after every 42 characters in a cell , example if there is 266 characters in a cell there should be 6(266/42)line breaks.
=REPLACE(REPLACE(A1,42,0,CHAR(10)),84,0,CHAR(10))
I tried this but i am not sure how to get the start num to change to 126,168 and so on
I am using Excel to create a parts list for a manufacturing assembly. I intend to have 6 categories (columns) for each part or instance. My problem is that the last (furthest right) entry will sometimes contain more characters than others. I want to limit the number of characters in the cells of this last column, and I have seen how to bump the remaining characters down to the next row(s) in the same column using the LEFT and MID formulas. This actually works very well for that purpose. However, I need to know how to force the next instance (row of 6 cell) to start together on the next available row.
The following images should better illustrate my question. First, I show the source data with the contents of cell F2 without further formatting. This cell contains more characters than I want making the column too wide for the printable space allowed. http://www.ozgrid.com/forum/attachme...1&d=1198374241
The next image shows the desired result with the extra characters from cell F2 moved to F3. (This data could actually fill up to 4 or 5 cells vertically.) Here, I have manually entered cells A4 through F5 for this illustration. I need to know how to automatically have A, B, C, D, & E move along with F. http://www.ozgrid.com/forum/attachme...1&d=1198374241
I have a cell in excel that has 5 lines of text and I would like to count how many characters there are in each line of the cell. Is there a formula/macro to count them?
View 2 Replies View RelatedIs there an easy way of counting odd or even numbers in a row? I can't figure it out on countif, isodd, odd, count etc.
View 2 Replies View RelatedThis should be simple, but I am struggling with finding a way to use the search or find function to identify text characters. This is my situation, I have for example a cell that contains FW023 or D1234. I need to be able to count the number of characters that are text.
i would think I would be able to do it with the search or find function, but can't figure out how to get it to just count the number of text characters with in it.
Trying to figure out the width of a single line of printed characters for Landscape v. Portrait (obviously the margins would change this).
View 3 Replies View RelatedI'm dealing with an Excel file with many cells and line-breaks. I'd like to have a count next to each cell with the total line-breaks in it.
Example:
A1_trial_____3
___trial
___trial
B1_trial_____1
C1_trial_____2
___trial
Do you know which formula I should put in the cell for counting the line-breaks?
I have a spreadsheet, a small section attached. There are near 20000 rows at present. I need to count the number of characters in B1 excluding any hyphen in b1. If a hyphen occurs in b on its own,the count is zero.If b cell is blank,i need a count of all characters in A.I need a formula I can autofill down.The count column is c and I have completed it manually to show what I mean.
View 9 Replies View RelatedI have a exel file which has been exported from Access to exel. There are many cells which shows the data as in Cell A1 with the Linefeed character in between data in a cell. Is there any way (may be using a macro) where I can remove the character and get it to display as B1 in the same cell(A1). The file is attached herewith.
View 5 Replies View RelatedI am trying to recreate the screen grab that I have copied and pasted in (purple bar chart). I am to create the bar chart, but I am unsure how to create the dotted line which is the national average.
View 3 Replies View RelatedI would like to insert a line if a cell contains something. I get it to work in a macro with this:
Code:
Sub insert()
If ActiveCell.Value = "*" Then
ActiveCell.Offset(1).EntireRow.insert
End If
End Sub
But if i want it to do this in sheet change it doing nothing
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If ActiveCell.Value = "*" Then
ActiveCell.Offset(1).EntireRow.insert
End If
End Sub
I need to add spaces to a string of characters so that it is readable, the database is huge so I cannot do it manually:
For example,
123456John Doe 3456Adam Sharp I need it to apperar as:
123456 John Doe 3456 Adam Sharp
but still remains at the same column. Is there a quick way to do this ?
i have a macro that copies info from cell in row A and uses that info to name the whole row, now if the name has a space between the words it uses _ (underscore) substition so i don't get an error (when row name is defined - you can't use any special characters or spaces) i was wondering if anyone can help me to add "-" besides the space
here is the macro
Sub Macro1()
Dim a As Long
For a = 1 To Cells(Rows.Count, 1).End(xlUp).Row
Cells(a, 100) = Application.WorksheetFunction.Substitute(Cells(a, 1), " ", "_")
ActiveWorkbook.Names.Add Name:=Cells(a, 100), RefersToR1C1:="=Sheet1!R" & a
Next a
End Sub
I have some data in Cell A1 and B1, I want that data in combined in one cell but in diffetent lines.. For example if i have 123 in A1 and 456 in B1, I need it to show the result as below in C2
123
456
I use the Subtotal function to sum several columns during the subtotal function. I dont think I can run a subtotal doing the sums and counts. Is there any way to add the number 0f rows in each subtotal? Count? I'm not sure how to go to each blank row (subtotal line) and count/add the number 0f rows in that subtotal?
View 4 Replies View RelatedI need to add extra text line in textbox by Toggle Button or checkbox. The problem my extra line every time I select it makes extra lines
View 5 Replies View RelatedThe attached file receives information from another program in cells A2:D2. It then carries out a copy/pastespecial, and then does a copy insert. The script is supposed to update when new data enters the cell, however it keep adding an additional null line. Does anyone know why this is or how to fix it?
View 2 Replies View RelatedI'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?
If Range("I3") Temp Then Range("I1") = Temp
I'm working with a column that contains dates. The dates are pulled from a system that doesnt always have dates in the format
mm/dd/yyyy => 09/26/2014
but instead sometimes
9/26/2014
or
4/7/2014
i.e., 0's are missing.
I'm looking for a macro that inserts these missing 0's
**So I suppose the criteria should be that if the cell is 9 characters long (including the "/"s), then it adds a 0 as first character**
and
***the cells that are only 8 characters, in that case there would have to be insert 0 again as character 1, and 0 as character 4 (if 0 is already added as first)***
I'll attach a file that contains dates : test.xls
My group is putting "marks" in Excel (2007) work papers & sometimes they may want to add additional marks to those previously added in a selected cell. What I have below actually works, but I just got my VBA book last week & there has to be a better way.
Specifically, I've saved the "target" off in the same worksheet (That can't be good.) and delete it when I'm done writing it back. Can I save the original characters virtually, or to the personal.xlsb.
Code:
Sub addMarkInCELL()
'
Dim charCount As Integer
Dim charStart As Integer
Dim rngTarget As String
charCount = ActiveCell.Characters.Count
[Code] ..........
I am currently using cell references to create a depedendent list with data validation. How to make cell references show up with some invalid characters?
For example, one of my cell references is Youngs_Market_Company. However, when pulling up the cell, I want it to be displayed as Young's Market Company.
