I'm trying to have a Formula that I created in excel to be expressed through loop in VB.
Some parts of the Formula should remain constant, unchenged.
=IF(O2="","",VLOOKUP(Sheet1!A6,Sheet2!A1:O200,11,FALSE))
The parts of a code that are in red should remain unchanged though all 200 lines.
I only grasp the basics of loops and not any experience w/ formulas in VBA to date.
For each item in col "I" run this formula (the cell references are relative)
=RIGHT(I6,LEN(I6)-FIND(" ",I6))
I am only at this point so far:
Sub ItemName()
Dim wb As Workbook
Dim ws As Worksheet
Dim i As Integer
Dim LRow As Long
Set ws = Workbooks("TGSItemRecordCreatorMaster.xls").Worksheets("Record Creator")
LRow = ws.Cells(Rows.Count, 9).End(xlUp).Row
For i = 6 To LRow
=RIGHT(I6,LEN(I6)-FIND(" ",I6))
End Sub
The basic function of the loop is to Delete the first term of each cell in the range including the first space.
example:
Enjoi Barletta Deck
Resulting in:
Barletta Deck
I want to subtract one date from another to find out the total waiting time, and repeat this action for multiple rows.
I'm trying to use an R1C1 formula within all of this.
Dim TotalTimes As Long
Dim iTime As Integer
TotalTimes = Cells(Rows.Count, 4).End(xlUp).Row
For iTime = 1 To TotalTimes
Cells.Find("Waiting Time").Offset(iTime, 0).FormulaR1C1 = [R[iTime]C[-1]-R[iTime]C[-2]]
Image column A, starting at A2 to LASTROW of say 10, I have the LASTROW value stored in a variable.
Each cell in the range contains a file location/document name, example:
C:Documents and Settingsuser-idDesktopDOCSDoc01.xls < cell A2
this repeats for A3, A4, to A10, for each different document.
So starting at LASTROW + 3, I've created a new Header for Hyperlinks: and below that I want to create the 10 hyperlinks for each of the 10 documents above.
formula is =hyperlink(a2,a2) and then (a3,a3) and so on...
i have the following macro that loops through 100 tickers in sheet 1, gets the trades for each, pushes each ticker's trades to sheet 2 to create a list of all trades. The problem is that I just get a #N/A requesting data for each ticker. This seems to be a wider problem with fetching external data from Bloomberg. However, I cannot seem to get a fix for it.
Sub Macro()
On Error Resume Next
Sheet2.Range("B3:E65536").ClearContents
[code]....
I am trying to get the following thing started but my loop doesn't succeed. I've got 3 columns. I need to place a formula in column C if A is empty.
Example:
A2 contains data so do nothing.
A3 is empty do: C3=B3+B4.
A4 contains data so do nothing.
A5 contains data so do nothing.
A6 contains data so do nothing.
A7 is empty do: C7=B7+B8.
this is what I've got so far:
[Code] ..........
I keep getting errors with this vba code. I'm trying to make 10 new worksheets with the name of each worksheet in the Newname array. I'm trying to put the same formula (with the difference that each formula would take from a different "Newname" file. I'm trying to put first formula from A1 to A 560 and second formula from B1 to B 560.
Sub Namesheetformula()
For x = 1 to 10
Newname = Choose(x,"A","B","c","d","e","f","g","h","i","j")
Firstformula = if(isna(match('Master!'A1,'Newname'!A1:A560,0),"",'Master'!A1)
[Code] .....
LastRow = Worksheets("Sheet1").Cells(Rows.Count, "K").End(xlUp).Row
For i = 2 To LastRow
Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
If (Worksheets("Sheet1").Range("AE" & i).Value < 1.5) And _
((Worksheets("Sheet1").Range("K" & i).Value > 0) Or (Worksheets("Sheet1").Range("L" & i).Value > 0)) Then
Worksheets("Sheet1").Range("AE" & i).Font.Color = 255
End If
Next i
My loop here works just fine, and my Formula works in testing. However when I move my formula inside the loop I get an error.
Is the syntax wrong in this line = Worksheets("Sheet1").Formula = "=IFERROR(+IF(+K2=0,0,+R2/(+IF(+K2>L2,K2,L2)*$AE$1/365)/P2),0)"
I have a spreadsheet with 10,000 rows. In column A dates are mentioned and in column B I'd like to calculate the specific Quarter via VBA code as I can't have formula's in my sheet.
My VBA code is:
Sub QuarterCalc()
Dim myCell As Range
Application. ScreenUpdating = False
For Each myCell In ThisWorkbook.Sheets("Data").Range(Cells(1, 2), Cells(10000, 2))
myCell.Formula = "=INT((MONTH(RC[-1])-1)/3)+1"
myCell.Offset(0, 0) = myCell.Offset(0, 0).Value
Next
Application.ScreenUpdating = True
End Sub
trying to loop through an array, with each loop calculating a formula (VLOOKUP) for one cell based on the values of a cell in another sheet.
Not sure but I think it has something to do with looking up a text value while the loop returns a value.
