I have a worksheet that was originally saved as a xls (2003) file. I have resaved it as a xlsx (2007) file, but the max rows are still at 65,536. I am trying to combine over 100,000 records into one sheet. The only way I have been able to create a excel document with more than 65,536 rows is to export my records from an Access file.
View 2 RepliesI've accidentally created over 1 million rows across several sheets which has sent my file size over 35mb.
I desperately need to delete these and cannot find any way of doing so.
They were created through macros copying columns and pasting them elsewhere, although I'm not sure how they decided that 4-800 rows of data was worth a million rows.
Can anyone offer a solution that doesn't entail making a new sheet and rewriting all the forumula's in it?
I have a comma delimited CSV file that holds about 2 millions rows of data (a lot I know but it's the only format I can work with unfortunately). One of the rows has some numbers in it that have lots of decimal places (like 3.908651901). I need to round that entire column - all 2 million rows - to whole integers.
The problem is that when I open it in excel it says something like "only 1 million rows shown". After more investigation I have found out that excel cannot handle more than 1 millions rows at a time.
My question is this: If I select the whole column and round the numbers to integers will that apply to the entire 2 millions rows? Or only the 1 million showing in excel?
Are there any other programs available that can handle 2-2.5 million rows and change the column to whole integers?
calculate the number of full rows in one data base located on one sheet X to determine how many rows the macro needs to extend on sheet B (sheet B is made only of formulas for data interpretation in sheet A.
View 14 Replies View Relatedcode to import a tab delimited text file with about 3 million rows so that it creates a new tab every time it hits the 1 million row limit?
View 3 Replies View RelatedI have a number of large CSV files with approximately 1.9 million rows, (this is more then excel can bring in). I typically have to import/delimit the files when brining them into excel. However, when I try this I get the message not all data imported. I would like to be able to split the records in the csv file to multiple tabs in the excel woorkbook when doing the import/delimit but do not know how to accomplish this. The delimit of the data varies each time due to the nature of the data so doing a macro is more trouble to create each time. Currently I am having to open the csv file in notepad and split it up into multiple files then import each new file seperately.
View 4 Replies View RelatedI have a sheet (Sheet 3) that is pre-populated from another sheet (Sheet 1), and the user is allowed to update the numbers (for forecasting).
I have a column ( Total Hours) that I use to total the new numbers in the row.
If the user inserts a row, the Total Hours formula does not follow. This is the Total Hours formula that I am using SUM Formula
(=IF(SUM($G30:$AP30)=0,"",SUM($G30:$AP30))
How do I (Can I) get the formula to cascade into the new row.
I am after an automatic formula or function which calculates values for long lists instead of me dragging down the formula all the way to the end of the document.
Hence, I have a long list of data in columns A, B&C and I want the formula in column D to automatically be calculated all the way down when the list stops.
Is it practical to attempt to iterate over all cells in Application.Cells when using Excel 2007? I am truely amazed by the number of cells available but slighty unsure of the practicality of a spreadsheet which attempts to use of the 17,179,869,184 cells in each worksheet!
View 9 Replies View RelatedSee attached sheet "Selected estimate", Cell B4 and Down, This was working before I made some edits to the "checklist" sheet. I have hit C+S+E a million times and I cannot figure out how I broke this forumla. Btw, this is excel 2007
View 2 Replies View RelatedWhat I am trying to do is, (I'll generally explain it and will go in details when needed) I have four tabs, but right now I will focus on two tabs. The first tab is called DATA_INPUT, will be the raw data inputted by users, approximately 45,000 to 50,000 rows. The second tab is called DATA_SET has data that are already set from previous reconciliation, this tab has approximately 10,000 rows.
my goal is to do a search from data_input starting with row 3 all the way to the last row, and search to see if any of these data are in the DATA_SET tab. Vlookup will not work if any of you are thinking about this, b/c the datas are in phrase and the data_set data are in chunks of that phrase (i'll explain in detail if needed).
So far I've created a loop code that works and gets me the result I want, but the problem with the data's being so huge, the loop will be looping apprx 500 million times, this cause the program to run very very low. For example to run 1000 data from DATA_INPUT it takes apprx 30 minutes or more and sometimes b/c this is so huge it crashes. i'll already did the calculation of how many loop it has to run through to finish, it's about 500 million loops (50000*8000 = 400,000,000 plus looping through the phrase to find the word match, approx 500 million loops).
