I've been having tremendous issues with my Excel file, mostly with it crashing or not responding. Would this be because my file has so much data in it? If so, is there anyway to make Excel process all the data without crashing so much?
View 6 RepliesI have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
I have an Excel file that's updated monthly. when it does save its around 16mb and can take up to 12 hours to save, and sometimes just doesn't.
I have tried saving as binary, I have made sure exact size of area to be saved is required, I have tried save with no calculations.
Basically the only reason I need to save it is so that another analysis spreadsheet can pull data from it. The file is heavily formatted, charts, vlookup tables etc, none of which is needed when analysis spreadsheet links to it.
I have a file that has been produced using Statistica software. The file is supposed to have around one million rows, and when exported to Excel the file is about 30 MB. When I open the .xlsx file in Excel 2010 only two pages of data appear. The rows also have weird numbering. The first square of the A column is A1. The second is A3833, the third is A6789, then A8161, then A8162, then A8163, then A8164, then A18070.
The scroll button to the left of the screen is long, as if the document was only two pages long. When the scroll button is click-and-dragged a small beige square appears with a row number. This small square seems to be aware that not all rows are shown as it shows many more rows than are visible to me.
code to import a tab delimited text file with about 3 million rows so that it creates a new tab every time it hits the 1 million row limit?
View 3 Replies View RelatedI have this excel file that is 17 sheets long and I made a table of contents page so it is easier for people to navigate. I know my hypertext links in my file are correct because it works when I click on the hypertexted cells, my excel file jumps to the respective sheet.
However, when I save the file as a pdf the hypertext links do not work. how to get my table of contexts to jump pages in a saved pdf file?
I've got a 80 Mb CSV file and would like to open and work with it. Too many lines (90000 or so).
Is there a way to split ( ) this file so I can open two files instead?
How come in 2013 there does not seem to be an option to "save as" an earlier version of Excel, specifically 2010?
I opened up something from work (2010) at home (2013) and must have refined it (nothing complicated or fancy that 2010 can't do!)
Now it won't open up at work and tells me to reopen and save as the old version.But 2013 won't let me.
I found the thread about how to get the second best result (=LARGE(range,2)) but that can't handle when I have ywo top values and a lower third value. It still return the next value after the top value, which is the same value. I want to get the next lowest vaule.
Example:
In this row:
7
7
6
5
5
4
I want to get the value 6 and the formula =LARGE(range,2) gives the second number 7.
How do I get the second value that I want?
Maybe if I use the RANK() formula in some way, but how?
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
my colleague did something to one of our files and it is now 845918 kb. I transferred it to a flash drive and then to my hard drive but now I cant open it to see what is wrong. Is there a trick to opening this up? When it was opened on her computer it wouldn't let me add any tabs or move tabs. I think I unprotected it but that didn't change anything.
View 1 Replies View RelatedI have a database of 75000 rows in text format which has to be converted to excel, but the limitation in excel is only 65536. hence, I want to a macro that will copy the 1st 65536 rows into the 1st sheet in excel. The remaining rows should be copied into the second sheet. I know that it can be done with access. but i dont want to use access.
I have got a code to do this, but it takes much too long. if the code could be modified to make it faster,
Sub LargeFileImport()
'Dimension Variables
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g.
I have a 14.3 MB xlsb file that I am trying to open with no success as it just hangs. Anyone have any ideas on how to get the data out of there? I would like to be able to get the data to a pivot and copy the pivot to another file to try and reduce the load on one file. I tried to import to Access but was told I was using a file version before 2007, which is impossible since it is a xlsb file.
View 9 Replies View RelatedI have a SUPER large CSV file that I cannot open in 2002 excel
Is there a way to write in VBA to import the csv but only include rows that contain "TESTIMPORT" in a cell?
I have a large text file, 75mb, that I would like to import into Excel but it goes well beyond the 65536 lines available.
Is there a process to get these files into excel? File splitter?
I want to use the attached Test.xls file below and do a lookup from the Data.csv (see zip file) where "Empl ID" (column A in Test.xls) matches "ID" (column A in Data.csv). I want to bring back "SupvID" (column B in Data.csv) into column D in Test.xls.
The problem I have is that in real life Data.csv is a very large file and contains more than Excel's maximum number of rows. I want to automate this using VBA to lookup the values without opening the csv file.
I have looked at a number of forums for answers and I can see where using an ADO connection will probably help accomplish this, but I can't seem to get it to work on these specific files.
I have a file that is 40,000K...is there anyway to decrease this file size without having to delete data or break up the spreadsheet?
I couldn't think of anything but wanted to double check.
I have a large text file (greater than 64k lines) which I need to import into excel. I only need anything imported from the text file that is for dates I specify. So I would like to run a line by line query and only import the lines I need.
The dates are always in position 43-50 (dd-mm-yy) in the text file itself, so the code would have to look at that section, see if the date is within the range specified and only import if it is (and then move onto the next line).
I have some spreadsheets one worksheet little data and it saved as it a 5MB file when it should only save as something like 500Kb, what would cause this?
View 3 Replies View RelatedUsing Office 2000, here is the code I am using which works on my laptop with Office 2007. This file is initially saved as a template (.xlt) file. This code works if I right-click and open the template and enter data, but when I just double click and open, causing it to open as an .xls file, it doesn't work. (The textboxes are inserted textboxes not from a userform).
