Extend The The Number Of Values In A List Box

Nov 3, 2008

I am using Excel 2003 SP3. How does one extend the the number of values in a list box and retain the same name to be used in the Data / Validation / Settings / Source entry? The only method I see is to extend the list of allowable values and give the longer list a new Name.

View 2 Replies


ADVERTISEMENT

Extend Length Of Dropdown List

May 12, 2009

Is there a way to make the dropdown list come up longer than standard?

View 4 Replies View Related

Automatically Extend Pie Chart To Include Categories When They Have Values

May 29, 2014

I have a pie chart on a pre-defined table with 15 categories where the data will populate over time (presently only 3 are populated) in descending order. As some categories will be blank/zero for a while, I'm trying to find a way to avoid showing the blanks/zeros on the pie chart. As I am trying to display the legend on the pie chart segment, any zeros cause the remaining labels to appear grouped together and rather messy. I would therefore like to hide the zero data from the pie chart so the labels do not appear, or to automatically extend the range to only include all non-zero values.

I found the following formula which, when used as a named range, automatically extends a list for data validation:

[Code] ....

I don't know whether there's a similar formula or whether a few lines of VBA are required to run whenever the chart or data worksheet are selected..?

View 2 Replies View Related

Excel 2010 :: Extend Rows Based On The Number Of Rows In Another Sheet

Jun 16, 2014

calculate the number of full rows in one data base located on one sheet X to determine how many rows the macro needs to extend on sheet B (sheet B is made only of formulas for data interpretation in sheet A.

View 14 Replies View Related

Extract Number Values From A Table And Make A List

Aug 9, 2013

how can i extract all number values from a table column and list them on a separate worksheet? there are blanks in the table column, which have to be omitted.

View 14 Replies View Related

How To Count The Number Of Unique Values In A List, Based On Another Value

Jul 27, 2009

I need to count the unique values in a list based on another value. i.e.

AB ___ Jones
AB ___ Smith
BC ___ Henry
AB ___ Jones
BC ___ Brown
BC ___ Henry
AB ___ Tomkins

For all the AB's in column 1, I need a formula that will give me all the unique names from column 2, in this case 3. I've tried adapting:

=IF(LEN(June!D5:D100),SUMPRODUCT(1/COUNTIF(June!D5:D100,June!D5:D100)))

but haven't been able to get it to work.

View 9 Replies View Related

Formula To Return Number Of Continuous True Values At The End Of A List

Apr 9, 2014

I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.

View 8 Replies View Related

Excel 2010 :: Modify Values In Short List Of Currencies In Home / Number Toolbar

Jun 27, 2013

I recently moved to Central America and now am working on models that are either in $ or in the local currency (Q). I do not want to change my default currency value in the regional settings of the control panel because it is more convenient for me to stay in $ but it is a pain everytime I want to set a worksheet in Q and not in $.

So, I am wondering how I can change the default values in the currency drop-down list on the Home toolbar under Numbers in Excel 2010.

Currently, it gives me the change to apply the following currencies:

- $ English (US)
- £ English (UK)
- € Euro (€ 123)
- ¥ Chinese (PRC)
- fr. French (Switzerland)

Instead of either the £, ¥ or fr., I would like to have listed the Q, my other frequently used currency.

View 3 Replies View Related

Card Count: Use Sheet2 To List Each Card Number And The Number Of Times It Appears In The List

May 4, 2009

I have a sheet which details specific card numbers in Column A, and the date and place of transaction in the Column B. This very long list contains multiple entries for each card number. What I would like to do is use Sheet2 to list each card number and the number of times it appears in the list.

View 4 Replies View Related

Extend Column Instead Of Row?

Dec 16, 2013

When i press the corner of a cell and drag it (example =D2) it will only go higher in the number (drag it 3 rows down it just goes D2, D3, D4, D5, D6).

Can I drag it down but make it stick to the 2 and instead go E2, F2, G2 etc?

View 14 Replies View Related

Extend Highlight Bar

Sep 22, 2009

I am editing a fairly sizeable name, address list and I would like the row highlight bar to extend across the page. For instance, when I click on the row number the highlight bar extends across the row, but when I hit return the highlight disappears and I have to click row by row. I would like the highlight bar to extend across a row and then move up or down with the arrow keys.

View 5 Replies View Related

Extend A Constant Array

Jul 30, 2008

I've never had to venture into Arrays as there was no need.

I'm now faced with Arrays.

Generally I'm able to figure things out, in this case I'm stumped.

What I have is a Constant Array, that output the amount of Rows the Array displayed in.

I know the information is there, what I don't know is how to extend the rows.

ie it Outputs 5 Rows right now, with a top row header.

What I want is 10 rows with a header.