SO my question is how can I make my program run faster since it need to loop so many times, or if you have a better suggestion in solving this problem, let me know....
Will some one guide me, How can i covert my currency (Rupee) in to Million?
(2700000 Rs Into Million with formula/automatically)
Secondly,
Can i make in a specific cell 4 colums & 2 rows ? Is it possible. ?
Cell I5 has the sum of cells A5:H5. Every time the value of cell I5 reaches the next million, I'd like for the date that it reaches the next million to be displayed in J5.
View 9 Replies View RelatedCount all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part
Code:
Sub CountRows()
Dim Rng As Range, CountTrue As Long
Set Rng = Sheets("Checklist").Range("Work")
CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")
End Sub
When i press the corner of a cell and drag it (example =D2) it will only go higher in the number (drag it 3 rows down it just goes D2, D3, D4, D5, D6).
Can I drag it down but make it stick to the 2 and instead go E2, F2, G2 etc?
I am editing a fairly sizeable name, address list and I would like the row highlight bar to extend across the page. For instance, when I click on the row number the highlight bar extends across the row, but when I hit return the highlight disappears and I have to click row by row. I would like the highlight bar to extend across a row and then move up or down with the arrow keys.
View 5 Replies View RelatedI've never had to venture into Arrays as there was no need.
I'm now faced with Arrays.
Generally I'm able to figure things out, in this case I'm stumped.
What I have is a Constant Array, that output the amount of Rows the Array displayed in.
I know the information is there, what I don't know is how to extend the rows.
ie it Outputs 5 Rows right now, with a top row header.
What I want is 10 rows with a header.
Right now I have a spreadsheet where I have a person enter in 4 differant values in 4 adjacent cells of a row, then in another 4 adjacent cells of the same row calculations are done with respect to the 4 rows of entered information then displayed. Is there a more effective way in placing and copying these formulas in the last 4 adjacent cells rather then just copying the formula into the first 3000 or so rows of cells?
I say 3000 because each project is differant and will require a differant amount of rows, but by copying the formula, even little IF statements, slows down the program and makes printing a hassle.
Is there a way to make the dropdown list come up longer than standard?
View 4 Replies View RelatedI am using Excel 2003 SP3. How does one extend the the number of values in a list box and retain the same name to be used in the Data / Validation / Settings / Source entry? The only method I see is to extend the list of allowable values and give the longer list a new Name.
View 2 Replies View RelatedI was trying to set yp a formula that will automaticaly extend a series. I mean will add a sequential number to the one above. If I have in cell A1: CD001. I want to place a formula that will show me: CD002 in cell A2. I tried n function but it only converts it to the number and comes uout as 0. I don't know which one to use if there is any. Answer to the first question I will probably be asked: No I cannot drag it down with a mouse as I will place it in the conditional function afterall.
View 5 Replies View RelatedIf my cursor is in A1 and I want to select all non-empty cells in that column, what is the VBA code that will do that?
(I'm a beginner and have tried recording a macro and inspecting the code, but that always gives me a specific number of cells to select, while I want it to vary by the number of cells that have values. )
I get 40~100 page PDFs of purchase orders every week. Each page has one part number and its open order and forecast information. Some pages have a few line of information, some have many lines.
I convert this file into a txt file.
I then create a macro to import it as space delimited and format it.
What I need to do it get rid of the header/footer information on EVERY page.
When the txt file is created it doesn't have any page marks.
The header has "ABC Widgets" as the customer name and then 10 rows of unnecessary information. If I do a Find ALL for "ABC Widgets" and select all, it will delete that header line at every instance, but the leftover selected cells then start not-lining up (meaning I can't just hit "delete row" 10 times and have it pick the right row--the rows don't line up any more and each instance is -1 row offset.)
Is there any way to extend the selection of non-contiguous rows (starting with ABC Widgets) down by 10 so I can delete them?
i need to extend the analysis but i have no idea what the 2 modules below do.
