my colleague did something to one of our files and it is now 845918 kb. I transferred it to a flash drive and then to my hard drive but now I cant open it to see what is wrong. Is there a trick to opening this up? When it was opened on her computer it wouldn't let me add any tabs or move tabs. I think I unprotected it but that didn't change anything.
View 1 Replies
I've got a 80 Mb CSV file and would like to open and work with it. Too many lines (90000 or so).
Is there a way to split ( ) this file so I can open two files instead?
I have a SUPER large CSV file that I cannot open in 2002 excel
Is there a way to write in VBA to import the csv but only include rows that contain "TESTIMPORT" in a cell?
I have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
I have a large text file (greater than 64k lines) which I need to import into excel. I only need anything imported from the text file that is for dates I specify. So I would like to run a line by line query and only import the lines I need.
The dates are always in position 43-50 (dd-mm-yy) in the text file itself, so the code would have to look at that section, see if the date is within the range specified and only import if it is (and then move onto the next line).
I have a large text file (greater than 64k lines) which I need to import into excel. I only need anything imported from the text file that is for dates I specify. So I would like to run a line by line query and only import the lines I need.
The dates are always in position 43-50 (dd-mm-yy) in the text file itself, so the code would have to look at that section, see if the date is within the range specified and only import if it is (and then move onto the next line).
i always receive 200 mb file. which i has, around 10 sheets , with pivot tables and formulas.
i have to open this file update refresh and save as this file, which i am doing via vba.
however the challenge for me here is though i set xl calculation to manual at the begining and xl calculation to automatic at the end. Though i used this code, its taking close to 5 mins to complete this via Vba.
how or what is the alternate way to reduce.
I have a large Excel 2007 file, around 60.000KB. 54.000KB are due to one of the worksheets where I have 8760rows x 160columns with data. The calculation time is not a problem, it is very fast, it only takes 2/3 seconds. The problem is when I open or save the file, it takes around 2 minutes... it is not too much, but it becomes too long when one has to open and save it several times. It there any trick to decrease the time when openning or saving an excel file??
View 3 Replies View RelatedI have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedI want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedI have a database of 75000 rows in text format which has to be converted to excel, but the limitation in excel is only 65536. hence, I want to a macro that will copy the 1st 65536 rows into the 1st sheet in excel. The remaining rows should be copied into the second sheet. I know that it can be done with access. but i dont want to use access.
I have got a code to do this, but it takes much too long. if the code could be modified to make it faster,
Sub LargeFileImport()
'Dimension Variables
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g.
I have a 14.3 MB xlsb file that I am trying to open with no success as it just hangs. Anyone have any ideas on how to get the data out of there? I would like to be able to get the data to a pivot and copy the pivot to another file to try and reduce the load on one file. I tried to import to Access but was told I was using a file version before 2007, which is impossible since it is a xlsb file.
View 9 Replies View RelatedI have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I'm doing the following:
Dim myname As String
myname = Application. GetOpenFilename
I use it to attempt to open first a QuickBooks file and then an excel workbook.
The Quickbooks file opens fine. The Excel workbook never appears to open but
I do get the full file pathname to my excel workbook returned which I then
parse off to get just the workbook name.
Why would it behave this way? I open both these files manually all the time.
Also, I'm trying to use a filter as follows:
myname = Application.GetOpenFilename("*.QBW")
I get a compile error saying that I'm calling the function wrong.
I've been having tremendous issues with my Excel file, mostly with it crashing or not responding. Would this be because my file has so much data in it? If so, is there anyway to make Excel process all the data without crashing so much?
View 6 Replies View RelatedI have a large text file, 75mb, that I would like to import into Excel but it goes well beyond the 65536 lines available.
Is there a process to get these files into excel? File splitter?
I want to use the attached Test.xls file below and do a lookup from the Data.csv (see zip file) where "Empl ID" (column A in Test.xls) matches "ID" (column A in Data.csv). I want to bring back "SupvID" (column B in Data.csv) into column D in Test.xls.
The problem I have is that in real life Data.csv is a very large file and contains more than Excel's maximum number of rows. I want to automate this using VBA to lookup the values without opening the csv file.
I have looked at a number of forums for answers and I can see where using an ADO connection will probably help accomplish this, but I can't seem to get it to work on these specific files.
I have a file that is 40,000K...is there anyway to decrease this file size without having to delete data or break up the spreadsheet?
I couldn't think of anything but wanted to double check.
I have some spreadsheets one worksheet little data and it saved as it a 5MB file when it should only save as something like 500Kb, what would cause this?
View 3 Replies View RelatedMy pivot table file is currently 12.7 MB and I need to get it much smaller so I can email it and it still be functional with the data.
I have tried right clicking on the pivot table, going to PivotTable Options, clicking on the data tab, unchecking the 'save source data with file' box, and checking the 'refresh data when opening file' box. This shrunk the file perfectly but when i email the file the Pivot Table was unusable because there was no data to back up the function.
