I have a list of salesmen and their performance to date (on a percentage basis) which is sorted lowest percentage down to highest. What I would like to do is to graph this as a bar graph (no problem there) but for the bars to be replaced by the names themselves! So, I have data like this:........
View 3 RepliesI created a bar chart with horizontal (category) labels: winter, spring, summer, fall. Y-axis label is percent. For each category there is data for blk rats, Norway rats, Mice. For each species and category the standard error is different because it is based on several years of data for a given season.
When I try to display the std. error (using custom, fixed value) it treats each species as a series and only lets me choose one value. in other words the std. error would be the same for blk rats in winter, spring, etc. How can I use the individual values?
I am using defined names to build a chart. This is working fine, but I also would like to use a defined name to control the +/- fields for the error bars. The defined names I have set up are correct, and I am able to enter them into the sorce data form but Excel does not display them.
View 9 Replies View RelatedI have created an excel file that contains a lot of worksheets which contain a lot of raw data and charts. There are 5 different tabs for 5 different companies. Each tab currently contains only 1 year of raw data for that company. Then I have another excel worksheet that has nothing but charts on it. Each chart is a bar chart that shows each of the 5 companies. It also shows the current rate for the month for each company and the 12 month average for each company. On the chart there are also 3 lines. There is a standard line that we try to meet each month. There is also a line for the upper control limit and a line for the lower control limit. Here is my problem:
The 2 bar charts (current rate for the month & the 12 month average) are created and updated by the raw data in each of the 5 data sheets.
Based upon the values in each of the cells that create and update the bars on the charts themselves:
I want the bars to be RED if the values are below the lower control limit.
And I want the bars to be GOLD if the values are above the upper control limit.
And I want the bars to be green if the values are in between the upper and lower control limits.
I've just started with VBA coding and I'm absolutely stuck with one problem I have had for weeks!
I litterally spent days looking for an answer on google, unsuccessfully of course. So here I am
Right, so the problem is the following:
I have series of bar charts (up to 10) with some relationships between them, and I want to highlight those.
Here is a screenshot:
or here: View image: Untitled
I know how to move the shapes automatically, etc. Yet, the big issue I'm encountering is that I can't find a way to get the position of the circled points!
I tried every possible way with GET.CHART.ITEM but the best I get is the top of the bar and not the points inside of it...
Using Excel 2007. Is there a straightforward way to do a waterfall chart?
eg. stacked bars running from left to right.
First Column = 2011 Headcount
2nd Column = stacked bar with additions (by category) - stepping up from the 2011 total.
3rd Column = stacked bar with reductions (by category) - steppind down from the first column + 2nd colum total.
4th column = 2011 exit (which will be at the same height as the bottom of the 3rd column).
In the attached document is a timeline made from a scatter chart. Error bars using custom values are used to show the length of each task, however I can't get the chart to include error bars for the last 2 data points (tasks).
View 1 Replies View Related1. In column A, I have models, in column B, I want to place either a "printer" if the model begins with Phaser or Laser, and if it begins with WorkCentre make it MFD. Also, if the Phaser has MFP on the end, make this an "MFD" and If Color 560 or Docucolor, make this "Out of Scope". How do I read the first part of the string in column A to do this, or do I need to make a second column with this Phaser and WorkCentre broken out?
I have this code attached, but only works if I have the word Phaser or WorkCentre.
I've just switched to 2007 and can't seem to find where they've moved the ability to change the width of bars in a chart. Where is it in 2007?
View 7 Replies View RelatedI was wondering how do you create a horizontal bar chart where the allocations within the bars change as the percentages change.
For example, if I have school stats where the there are 30 students in each class from grades 1 to 5 broken down between girls and boys
how can I get the bars for EACH grade to reflect the allocation between boys/girls?
In the code below using msoBarTop places the menubar at the top but it seems to just place it in a new row at the right of all menus.
How or can I dock the menubar next to the last menubar?
Basically, I have a table of data in Excel 2010, akin to the demonstration below (just much, much, MUCH bigger).
Category
Genre
Title
Author
Year
[Code]....
I am trying to derive the EMI for a Loan Amount and also chart a PIE graph for the same..
Instead of Manually feeding the values such as :
Variable 1 : Loan Amount : Min : Rs 50,000/- Max :Rs 5000000/-
Each Spin (1 Unit) -Rs 25000/-
Variable 2 : Interest Rate : Min : 5% Max : 30%
Each Spin (1 Unit) -0.25%
Variable 3 : Tenure/Duration : Min : 6 months Max : 30 years
Each Spin (1 Unit) - 6 months
I want to have a Scroll-Bar where the values can change Automatically but am not aware of using the same...
Can someone please help me with a small attachment with the above variables attached to it..The values drawn should be displayed as well above the Scroll-Bar and maybe can make the Min and Max more dynamic by storing it somewhere in the Sheet..
I am looking for Non-VBA solution to do the same..