Sub mmm()
zonecode = Worksheets("sheet1"). Range("a65536").End(xlUp).Row
etypes = Worksheets("sheet1").Range("iv1").End(xlToLeft).Column
nextline = 2
For i = 2 To zonecodes
zcode = Worksheets("sheet1").Cells(i, 1).Value
For j = 2 To etypes
etype = Worksheets("sheet1").Cells(1, j).Value
enbr = Worksheets("sheet1").Cells(i, j).Value
Worksheets("sheet2").Cells(nextline, 1).Value = zcode
Worksheets("sheet2").Cells(nextline, 2).Value = etype
Worksheets("sheet2").Cells(nextline, 3).Value = enbr
nextline = nextline + 1
Next j
Next i
End Sub....................
I had asked about automatically naming regions and this is an extension of that post because it's closed. The code we ended up with to name the region is:
Dim sNm As String, sRT As String
If Intersect(Target, Rows(1)) Is Nothing Then Exit Sub '------------------->
If Target.Count > 1 Then Exit Sub '---------------------------------------->
sNm = Replace(Trim(Target), " ", "_")
sRT = "=offset(" _
& Target.Address _
& ", 1, 0, counta(" _
& Cells(2, Target.Column).Resize(Rows.Count - Target.Row).Address & ") )"
ThisWorkbook.Names.Add Name:=sNm, RefersTo:=sRT
My problem now is that I need to have the regions be the length of the longest column. I've tried using a few different ways using the worksheet range but I can't seem to get it to work.
I have two data tables (Table1 and Table2) on two different sheets (Sheet 1 and Sheet 2). In Col1 of Table2, I have "copied" the values of Col1 in Table1 by using a simple equal (=) formula. Secondly, I have an autofilter on Table2 and a macro that automatically updates the filter when the sheet (Sheet 2) is selected.
My problem is that I would like Table2 to be more dyanmic, i.e. I don't want to change the range of the Table2 each time I add, or subtract, a value from Table1.
Could a OFFSET formula be employed in any way?
I have attached an example file.
The macro is:
[Code] .....
ExpandTableExample.xlsm
So I found a great piece of code which calculates relative strength index. However, I've been trying to edit it to make it a bit more dynamic and I'm really struggling to get it to work.
Right now the initial code is:
Code:
Function RSI(MyCells As Range)
Dim up_day, down_day
Dim average_up, average_down
Dim RS, cellcount As Long
Dim cll As Rangeups = 0up_day = 0downs = 0down_day = 0cellcount = 0For Each cll In MyCells
[Code] ..........
Basically I tried to amend this as follows:
Code:
Function RSE(MyCells As Range, Length As Double)Dim up_day, down_day, ups, downs
Dim average_up, average_down
Dim rs, cellcount, rangecount As Long
Dim cll As Range
ups = 0
[Code] ..........
Basically i wanted it to look at the numbers in the range and then error check to see if it was a number... if it was a number great. If not then the length of numbers it should calculate across should increase by 1 as it has to include another number to calc across (hope this makes sense). however, i just cant get it to work at all. My code doesn't seem to make any difference. And it also raises the issue of the fact that the intial value for length also needs to be stored to do the final calc.
I found the following code here.
For data entered into column A, it copies the formulas from columns B:E in the row above to the current row.
It works great except fot the first row (A9) where it copies the header row (B8:E8).
How can I get it to not copy when data is entered into A9?
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
Dim c As Range, i As Long
On Error Resume Next
Set c = Intersect(Target, Columns(1))
If c Is Nothing Then Exit Sub
If IsEmpty(c.Offset(-1, 0)) Or Not IsEmpty(c.Offset(1, 0)) Then Exit Sub
i = c.Row
Application.EnableEvents = False
Range("B" & i - 1 & ":E" & i - 1).Copy Range("B" & i & ":E" & i)
Application.EnableEvents = True
On Error Goto 0
End Sub
I have a pie chart on a pre-defined table with 15 categories where the data will populate over time (presently only 3 are populated) in descending order. As some categories will be blank/zero for a while, I'm trying to find a way to avoid showing the blanks/zeros on the pie chart. As I am trying to display the legend on the pie chart segment, any zeros cause the remaining labels to appear grouped together and rather messy. I would therefore like to hide the zero data from the pie chart so the labels do not appear, or to automatically extend the range to only include all non-zero values.
I found the following formula which, when used as a named range, automatically extends a list for data validation:
[Code] ....
I don't know whether there's a similar formula or whether a few lines of VBA are required to run whenever the chart or data worksheet are selected..?
I have a spreadsheet that requires a formula in column "e". How can I automaticlly extend the formula each time data is entered in column "d" of the next row.
View 7 Replies View Related