Private Sub ExpandFormula()
'calculates Counttarget formula in COUNTTARGETS sheet across required range
Dim CellsDown As Long, CellsAcross As Integer
Dim i As Long, j As Integer
Dim TempArray() As String
Dim TheRange As Range
Dim CurrentValue As String
'get the dimensions
CellsDown = Worksheets("SEPARATE").Range("D9").Value
CellsAcross = Worksheets("SEPARATE").Range("E9").Value
'redimension temporary array
Redim TempArray(1 To CellsDown, 1 To CellsAcross) .....................
i am trying to do something along the lines of. a For Next Loop that selects the cell N6 and inserts the formula.
$K$7*F6+$L$7
then fill down to the cell N754
then selects O6 and inserts the formula
$K$8*F6+$L$8
then fill down to cell O754. repeating this until there are no more values in either the K or L column. in the attatched spreadsheet i have deleted the values from 50 something down to 754 but the idea is still the same.
so that each formula inserted keeps the cell from column K and L constant when filled down but F changes, then when the next column is used(ie. from column N to O), the next row in the K and L is used but F starts from F6 and changes as it is filled down again.
I use this code in Column M to convert Column N
Code:
=IF(LEN(N2)>
I am looking to loop down Column N & O and replace , insert colon for both column N and O I started with is code
Code:
Sub FixTimeFormat()
Dim TimeNumcol As Integer
Dim ConvertedTimeCol As Integer
[Code]....
I have a do while loop that runs until the reference cell is empty. This has been working but now I have changed the reference cells somewhat so that the cells contain a formula that returns nothing if a function returns 0 or an error. So the cell has no value but it does have a formula in it. The do while loop keeps running because it thinks that the cell has something it it.
Do While Cells(i, 2) ""
Is there something else that i can put for "" to get the loop to stop when cell contains no value but a formula.
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
Trying to look for formula for searching through Range and search through Data to achieve expected res
Data Output ExpectedRange
Pune 123 is city Pune 123 Mumbai 999
Maharashtra 345 is state Maharashtra 345Pune 123
India 678 is Country India 678 Nagpur 666
Maharashtra 666 is state OthersPune 555
Below is the query i used for manual search however need formula to see through Range and achieve output expected
=IF(ISNUMBER(SEARCH("Pune 123",A5)),C5,
IF(ISNUMBER(SEARCH("Maharashtra 345",A6)),C6,
IF(ISNUMBER(SEARCH("India 678",A7)),C7,"Others")))
Make a loop where I can increment the row number and execute the command where I set the formula?
View 1 Replies View RelatedI'm working on a spreadsheet to compile and print checks. All the check information except the date and first check number is contained in a Wins sheet. I also have a Checks sheet which contains a master check. I used text boxes on the master check to contain individual check information. Each text box is filled in from the Wins sheet by means of formulas. The problem I'm having is how to modify the formula entries in the following code to cycle or loop through all checks required. A sample spreadsheet is attached.
View 2 Replies View RelatedI wanted to know if there is any way possible to get vba to insert a formula in a cell to each worksheet in each workbook in a folder and then using loop to extract all the info from each worksheet of each workbook in same folder into a master workbook?
View 1 Replies View RelatedI looking for a macro that will go through multiple sheets & change specific cells to values if the column header is = to value set in specific cell.
for example
I would like the macro to look at row 3 in each tab (page 1, page 2, page 3) and if the value you is equal to X (parameter input on different sheet) then change the formula to a value in row 6 & row 12 of that column.
I'm attaching an simple example that i looking for this on. The green cells are the one i would like to change to a value.
Book1.xlsx
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I have a code that inserts a new column after every 7th column. I want to include a formula where every 7th column value is subtracted from the values present in the column before the 1st, or you can think of it as subtracting 7th column of the present group from the 7th column of the previous group. Example: The range of my data starts from col F, then
F (7th) New Column (G) H (1st) I (2nd) J (3rd) K (4th) L (5th) M (6th) N (7th) New Column (O) P (1st) Q (2nd) R (3rd)
So, New Column (O) = N - F
and the next New Column (W) = V-N ...
NOTE: Column G can be ignored.
I want to add a looping function to this so that it will continue to subtract for the other respective columns as well. How do I incorporate this into the following code?
[Code].....
I'm using Excel 2013.
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
i have a problem with a nested loop:
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================
Sub new2()
Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant
r = 1 ..................
I have built a summary page in a multi-sheet workbook, this summary page extracts data from each respective sheet and enters it into successive rows. Each row contains data variables that are mined from each spreadsheet, there are multiple columns and multiple rows (one row per spreadsheet).
I've used a sort of 'header' format for each individual spreadsheet (account sheet) in which I use complicated formulas to data mine standard data sets below the header.
I've done this because I discovered I do not understand how to use this for-loop to run an active formula in each sheet and then output the unique result, THEN continue on to mine the next sheet. I have however successfully been able to grab a data value from a complicated formula and copy paste special values.
I use a For-Loop which creates the summary rows in a different sheet called 'Market'.
My problem is that I would like to actually use a formula in my For-Loop and not just reference a static value from the referenced sheet. The simplified code is below, with my error highlighted in red.