Round Off The Digits For Display In Textbox Of Userform

Jan 21, 2009

I am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!

View 4 Replies


Require 6 Digits In UserForm Textbox?

Mar 6, 2012

I have many textboxes on a UserForm and the value entered must be 6 numeric digits, how can I do this in my code? I understand how to limit with code to numeric numbers in the Exit event but can't find how to REQUIRE all 6 digits be entered.

View 2 Replies View Related

Display Format Of Userform TextBox

May 12, 2013

A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.

eg. enter 123456, TAB, results in textbox display of 123.456

I have tried ...


[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000

View 1 Replies View Related

Error When Trying To Display Cell Value In Userform Textbox

Jul 25, 2014

I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.

I am trying to display the vlookup results in a 4th textbox on my userform.

If I use this code:

[Code] ......

I receive a type mismatch error

if i use THIS code:

[Code] ..........

if works fine!?! what gives?

View 4 Replies View Related

VBACode For Calendar To Display In Userform Textbox

Jul 18, 2012

VBACode for Calendar to display in Userform textboxWhat code so I use in order to have a userform1 calendar linked to a worksheet cell and then have the worksheet cell data displayed in another userform2 textbox?

View 2 Replies View Related

Round To Significant Figures Digits

Aug 23, 2007

Is it possible to specify a number of significant figures (e.g., 3), so that Excel displays only 3 significant figures but RETAINS the full number? For example, take the number 16355.876: is it possible to have Excel display the number as 16400, yet retain the original number 16355.876? I know this is possible when the numbers are less than 1, but I can't seem to figure out how to do it with big numbers.

View 9 Replies View Related

Excel 2007 :: Calculate 2 UserForm TextBoxes And Display Answer In The 3rd TextBox?

Jan 8, 2013

I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:

1)Dead Head Miles 20 +
2) Trip Miles 500
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00

View 9 Replies View Related

Multiply By Percentage And Round Up By Minimum Of 2 Digits If Less Than 2

Jul 9, 2014

I have a spreadsheet where I need to multiply each field in a column by 1.015. However, I need each field to roundup by 2 if the mulitplication is less than 2. For an example, a field of 60 would only increase by .9 to 60.9 when mutliplied by 1.015, but I'd like it to display 62. I have attached the spreadsheet for review.

View 4 Replies View Related

Textbox Round Down Function

Apr 3, 2014

I've got 2 radio buttons to select if i want roundup or rounddown but i don't manage to get the round down process to work.

View 2 Replies View Related

Round A Textbox Number

Aug 21, 2007

I have a number in a cell (12.34) I wish to copy this number into a user form textbox. I can copy the number, however it is about 6 places behind the decimal point. How can I round the number going into a textbox to 2 places?

View 7 Replies View Related

Textbox To Accept 12 Digits

Nov 10, 2008

below code. I need to change this code to accept 12 digits.

View 13 Replies View Related

Round Up Numeric TextBox Entries

Sep 30, 2006

in the timber industry stock lengths for timber start at .900 then go up in .300 mm incriments.

how can i have userform textbox2 return a result as below:

if textbox1 = 2.701 or 2850 or 2.999

textbox2 = 3.000.

if textbox1 = 3.001 or 3.256 or 3.299

textbox2 would = 3.300

so on and so on

i could write a heap of if formulas but i would need every combination from .900 to 6.600

View 9 Replies View Related

Display First 4 Digits Of A Number

Dec 5, 2006

I work in a finance department and we have MANY numbers consisting of 7 digits. Is there a way to enter in the entire number, but only display the first 4 digits?

View 9 Replies View Related

More Than 11 Digits Don't Display In Listbox Column

Jul 30, 2013

i have 2 coulmns in a listbox. The columns cant display more than 11 digits. So basically it would look like this 1.23456789E+12. I even tried playing with the Columnwidth but that didnt work.

View 2 Replies View Related

Display All 8 Digit Numbers That Have The Digits 1-8 In Them

Jul 16, 2008

I need a way to display all 8 digit numbers that have the digits 1-8 in them. (ie. 12345678 but NOT 12345679 OR 12345677) Also If I could somehow divide by 13 then check for whole numbers

View 14 Replies View Related

Display Time In Total Minutes But With A Space After Every 3 Digits

Sep 12, 2012

Need to display time in total minutes but with a space after every 3 digits.

For instance, I can display 0.833333 as total minutes by using the custom number format [m] which displays 1200. But I need it to display as 1 200. I know with a standard number, I could use # ##0 but I don't know how to get both of these custom attributes to work simultaneously.

View 2 Replies View Related

Round CommandButton In Userform?

Feb 12, 2014

Is it possible to have a round commandbutton in userform?

View 3 Replies View Related

Conditional Formatting Userform Textbox Based On Textbox Value?

Jul 3, 2014

I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):

[Code] ........

What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.

View 3 Replies View Related

Userform Textbox Event That Fires After I Exit The Textbox

Feb 2, 2010

I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.

I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.

View 11 Replies View Related

Copy One Value Of Textbox ActiveX On Worksheet To Userform Textbox

Jul 25, 2014

I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....

And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...

View 1 Replies View Related

Adding Text From One Userform Textbox To Another Textbox

Oct 12, 2011

Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer

[Code] .......

Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add

frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"

It actually displays &ForeName & in the text box of the next from rather than what ForeName is..

eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.

What code should i be using to do this, i thought that &ForeName & would work.

View 1 Replies View Related

Copy Value Of Textbox On Worksheet To Textbox On Userform

Jul 27, 2014

I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.

View 1 Replies View Related

Copy From Textbox To TextBox In Another Userform

May 23, 2008

I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?

In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.

I was trying to guess the code... but it is not working...:

UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value

View 3 Replies View Related

How To Print Only Contents Of Textbox From Userform Not Whole Userform

Apr 26, 2014

I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is

[Code] ......

But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...

View 2 Replies View Related

Populate Userform Textbox From Another Userform

Nov 22, 2007

I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.

The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.

I want the textbox (output) to be populated at "Userform intialize" event.

I have tried various other methods without any success.

View 9 Replies View Related

VBA Time Display In Textbox

Mar 22, 2013

I have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.

It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.

the line that reads this value is

.STime.Value = Cells(ActiveCell.Row, "V").Value

View 9 Replies View Related

Display Last Column Value In TextBox

Aug 18, 2007

Is there any wayt to set the ControlSource of a textbox on a form to display the largest value within column A?

View 4 Replies View Related

Number Formatting: The First Three Digits Will Be Separated And Then Subsequently 2 Digits

Oct 31, 2008

i need to format my numbers in the following format


the first three digits will be separated and then subsequently 2 digits

View 2 Replies View Related

Display Value In Textbox When Click Next / Previous

Mar 19, 2014

I want to display the value of the next row or previous row when click Next/Previous button. For example when I click next, report number will be = 789, category = valid, issue = mobile, then reference = reference 3. What code to use?

Refer to the attached file for screenshots : Sample.xlsx‎

View 1 Replies View Related

How To Display Entire Rows In TEXTBOX

May 6, 2014

After running advanced filtering through VBA like that:

[Code] ........

Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).

View 6 Replies View Related

Copyrights 2005-15, All rights reserved