I think I have this wrong. I am using the below listed formula to count the number od dates in a column that are older than 30 days. It comes up "0" even if I enter an old date in the cells in the column.
Should I be using a different formula?
=COUNTIF('DATA SHEET'!B3:B20000,"< TODAY()-30)")
I have been using a formula to count the number of days between 2 dates and if the date was older than 12 months it would work fine.
The data that i was using has been changed and they have decided to change the format of the dates and dropped the year reference no all i have to work with is dates like 27-07 this represents 27th July i can format this date to work fine unless the date falls before 1 jan this year all i get is lots of numbers and it stuffs up the whole calculation.
The formula i am using to compare the dates is
=DATEDIF(N31,$D$1,"d")
I am using this formula to count the number of times “closed” appears between
particular dates:
=SUMPRODUCT(--($B$1:$B$23=F1)*($C$1:$C$23="Closed")*($A$1:$A$23>=$I$2)*($A$1:$A$23<=$J$2))
I have tried applying the same logic to another formula where I wanted to
Also count the number of times “Not Stated” and “In Progress” are shown.
However when I do I am receiving a ‘0’ number in return. The formula I wrote
was:
=SUMPRODUCT(--(CS_Ticket_Report_Dump!D$1:D$50000=C6)*
(CS_Ticket_Report_Dump!G$1:G$50000="Closed")*
(CS_Ticket_Report_Dump!G$1:G$50000="In Progress")*
(CS_Ticket_Report_Dump!G$1:G$50000="Not Started")*
(CS_Ticket_Report_Dump!A$1:A$50000>=AN$1)*
(CS_Ticket_Report_Dump!A$1:A$50000<=AO$1))
I have a problem again with one of Date Dif function " =DATEDIF(I5|J5|"m") " in attached file i have this function applied to calculate number of months in between two given dates but it seems this function is not working properly or i am missing some info in this to make it run properly. How to fix this function or give me a proper one which can solve my problem to calculate accurate months between these dates in attached file...
Excel Date problem.xlsx
I have a question, does anyone now how to count between dates, for exemple :
01-02-2009
15-02-2009
22-02-2009
25-02-2009
03-03-2009
11-03-2009
And i wont only to count between 01-02-2009 / 28-02-2009, the result it will be 4.
i have first date in cell a1 and second date in cell b1. I want formula to to how many months are in between these two dates,, for example
first date: 1 jan 12
swcond date: 5 apr 12
result: 4
Need a formula (E1) to determine the number of days that have passed between two given dates (C1 & D1) ONLY when the Status of a given report (B1) is "Late"
B1 = Status (Pending; On Hold; Late; Completed) (i.e "LATE")
C1 = Status Date (i.e. 28 Mar 14)
D1 = Deadline (date) (i.e. 25 Mar 14)
E1 = Total Days Late (= ?)
Note: I'm using Office for Mac 2011
I have a range of dates. i would like to count the number of days that are earlier than the date =TODAY().
Do i use the COUNTIF function?
Count people per their classification between two dates. Spreadsheet attached.
The answer I need to show in column (S) is:
Cell (S4) = 1 (supervisor)
Cell (S24) = 1 (fitter)
Cell (S36) = 3 (rigger)
j906 count.xlsx
I need to count the actual number of days between 2 dates but excluding Sunday...
For example,
Start Date-----End Date-------# of Days
01/Jan/14-----23/Jan/14-------20 days (excluding Sunday)
In some cases, Holiday also to be removed i.e. 01-Jan-2014 is holiday, then the # of days should be 19 days.
If I use Networkdays formula, then system results excluding both Saturday and Sunday. But I want to remove only Sunday.
I did a search in google and found this formula that's supposed to work:
(Please see the following)
To count dates within a range (inclusive):
B1 = start date = 1/1/2006
C1 = end date = 7/1/2006
=COUNTIF(A1:A10,">="&B1)-COUNTIF(A1:A10,">"&C1)
Then it should be:
=COUNTIF(A1:A10,">="&1/1/2006)-COUNTIF(A1:A10,">"&7/1/2006)
But this only counts the number of cells that has the date, but not based on the range, why it doesn't work?
I need to figure out how to tell Excel to count the number of invoices on a worksheet older than 30 days and display that number in my Summary worksheet. Here's a quick example:
Worksheet '1234' has 10 invoices, 6 of which are more than 30 days old (invoice dates are in column B). Worksheet 'Summary' needs to display the total number of invoices and the number older than 30 days.