VBA:
Option Explicit
Sub Text_Copy()
With Worksheets("Description")
Worksheets("Summary").Shapes("TextBox3").TextFrame.Characters.Text = .Shapes("TextBox1").TextFrame.Characters.Text & " " & .Shapes("TextBox2").TextFrame.Characters.Text
End With
End Sub
I have a large text file (greater than 64k lines) which I need to import into excel. I only need anything imported from the text file that is for dates I specify. So I would like to run a line by line query and only import the lines I need.
The dates are always in position 43-50 (dd-mm-yy) in the text file itself, so the code would have to look at that section, see if the date is within the range specified and only import if it is (and then move onto the next line).
My pivot table file is currently 12.7 MB and I need to get it much smaller so I can email it and it still be functional with the data.
I have tried right clicking on the pivot table, going to PivotTable Options, clicking on the data tab, unchecking the 'save source data with file' box, and checking the 'refresh data when opening file' box. This shrunk the file perfectly but when i email the file the Pivot Table was unusable because there was no data to back up the function.
The Error messages I got were 'Cannot open PivotTable source file'..... and 'Pivot Table report was saved without the underlying data. Use the Refresh Data command to update the report'. When I click on Refresh Data I still get the same error message.
Any way I can make this File smaller and still functional.
I've been scouring the Internet for a few days now trying to get a macro working with varying degrees of success. It's driving me mad and I'm really hoping that someone out there can help me out. I'm trying to write a macro that will ...
1. Take a .xls file
2. Split the file in two
3. Take cells B2:B11 and paste them in to a csv file (to be called Upload1.csv) using the rows as column headers (i.e. B2:B11 now become A1:J1)
4. Take cells A13-J13 downwards (this file will have different numbers of rows each time it's generated) and paste them into a different csv file (to be called Upload2.csv) populating all the rows (except all rows in column I which are to be left blank) and all rows in Column J which are to contain the info in cell B7 of the original document.
5. In cell B11 of the original document I must only take the information that says MyAddress:xxxxx and discard all the other info
6. I must also loop through the second document until I find the words Total and copy everything UNTIL that row into the new document.
I know this probably sounds pretty awkward but in practice it's not that difficult to understand, it's probably the way that I've explained it
So far I've managed to take the original document and split it, populate both CSV files but I'm having problems with looping the macro until it sees the word Total and discards it and also populating the appropriate rows with the info from B7 ... I don't know how to make it populate only the rows that have info on them.
I've attached the original Excel file that is generated and also my attempt at the 2 csv files. I've also written in RED what needs to go where in each document.
I have a large *.tab file with around 450,000 records. I opened the file in excel and then filtered two columns where there are values equal to 0.
I then highlight all the rows and try to delete them, but I receive the following error popup box:
"Microsoft Excel cannot create or use the data range reference because it is too complex."
How can I delete all these filtered = 0 rows without getting this error??
I'm using Excel 2007. I have a cell with a dropdown box that has the values 1 thru 10. When I save the file (as an Excel 97-2003 compatible .xls file), it's 17kb which is normal. I want multiple dropdown boxes going down the same column, so that every time the user goes to the next row, another dropdown box will be displayed. I copied the cell with the dropdown box, selected the entire column, and pasted the dropdown box.
This time when I save the document, it's over 2MB in file size. I've seen other spreadsheets with several columns of dropdown boxes spanning thousands of rows and they stay under 30kb. I don't know what they did differently to keep their file size small. Why is my file size so large and how do I fix this? Do I need to use a 'paste special' function?
i always receive 200 mb file. which i has, around 10 sheets , with pivot tables and formulas.
i have to open this file update refresh and save as this file, which i am doing via vba.
however the challenge for me here is though i set xl calculation to manual at the begining and xl calculation to automatic at the end. Though i used this code, its taking close to 5 mins to complete this via Vba.
how or what is the alternate way to reduce.
I am trying to use excel tools to clean dirty data and compare the two cells. The information is there but tainted with additional information that is not relevant. I have tried to use Left/Right tools to capture alpha characters leading an address number with no real success. Also, when I get the data it seems to have some embedded breaks that I can't seem to get rid of that cause my tasks to error too.
View 4 Replies View RelatedOn this forum, a script is provided to break a large Excel file into smaller 500-line files:
Split Worksheet Into Multiple Files By Every Nth Row
I copied the code and pasted it into the VBA editor in Excel 2007, but when I run the macro, it generates an error message:
Runtime error 91: Object variable or With block variable not set.
The line the debugger identifies as the one with the error is this one:
For lLoop = 1 To rLastCell.Row Step 500
Here is the full code from the previous thread: ...
I have a large Excel 2007 file, around 60.000KB. 54.000KB are due to one of the worksheets where I have 8760rows x 160columns with data. The calculation time is not a problem, it is very fast, it only takes 2/3 seconds. The problem is when I open or save the file, it takes around 2 minutes... it is not too much, but it becomes too long when one has to open and save it several times. It there any trick to decrease the time when openning or saving an excel file??
View 3 Replies View RelatedI have a large file that takes a long time to close.
I would like to display a message that says " SAVING - PLEASE WAIT".
But I do NOT want any interaction from the user to continue so I can not use a MSGBOX.
How can I do this?