View 9 Replies View Related

Automatically Extend Formulas

Sep 6, 2007

Right now I have a spreadsheet where I have a person enter in 4 differant values in 4 adjacent cells of a row, then in another 4 adjacent cells of the same row calculations are done with respect to the 4 rows of entered information then displayed. Is there a more effective way in placing and copying these formulas in the last 4 adjacent cells rather then just copying the formula into the first 3000 or so rows of cells?

I say 3000 because each project is differant and will require a differant amount of rows, but by copying the formula, even little IF statements, slows down the program and makes printing a hassle.

View 9 Replies View Related

Extend Worksheet To 1 Million Rows?

May 20, 2009

I have a worksheet that was originally saved as a xls (2003) file. I have resaved it as a xlsx (2007) file, but the max rows are still at 65,536. I am trying to combine over 100,000 records into one sheet. The only way I have been able to create a excel document with more than 65,536 rows is to export my records from an Access file.

View 2 Replies View Related

Formula That Will Automaticaly Extend A Series

Feb 23, 2010

I was trying to set yp a formula that will automaticaly extend a series. I mean will add a sequential number to the one above. If I have in cell A1: CD001. I want to place a formula that will show me: CD002 in cell A2. I tried n function but it only converts it to the number and comes uout as 0. I don't know which one to use if there is any. Answer to the first question I will probably be asked: No I cannot drag it down with a mouse as I will place it in the conditional function afterall.

View 5 Replies View Related

Extend Selection Until Cells Are Empty

Jun 15, 2014

If my cursor is in A1 and I want to select all non-empty cells in that column, what is the VBA code that will do that?

(I'm a beginner and have tried recording a macro and inspecting the code, but that always gives me a specific number of cells to select, while I want it to vary by the number of cells that have values. )

View 8 Replies View Related

Extend Non-contiguous Row Selection In Macro

Sep 16, 2008

I get 40~100 page PDFs of purchase orders every week. Each page has one part number and its open order and forecast information. Some pages have a few line of information, some have many lines.

I convert this file into a txt file.

I then create a macro to import it as space delimited and format it.

What I need to do it get rid of the header/footer information on EVERY page.

When the txt file is created it doesn't have any page marks.

The header has "ABC Widgets" as the customer name and then 10 rows of unnecessary information. If I do a Find ALL for "ABC Widgets" and select all, it will delete that header line at every instance, but the leftover selected cells then start not-lining up (meaning I can't just hit "delete row" 10 times and have it pick the right row--the rows don't line up any more and each instance is -1 row offset.)

Is there any way to extend the selection of non-contiguous rows (starting with ABC Widgets) down by 10 so I can delete them?

View 9 Replies View Related

Understanding Code: Extend The Analysis

May 2, 2006

i need to extend the analysis but i have no idea what the 2 modules below do.

Sub mmm()
zonecode = Worksheets("sheet1"). Range("a65536").End(xlUp).Row
etypes = Worksheets("sheet1").Range("iv1").End(xlToLeft).Column
nextline = 2
For i = 2 To zonecodes
zcode = Worksheets("sheet1").Cells(i, 1).Value
For j = 2 To etypes
etype = Worksheets("sheet1").Cells(1, j).Value
enbr = Worksheets("sheet1").Cells(i, j).Value
Worksheets("sheet2").Cells(nextline, 1).Value = zcode
Worksheets("sheet2").Cells(nextline, 2).Value = etype
Worksheets("sheet2").Cells(nextline, 3).Value = enbr
nextline = nextline + 1
Next j
Next i
End Sub....................

View 2 Replies View Related

Extend Formula When Rows Added

Jan 5, 2007

I have a sheet (Sheet 3) that is pre-populated from another sheet (Sheet 1), and the user is allowed to update the numbers (for forecasting).

I have a column ( Total Hours) that I use to total the new numbers in the row.

If the user inserts a row, the Total Hours formula does not follow. This is the Total Hours formula that I am using SUM Formula
(=IF(SUM($G30:$AP30)=0,"",SUM($G30:$AP30))

How do I (Can I) get the formula to cascade into the new row.

View 8 Replies View Related

Extend Range To Longest Column

Aug 7, 2007

I had asked about automatically naming regions and this is an extension of that post because it's closed. The code we ended up with to name the region is:
Dim sNm As String, sRT As String

If Intersect(Target, Rows(1)) Is Nothing Then Exit Sub '------------------->
If Target.Count > 1 Then Exit Sub '---------------------------------------->

sNm = Replace(Trim(Target), " ", "_")
sRT = "=offset(" _
& Target.Address _
& ", 1, 0, counta(" _
& Cells(2, Target.Column).Resize(Rows.Count - Target.Row).Address & ") )"

ThisWorkbook.Names.Add Name:=sNm, RefersTo:=sRT

My problem now is that I need to have the regions be the length of the longest column. I've tried using a few different ways using the worksheet range but I can't seem to get it to work.

