I've been using the following code to go the current date on a spreadsheet. I now have to add the current date somewhere else on the sheet How do I modify the following code to only have it look in A:A ? Date is formatted -- m/d/yyyy (1/2/2013)
HTML Code:
Sub gotodateday()
Dim C As Range
Set C = Cells.Find(Date)
If Not C Is Nothing Then C.Select
End Sub
If I name ranges as Months, (Example: January_13. -- I can use the month without the year if it makes a difference),. How would I change it to look for the current month in A:A.
It's working fine if the year is 2014 but not if the year is different.
Conditions:
If the date is today then only the month should display else blank. The year should be ignore.
For example:
08/01/2000: January 01/01/2000: blank cell 08/01/2014: January 01/01/2014: blank cell
The date is in column 'p' in dd mm yyyy format. In short if the date is current date that is for today '8' then only the month should be display in the output.
i have a table with a row of dates along the top. beneath each date is a value. the dates and values in these cells changes based on info in other sheets.
i need a way of finding the first date in the current month and returning the corresponding value.
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009 If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
Column A is "Customer Number" Column B is "Date Can Opened" Column C is "Month" (currently blank except header row) Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
I'm working on more code to take data from hotel reports, compile totals and transfer data to several other workbooks. In prior instances, I'd been working with data that had been converted from Adobe .pdf format, so while the cell values appeared to be dates, they actually were text. I'd come up with a solution to find the first of each month in a column of dates and insert a row at that point. However, I'm now working on this with a system that actually outputs in Excel format. As such, the date column is actually normal date serial value, rather than text and my code doesn't work. What can I do to modify this snippet of code to find the first of each month and insert a row when the values in the column are actual date serials?
Here's the current code:
With Sheets("Sheet1") For RowToInsert = .UsedRange.Rows.Count To 14 Step -1 If (Range("A" & RowToInsert) Like "*/01/*") Then Rows(RowToInsert).EntireRow.Insert If (Range("A" & RowToInsert) Like TodayVisualMatrix) Then Rows(RowToInsert).EntireRow.Insert Range("A" & RowToInsert).Value = "Subtotal" End If Next RowToInsert End With
Row 3 doesn't find anything because while they appear in that format, the value of the cell isn't */01/*....
Need a formula for counting the number of occurences of a month & year in a date column? The spreadsheet is looking at items raised in any given month e.g. all items raised in Dec-08.
I have two tabs in a workbook named "Dashboard and Medicine details"
I need my dashboard to show what are the medicines will expiry in next month.
My Medicine details tab contails medicine details along with its expiry date. If the expiry date of a medicine falls in next month, then it should be displayed in my dashboard.
See the sample attached will give you a clear objective.
I want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$A$2" Then
If Target = "January" Then ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _ xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range Columns AJ through AX Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have log data in two columns: Column A: Date/time (at 30 minute intervals) Column B: Numeric data
On the last row of each month, I’m trying to perform a SumProduct on the two columns and display that result in column C.
The end of the range is determined by the month in the current row.
I’m having difficulty finding the beginning of the range, though. I need to account for both the normal dynamic calendar days & the fact that I may get data starting mid-day and mid-month.
I have this formula, but I’m not sure how to make the first array dynamic or if this is even correct approach.
I have a range of dates from 2003 to 2012. I formatted them to the 'Mar-01' option, but when I want to pivot on the month, Excel still reads them as the date - example 3/25/2008, 3/28/2008...and so my pivot table has multiple columns for all of the dates present in that month.
How do I truly format my dates so that excel reads them as the month only so that I can then pivot and show 12 columns (months) per year?
I am working in a spreadsheet that contains a bunch of data, it is not limited, and varies. It has some fiels such as: name, date of birth, address, and others. I am interested in creating a column with only the month digit of the date of birth for each row.
I have been working with some code, I am not quite sure how to continue. The following table would be a example that I have of the data, it has only to entry in the column of Date of Birth, but my data range will always vary. I want to get the month and past it in the next cell that is available in this case would be column c or 3... The worksheet name is REP.
VB:
Dim Cell As Range ' 1st cell with the posting date Set Cell = Range("A2")
What do I have wrong with this? I want to find a cell that matches today's date and then start with that row by copying a time value in another worksheet to the one that has the dates already.
Sub PunchClock() 'This will copy the current time punched and place it into the correct cell Range("B3").Select
Do Until ActiveCell = Now() ActiveCell.Offset(1, 0).Select Loop
All I need is some direction with this. I tried setting up a variable then check that variable against the current date and I didn't have that one figured out either.
I have a report where I would like to have a macro search for a date string in columns N-S and copy the date to Column C, same row. The number of rows will vary from day to day. I would then like to format all of Column C to 'mm/dd/yyyy'.
Attached is a file where the date string is included in Column N on row 2 and Column O on the row 3. The dates for both these lines would need to be copied and pasted to their respective rows in Column C.
I want to find the most recent date in column D, when the variables in column E are all the same. There are many different variables in column E, and for each group of the same variables (eg. all cells containing "A"), I want to find which is most recently dated (dates are in column D). This is my code so far...
Sub adddiv() Dim ticker As Variant Dim freq As Long Dim csheet As Worksheet Set csheet = Worksheets("Sheet2")
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this:
Private Sub ProductRegistration_Click() [D4] = [D4] + 1 End Sub
On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.