I have a range of dates B1:B100 which I want to compare to a certain date A1 and see how many are greater than my stated date A1.
I've tried with countif(B1:B100, "=>A1") which I thought would work, but it gives the error Value!
How do I do this?
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedI have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
I have attached a small copy of the worksheet.
I need to count when the following set of 3 criteria criteria are met:
1: The Assessor Initials = DS
2: the month = Mar
3: Check 4 Ranges = columns I, K, M, O
I've tried using sumproduct (sucessful for other data) but not able to get it to work with dates.
Needed count formula incombination with dates. I need to count the total of names in a colum, but I need to count them for a set period.
View 9 Replies View RelatedIs there a formula that can count based on dates?
Here's the scoop.
I created a spreadsheet which I would like for it to track trainings based on days, I added an =COUNTA(A1:A100) formula which counts the amount of people trained but what happens is that it counts people trained all week long. I want it to be able to differentiate days and display the amount of people trained per day , Ex. 4 on Mon, 5 of Tue , 6 on Wed, etc
in writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
I am currently using this formula to count dates between 2 date periods If specific condition exists.
=COUNTIFS(
Data!S1:S100000,"*KP*",
Data!X1:X100000,">=10/1/2010",
Data!X1:X100000,"=10/1/2010",
Data!X1:X100000,"
I have a Training Matrix with "Main", "Leavers" and "Reports" sheets. (can email it but can't upload it here; it's 534kb and I can't make it smaller)
In the "Reports" sheet I need to fill "Site Procedural Training" - "Number of people trained in period".
The periods are :
25/12/11 - 31/03/12
01/04/12 - 30/06/12
01/07/12 - 29/09/12
30/09/12 - 29/12/12
The source of data will be the "Main" and "Leavers". The data are dates in these sheets; each date = 1
The formula needs to look in to "Main" and "Leavers" and if it finds a date which fits in the required period in "Reports" then return it as 1. If it finds 300 dates then returns 300.
I have two date columns, a start date and end date. Another columns tells me the number of days between these two columns. It may return 45 days which actually straddle 3 different months.
My aim is to identify between this date range how many days in Apr 14. Then in the next column howmany days in May 14 etc
So on the spreadsheet Id have 12 columns for each month of the year. in Apr 14 for each row between the given date range I want it to tell me how many days are actually in April. Id then copy that formula into the May 14 column.
Is there a formula to count the number of Saturdays between (and including) dates in A2 and B2
View 3 Replies View RelatedI need a formula to count the number of times the same thing occurs in a particular column. i.e. tree 1, tree 2, tree 3. I just tried the countif function and it is returning "0". Not sure if that's because the data I am looking for is part number/part text. Does this make a difference? There are also spaces between the number and the text. Also, the range I am asking excel to look in is based on a concatenate formula.
View 4 Replies View RelatedI want to create a formula that works out the number of days between two dates but excludes weekends?
View 3 Replies View RelatedI'm trying to calculate the number of days between dates in column A and B. I've looked at the examples in this site and thought I used the formula correctly, but the cell returns an error message when I type: =DATEDIF(A1,B1,"D")
View 7 Replies View RelatedI need to formula to count the number of cells that meet the criteria below,
Find the letters 'AT' in some part of the cell and a blank cell next to it...
Doing a different formula for each, doesn't bring out the correct figure.
I'm not sure if using the Dcount formula is the right one in my example below, but I can't get it to work. Here is my data:
A
B
C
D
E
F
G
H
1
ThrFriSatSunMon TueWedThr2
2030101512
I'm looking for a formula that would count the number of Weekdays with data in it. So the answer would be 3. As I enter data into column F, G, H, etc. the count would go up and would always skip "Sat" and "Sun".
I have this array formula
=IF(ROWS(A$11:A13)1,IF(MSB!$A13"",SMALL(ROW(Table1[APP DATE])-ROW(MSB!$A$11)+1,ROWS(A$11:A13)),""))))
the problem is that when both if statements are true i want it to get the row number, this is because table1 has blank rows (can not be avoided as the data is linked from a closed workbook)
i can see this works up until it meets the first blank row and i get #value error.
on table1 data exists on row 1,2,5 and 8 so my problem is getting the small function k to report these numbers?
I have the following list
Column A Column B
Name of Parts Amount
A 4500
B 5500
C 8000
D 12000
E 4300
F 28000
G 1000
H 7000
I 10000
J 5000
K 11000
Total No. 11
I want the result as follow.
Slab No. of Counts
0 to 5000 4
5001 to 10000 4
10001 and Above 3
Total 11