The Error messages I got were 'Cannot open PivotTable source file'..... and 'Pivot Table report was saved without the underlying data. Use the Refresh Data command to update the report'. When I click on Refresh Data I still get the same error message.
Any way I can make this File smaller and still functional.
I've been scouring the Internet for a few days now trying to get a macro working with varying degrees of success. It's driving me mad and I'm really hoping that someone out there can help me out. I'm trying to write a macro that will ...
1. Take a .xls file
2. Split the file in two
3. Take cells B2:B11 and paste them in to a csv file (to be called Upload1.csv) using the rows as column headers (i.e. B2:B11 now become A1:J1)
4. Take cells A13-J13 downwards (this file will have different numbers of rows each time it's generated) and paste them into a different csv file (to be called Upload2.csv) populating all the rows (except all rows in column I which are to be left blank) and all rows in Column J which are to contain the info in cell B7 of the original document.
5. In cell B11 of the original document I must only take the information that says MyAddress:xxxxx and discard all the other info
6. I must also loop through the second document until I find the words Total and copy everything UNTIL that row into the new document.
I know this probably sounds pretty awkward but in practice it's not that difficult to understand, it's probably the way that I've explained it
So far I've managed to take the original document and split it, populate both CSV files but I'm having problems with looping the macro until it sees the word Total and discards it and also populating the appropriate rows with the info from B7 ... I don't know how to make it populate only the rows that have info on them.
I've attached the original Excel file that is generated and also my attempt at the 2 csv files. I've also written in RED what needs to go where in each document.
I have a large *.tab file with around 450,000 records. I opened the file in excel and then filtered two columns where there are values equal to 0.
I then highlight all the rows and try to delete them, but I receive the following error popup box:
"Microsoft Excel cannot create or use the data range reference because it is too complex."
How can I delete all these filtered = 0 rows without getting this error??
I am trying to open a website, then for excel to download the csv file, then for it to save it in a specific folder under a specific name and file format (excel).
I am successful at opening the website with the following code, but how to do the rest.
Sub Searchez()
Dim IE As Object
Set IE = CreateObject("InternetExplorer.Application")
IE.Navigate "http://quote.morningstar.ca/Quicktakes/stock/keyratios.aspx?t=clwr®ion=USA&culture=en-CA&ops=clear" 'load web page google.com
IE.Visible = True
While IE.Busy
DoEvents
Wend
'IE.Navigate2 "javascript:SRT_keystuts.exportcsv()"
'this is the name of the download link as from when i hover my pointer over download link.
End Sub
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
I want to open a specific sheet and refresh only said sheet when i open another sheet for example x.xls
So opening x.xls will automatically open y.xls
I've tried this in the workbook code area but it doesn't do anything.
[Code] .....
Actually i've downloaded Tracking report of my SPO and this report is on 4-5 csv files (1 file per week). I have to gather data from these 4 files into one Worksheet. I have to do this with command button on my worksheet; with Open file dialogue box (i want to locate the csv files).
CSV files are something like that (I need only first 4 columns):
ABCDE1Name MSISDN Date Location MapLink 2M. Younus Safi "923***550577" "2011-10-07 20:36:18" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 3M. Younus Safi "923***550577" "2011-10-07 19:36:26" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 4M. Younus Safi "923***550577" "2011-10-07 16:39:58" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 5M. Younus Safi "923***550577" "2011-10-07 15:37:23" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com" 6M. Younus Safi "923***550577" "2011-10-07 14:37:05" "ACB Tower Badragah Chakwal. Badraga" "http://asdf.com"
and my Worksheet is like that (With a command Button):
I want to import first 3 columns of csv file on first 3 columns on my worksheet; leave 2 columns blank and then import the 4th column... now for example i have done importing data from 1st csv file and the data is on 50 rows.. i click the command button again, locate the 2nd csv file.. do the same thing (import 1st 3 columns, 2 blank, then 4th) --from 51st Row-- and so on...
ABCDEF1NameMSISDN DatedBlankBlank Location2
3
4
5
6
7
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
I have the need to be able to open a closed file to archive some data from a
current file.
what coding i need to be able to kick the "open file" bit off?
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I'm using Excel 2007. I have a cell with a dropdown box that has the values 1 thru 10. When I save the file (as an Excel 97-2003 compatible .xls file), it's 17kb which is normal. I want multiple dropdown boxes going down the same column, so that every time the user goes to the next row, another dropdown box will be displayed. I copied the cell with the dropdown box, selected the entire column, and pasted the dropdown box.
This time when I save the document, it's over 2MB in file size. I've seen other spreadsheets with several columns of dropdown boxes spanning thousands of rows and they stay under 30kb. I don't know what they did differently to keep their file size small. Why is my file size so large and how do I fix this? Do I need to use a 'paste special' function?