In the menu via TOOLS-->OPTIONS-->VIEW I am trying to remove the scroll bars from just one worksheet but when unticked, this option affects all of the worksheets in my workbook. Is there a way to just nail this selection down to one sheet via properties?
View 2 Replies View RelatedI'm working on a charting application that uses Office charts. I'm wondering what are some of the main reasons people change the base unit from the default, and how common that is.
Some reasons I've identified on my own:You're comparing different monthly metrics, but they could be recorded on different days of the month.Get a zoomed-out view.Compare the max value of each month.
Is it possible to make a copy of a chart that is edited simultaneously as when you edit the original chart...somewhere else in the same workbook.
View 1 Replies View RelatedThere is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
I have a chart where half the users want a black backgroud and half want a gray background. Is there a way I can change the chart colors based on a textbox value? I would have the user choose a value (say, "Dark Background or Light Background") and then, upon commencing the macro it changes the chart.
View 4 Replies View RelatedI've been using a VBA code to look through my spreadsheet and find any graphs in any tab and move it to powerpoint. I have about 70 tabs with 7 graphs each.
I have is that the order of the graphs in the slidepack isn't in the same as found on each excel tab.I also tried renaming them (chart1-chart7) but problem still remains.
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I am trying to put some charts into a report that is pivot table based. I have some code that will work if the pivot tables stay stagnic but the users may change the tables around so that could be an issue of new data. I have the following code where I changed the source to the pivot table name (general name because of numberous report possibilites). I have taken out the other charts because they are just a variation of the chart 1. I am crashing on the line with the * on it.
Sub UWTierChart()
Dim oCell As Range
Dim oChart As Chart
Set ws_data = ActiveSheet
'Chart 1
Sheets(wsPT).Select
Range("B21").Select
[code]....
I have a bar chart which compares two columns of data. the data in one column is fixed to 100. the data in the other column varies. a third column states whether each entry is "A" or "M". Is there a way to include the A or M on the bar chart? Perhaps by having a set colour whether the data is A or M?
View 1 Replies View RelatedWhat I need to do is add a scroll bar to my text box in my form. I used the properties of the text box to add a scroll bar but when you preview it you can't see it. When you click somewhere inside the form it appears and is workable but not when it hasn't been clicked on. How do I make the scroll bar appear from the start. this is a vertical one ad is on a text box within the form
View 11 Replies View RelatedFYI This is cross posted on the VB Forums at [URL].....
I know that you can use the below code to add buttons to 2 of Excel's menu systems,
Code:
Application.CommandBars("Worksheet Menu Bar").Controls.Add
Application.CommandBars("Cell").Controls.Add
And this should add a command bar control of whatever type specified to either the Add-Ins tab of the ribbon or the right-click menu when clicking on a range of cells.
However, I would like to be able to add some command bar controls to the right-click menu when you click on a group of columns. Is this possible?
The graph function in Excel is driving me insane! Is it possible to do as image below shows? If so, how?
As you can see, I dont want to stack the result, but rather compare two bars with the bigger one in the background.
code to remove the titlebar of a userform in Excel/VBA.
Remove meaning the program user must not beable 2 see the titlebars..
I have some code that creates multiple new menu bars for a user which each have there own controls. I need to know which control is selected by the user for onaction. The example below is where there are up to 20 new menu bars with names Tract 1, Tract 2, etc. For each Tract, there is a controlbutton titled Absoprtion and I need to know which "Absoprtion" button was selected to run the "ViewAbsorption". I need to use th For next function because the number of menu bars could vary.
Dim objMenu As Object
Dim objViewMenu As Object
For y = x To 39
Name = "Tract" & y - 19
With Application.CommandBars("Worksheet Menu Bar").Controls
Set objMenu = .Add(Type:=msoControlPopup, temporary:=True)
objMenu.Caption = "&" & Name
End With
With Application.CommandBars("Worksheet Menu Bar").Controls(Name).Controls
Set objMenu = .Add(Type:=msoControlButton, temporary:=True)
objMenu.Caption = "&Absorption Schedule"
objMenu.OnAction = "ViewAbsorption"
Next Y
I have opened an Excel file (map1.xls) and changed some little things in that file.
after that I open a new Excel file with some VBA code in it.
In ThisWorkbook I have this ...
Each quarter should have the bars standing next to each other, i.e. Q1 2013 should stand right beside Q1 2012. Between these pairs of quarter there should be a small space and the the next pair, Q2 2013 and Q2 2012, should be. So how do I do this?
When I use data without stacking several info in the same bar, this isnt a problem but when I have this "aaa, bbb,ccc,ddd" in every bar, this gets messed up.
This is the data:
jan09 feb09 mar09 .....
Division 1
Division 2
Division 3
Division 4
Division 5
jan08 feb08 mar08 .....
Division 1
Division 2
Division 3
Division 4
Division 5
The graph would be a bar graph with 2 bars next to each other per month. each bar would be stacked by division. The goal is to compare for example sales in 08 with sales in 09 showing 2 bars next to each other split by division.