View 9 Replies View Related

Extend Range Of Table Automatically To Fit Data

Jul 14, 2014

I have two data tables (Table1 and Table2) on two different sheets (Sheet 1 and Sheet 2). In Col1 of Table2, I have "copied" the values of Col1 in Table1 by using a simple equal (=) formula. Secondly, I have an autofilter on Table2 and a macro that automatically updates the filter when the sheet (Sheet 2) is selected.

My problem is that I would like Table2 to be more dyanmic, i.e. I don't want to change the range of the Table2 each time I add, or subtract, a value from Table1.

Could a OFFSET formula be employed in any way?

I have attached an example file.

The macro is:

[Code] .....

ExpandTableExample.xlsm‎

View 1 Replies View Related

Isnumeric Function - Getting Range To Extend By 1 If Not Numeric

Apr 29, 2014

So I found a great piece of code which calculates relative strength index. However, I've been trying to edit it to make it a bit more dynamic and I'm really struggling to get it to work.

Right now the initial code is:

Code:
Function RSI(MyCells As Range)
Dim up_day, down_day
Dim average_up, average_down
Dim RS, cellcount As Long
Dim cll As Rangeups = 0up_day = 0downs = 0down_day = 0cellcount = 0For Each cll In MyCells

[Code] ..........

Basically I tried to amend this as follows:

Code:
Function RSE(MyCells As Range, Length As Double)Dim up_day, down_day, ups, downs
Dim average_up, average_down
Dim rs, cellcount, rangecount As Long
Dim cll As Range
ups = 0

[Code] ..........

Basically i wanted it to look at the numbers in the range and then error check to see if it was a number... if it was a number great. If not then the length of numbers it should calculate across should increase by 1 as it has to include another number to calc across (hope this makes sense). however, i just cant get it to work at all. My code doesn't seem to make any difference. And it also raises the issue of the fact that the intial value for length also needs to be stored to do the final calc.

View 1 Replies View Related

Extend Formula Automatically As Data Entered

May 21, 2008

I found the following code here.

For data entered into column A, it copies the formulas from columns B:E in the row above to the current row.

It works great except fot the first row (A9) where it copies the header row (B8:E8).

How can I get it to not copy when data is entered into A9?

Private Sub Worksheet_Change(ByVal Target As Excel. Range)
Dim c As Range, i As Long
On Error Resume Next
Set c = Intersect(Target, Columns(1))
If c Is Nothing Then Exit Sub
If IsEmpty(c.Offset(-1, 0)) Or Not IsEmpty(c.Offset(1, 0)) Then Exit Sub
i = c.Row
Application.EnableEvents = False
Range("B" & i - 1 & ":E" & i - 1).Copy Range("B" & i & ":E" & i)
Application.EnableEvents = True
On Error Goto 0
End Sub

View 4 Replies View Related

Extend Formula Each Time Data Entered In Column Of Next Row

Nov 30, 2012

I have a spreadsheet that requires a formula in column "e". How can I automaticlly extend the formula each time data is entered in column "d" of the next row.

View 7 Replies View Related

Excel 2010 :: VBA Code To Extend Formula To (End Of Data)

Mar 4, 2014

I created the following macro (using the recorder), and now need to modify it so that the formula extends to the end of the data (and no further). I would also like to include a total at the end.

Sub ExcessUsage2()
' ExcessUsage2 Macro
Rows("39:250").Select
With Selection.Font
.Size = 8
.Strikethrough = False

[Code0 ....

View 8 Replies View Related

Extend Formula As Many Data Rows As Referenced Column

Oct 31, 2006

I am after an automatic formula or function which calculates values for long lists instead of me dragging down the formula all the way to the end of the document.

Hence, I have a long list of data in columns A, B&C and I want the formula in column D to automatically be calculated all the way down when the list stops.

View 9 Replies View Related

Extend Selection From Active Cell To Desired Column

Apr 15, 2008

1st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:

ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select

Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?

View 6 Replies View Related

Ensure Selection Row Deletion Doesn't Extend Past Certain Row

May 27, 2008

I have a delete button on a protected sheet to allow a user to delete selected rows (unprotects, deletes, protects again...).

I need to add a check to make sure they do not delete any row greater than 152. How can I check if a row greater than 152 is in their range of selected rows?

View 7 Replies View Related

Excel 2007 :: Formula Range Auto Extend Doesn't Work?

Jul 31, 2014

I am using office 2007 and here is the problem I am facing. I am using a formula and it is based on two columns data. The formula result is at C20:C2400, while the two data columns are at A20:A2400 and B20:B2400. I add one more row of data at A2401 and B2401, I expect the formula result would auto extend to C2401 but it doesn't, nothing happen.

I check that I need to turn on the auto extend check box in option, I check and it is already on.

View 3 Replies View Related

Excel 2013 :: Formula To Auto Delete Number In Dropdown List When Number Appears In Another Cell

Apr 27, 2014

I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved