Suppose I have a excel sheet,in this sheet has 7 columns(A to G).I need to do with my sheet with this condition.
-Keep the rows that have the same value of datas in column A,C,G and they must have different datas in column E and F.
-The other row that not same as above condition must be deleted.
Private Sub cmdNext_Click()
' Save form contents before changing rows:
SaveRow
' check that it is not the last row - if it is then show message
' and do not go to next record:
If Sheets("Data"). Cells(lCurrentRow, 1).Value = "" Then
MsgBox "This is the last Output."
lCurrentRow = lCurrentRow - 1
Exit Sub ' Abort if no data:
Else
LoadRow
End If...................
I'm having trouble with is the bit where it is supposed to ask for the txtAddInfo to be filled (if blank) and if the txtdifference is greater than 10% or less than -10%. It seems to work fine if the txtDifference is less than -10% but not if the txtDifference is greater than 10%. It just seems to get stuck, the message box is displayed even if txtAddInfo has infomation within it.
I'm not sure why as I use ..........
With out using Conditional Formatting, how can I check a cells value if it can fall within a range of +-.002?
I have this code but it seems to have limitations.
Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?
The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).
Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.
I was thinking about doing something like a do nothing until true?
Here's what I have that is not working:
Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select
Loop
I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..
I have two check boxes in a worksheet created from the "Forms" toolbar.
Is it possible to prevent a user from clicking these two check boxes if he meet a condition in cell A1.
Eg, If cell A1 value is "Marketing", the user is not able to click on these two boxes.
If you open the attachment.. then you will see that Column A has all the names and Column B has it's Value.. likewise.. Column D has all the names and Column C has it's values...I'm trying to first match the names from Column A to Column D and then see if Column B matches to Column C..
View 8 Replies View RelatedI would like to change the color of a cell to either green, yellow, or red based on a few conditions. One of the conditions would be based on whether a check box was checked or not.
View 2 Replies View RelatedI need to count all unique entries in column A (list of names) (this bit I can do!)...however:
Column B gives each name a value of A or B, I need to count all unique names with an A and all unique entries with a B.
eg
Matt A
Matt A
Matt A
Bob A
Tom B
Tom B
This would give a count of 2 for A's and 1 for B's.
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
I have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
In a worksheet I have a list starting Col A being the running reference no. such as Action 1, Action 2 and so on. Each time a new action is needed the numbering increased by 1. The next column is the description of the action. This list start at row 39 of this worksheet.
This is a protected worksheet and entry of data is limited to specify cell in the list.
1. Look for the last Action Item.
2. Check if the description column (Col B) is blank.
3. If Col B is blank delete the whole row.
I'm working this spreadsheet and i want to automate of deleting the entire rows once the last two columns contains both Zero values. the worksheet cotains thousands of row to clean-up.
View 3 Replies View RelatedI want to delete a row in excel based on a condition.
The condition is as follows:
I have few rows in the excel where the columns 7,12,13,23 are same and column 24 in one row has some number and in some other row the column 24 is blank with orange color filled(the colorindex for orange is 44).
In this case I want the row with orange color filled in column 24 to be deleted.
I want a macro to delete the entire row based on the value in Column Q ....
View 14 Replies View RelatedI'm working on Outlook 2003 and Word 2000 which are not compatible. I have an
Excel Sheet which are my contacts from Outlook and I want to re-work it to
have only a certain category left.
I need a macro that does
- search a certain column
- deletes the row if it does NOT find a certain condition
Ideal would be a little pop up window to enter which category I want left.
How to delete cell with some condition?
View 1 Replies View RelatedI have some data in numaric form from range a2:f20000 which I have got as a sum from a sheet and I want if any cell (a to f) from row 2 to 20000 has sum up value blank or 0 then it deletes shift xlleft.
View 9 Replies View RelatedI have an excel workbook with over 900 tabs included. The tabs are named as LS-XXXXXX Ron, LS-XXXXXX Ollie, etc.
I need a macro so that I can delete all the tabs for which the name is
LS-XXXXX Ron. (XXXXXX defines some numbers).
i have an issue i need to delete entire row if a condition is met, i need syntax if possible to delete if a cell word "begins with" a certain letter ...in this case...letter A
column is "O"
must search threw entire row
i want to delete the column which are blank
e.g
i have data in Column A1:N1 then delete the column O:Z
I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
What I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies View RelatedIs it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
View 12 Replies View RelatedI want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"
View 9 Replies View RelatedI want to be able to delete certain rows based on multiple criteria. If data in the row does not meat the crieteira, it shud be deleted. I have attached the excel file sample in which I want to keep the highlighed rows and detele the rest. Its base on Origin city and Destination city combination. Eg: If Origin city="A" and Destination City = "B", I want to keep the row. Like wise for all highlighted rows. but if the Origin City = "B" and Destination City = "U" I want to delete the row.
View 9 Replies View Relatedhow to delete duplicate rows except the first and the last rows using macro..
I have data like this and i want to delete those rows except the first and the last rows
31/10/2006
31/10/2006
31/10/2006
31/10/2006
I use the below macros from btadams posted 27th January 2003 but only for delete the last row
Sub DleteDups()
Dim Cell As Range
Do While ActiveCell.Offset(1, 0) <> ""
If ActiveCell.Value <> ActiveCell.Offset(1, 0).Value Then
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.EntireRow.Delete
End If
Loop
End Sub
i have a set of data as below and wish to delete ENTIRE ROW if cell is the same but keep the first entry when code comes to it..ie in the data set below excel would keep first row and delete 2nd,3rd,5th, 6,7,8 and then go to next unique identifier which would be AU0000LIFHB3 this would not be deleted as it is unique the would proceed to AU300GPTC011. this process would then stop when no data was available
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU0000LIFHB3
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1050
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300INTE018
AU0000LIFHB3
0
AU300SUNQ027
I need to delete a row of data based on information in two other sheets. Basically, I have a summary page and two other raw sheets which i import data - Today / Yesterday - these sheets are updated daily.
I have 3 different conditions to update my data in sheet " Stock".
1. If not in today and yday / delete row
2. If status in today = "New" copy paste over to stock
3. If in yday not in today / copy and hardcode.
I have briefly done up 2&3 but would appreciate if anyone would like to share how he can do it. Otherwise.. just help on (1) will be greatly appreciated....
have attached a working file..
complete this coding?
Sub DeleteBlankRowInColumnA()
'this macro scrolls down Column A if the cell is empty the row is deleted.
Dim A As Integer
A = 0
Do Until A = 142
If Range(0, "a1") = 0 Then
Selection.Delete shift:=xlUp
End If
Loop
End Sub