I'm working this spreadsheet and i want to automate of deleting the entire rows once the last two columns contains both Zero values. the worksheet cotains thousands of row to clean-up.
View 3 RepliesI have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies View RelatedI want a macro to delete the entire row based on the value in Column Q ....
View 14 Replies View RelatedWhat I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies View RelatedIs it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
View 12 Replies View RelatedI want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"
View 9 Replies View Relatedhow to delete duplicate rows except the first and the last rows using macro..
I have data like this and i want to delete those rows except the first and the last rows
31/10/2006
31/10/2006
31/10/2006
31/10/2006
I use the below macros from btadams posted 27th January 2003 but only for delete the last row
Sub DleteDups()
Dim Cell As Range
Do While ActiveCell.Offset(1, 0) <> ""
If ActiveCell.Value <> ActiveCell.Offset(1, 0).Value Then
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.EntireRow.Delete
End If
Loop
End Sub
complete this coding?
Sub DeleteBlankRowInColumnA()
'this macro scrolls down Column A if the cell is empty the row is deleted.
Dim A As Integer
A = 0
Do Until A = 142
If Range(0, "a1") = 0 Then
Selection.Delete shift:=xlUp
End If
Loop
End Sub
I have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project.
Row 2 is blank
Row 3 is blank
Row 4 is blank
Row 5, A5, contains the word Organization.
Row 6 is blank
Row 7, A7, contains a 6-digit number starting with 3.
Row 8 is blank
(all of the above starts over again (loops) approximately 30 times)
The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet.
I am aiming for:
Project
301111
Project
301112
Project
301110
(Repeat until finished)
Grand Total:
Here is the problem: i have two conditions to satisfy first is data from column A and second is data from column C, what i wanted to do is if both data from column A and B has the same other data in column A and C then sum the total in column D, F, I retain data for column B, E, G and H. Then delete the duplicate rows. By the way we also need to replace the remove the text (W1,W2,W3,W4 and W5) in column C.
View 6 Replies View RelatedHow do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A
sku
3102-0400-100000
3102-0400-200000
3102-0500-100000
3102-0500-200000
3102-0600-100000
3102-0600-200000
3102-0700-100000
3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I have a worksheet with part numbers, and I want to delete all the rows with part numbers matching a part number in another workbook (I could import the list into the part number workbook in a new sheet if it makes it easier). The part numbers in the other worksheet would be in column A.
View 5 Replies View RelatedI would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
Having book1 and book2 (that is closed). Is there a way that if I erase a value "X" in book 1, update book2 (without open it) deleting the complete row/rows where the value X is found?
View 4 Replies View RelatedMy worksheet has a report name in cell A1, a brand name in B2, price name in C2, and color in D2. Row 3 has a table header in cell range A3:E3 followed by rows of table contents at the end of which is a row of empty cells. This sequence repeats itself for a new product: a row with the report name in column A, followed by a row with a new brand name, price and color in the same columns as before followed by the same table header and table contents. The number of products (with the previously mentioned details and table) vary so I would like to write a macro that is not dependent on a set number of products. Each table varies in the number of rows but never contains empty cells and always ends with a row of empty cells. I want to delete all rows with the report name and have all products in one table with the brand, price and color added to the table header and contents.
View 2 Replies View RelatedIn a worksheet I have a list starting Col A being the running reference no. such as Action 1, Action 2 and so on. Each time a new action is needed the numbering increased by 1. The next column is the description of the action. This list start at row 39 of this worksheet.
This is a protected worksheet and entry of data is limited to specify cell in the list.
1. Look for the last Action Item.
2. Check if the description column (Col B) is blank.
3. If Col B is blank delete the whole row.
Suppose I have a excel sheet,in this sheet has 7 columns(A to G).I need to do with my sheet with this condition.
-Keep the rows that have the same value of datas in column A,C,G and they must have different datas in column E and F.
-The other row that not same as above condition must be deleted.
I want to delete a row in excel based on a condition.
The condition is as follows:
I have few rows in the excel where the columns 7,12,13,23 are same and column 24 in one row has some number and in some other row the column 24 is blank with orange color filled(the colorindex for orange is 44).
In this case I want the row with orange color filled in column 24 to be deleted.
I'm working on Outlook 2003 and Word 2000 which are not compatible. I have an
Excel Sheet which are my contacts from Outlook and I want to re-work it to
have only a certain category left.
I need a macro that does
- search a certain column
- deletes the row if it does NOT find a certain condition
Ideal would be a little pop up window to enter which category I want left.
How to delete cell with some condition?
View 1 Replies View RelatedI have some data in numaric form from range a2:f20000 which I have got as a sum from a sheet and I want if any cell (a to f) from row 2 to 20000 has sum up value blank or 0 then it deletes shift xlleft.
View 9 Replies View RelatedI have an excel workbook with over 900 tabs included. The tabs are named as LS-XXXXXX Ron, LS-XXXXXX Ollie, etc.
I need a macro so that I can delete all the tabs for which the name is
LS-XXXXX Ron. (XXXXXX defines some numbers).
i have an issue i need to delete entire row if a condition is met, i need syntax if possible to delete if a cell word "begins with" a certain letter ...in this case...letter A
column is "O"
must search threw entire row
i want to delete the column which are blank
e.g
i have data in Column A1:N1 then delete the column O:Z
I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
I want to be able to delete certain rows based on multiple criteria. If data in the row does not meat the crieteira, it shud be deleted. I have attached the excel file sample in which I want to keep the highlighed rows and detele the rest. Its base on Origin city and Destination city combination. Eg: If Origin city="A" and Destination City = "B", I want to keep the row. Like wise for all highlighted rows. but if the Origin City = "B" and Destination City = "U" I want to delete the row.
View 9 Replies View Relatedi have a set of data as below and wish to delete ENTIRE ROW if cell is the same but keep the first entry when code comes to it..ie in the data set below excel would keep first row and delete 2nd,3rd,5th, 6,7,8 and then go to next unique identifier which would be AU0000LIFHB3 this would not be deleted as it is unique the would proceed to AU300GPTC011. this process would then stop when no data was available
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU0000LIFHB3
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1050
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300INTE018
AU0000LIFHB3
0
AU300SUNQ027
I need to delete a row of data based on information in two other sheets. Basically, I have a summary page and two other raw sheets which i import data - Today / Yesterday - these sheets are updated daily.
I have 3 different conditions to update my data in sheet " Stock".
1. If not in today and yday / delete row
2. If status in today = "New" copy paste over to stock
3. If in yday not in today / copy and hardcode.
I have briefly done up 2&3 but would appreciate if anyone would like to share how he can do it. Otherwise.. just help on (1) will be greatly appreciated....
have attached a working file..