I need a formula which can calculate row 60 for blank cell. If true then apply another condition which checks whether or not the cell above the row 60 up-til row 50 has any bold fonts or not. If true then show True and if false, show False in cell J1.
View 1 RepliesI neeed to perform a calculation on some cells but one of my cells in the calculation may contain "".
The cell in question is $H6. Sometimes there will be a value, other times "" but it throws an error when it's got "".
Coumn H has this formula
Code:
=IF(NOT(ISBLANK('Internal Data'!G2)),'Internal Data'!G2,"")
And this is the formula that throws an error
Code:
=IF(AND(L$5>=$H6,L$5L$5,$AC$3,""),"")
and the error message
A value in the formula is of the wrong data type
I would like to be able to round off the decimals resulted in the POV field on my worksheet and have a running total of the entries listed below. This occurs sometimes when the mileage units have decimals. In this example, the POV values display $1.00, 99 cents, and 93 cents. Their resulting total should be 2.92, but Excel calculates them as $2.93 due to the additional decimals.
The problem is that if I apply an =ROUND function to the formula in the POV field, while it will display a correct answer if all the date and mileage fields are filled in for which the formula has been applied, it will not give a running total in instances where there are empty date/mileage fields, reporting "VALUE!". Is there a way to force Excel to display the running total?
I have attached the worksheet, with the example above entered in. I have included the formula I've been trying to fix on my worksheet on the bottom as well.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
i need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
View 3 Replies View RelatedI have a file wiht 2 sheets, on one sheet I have a macro that opens 25 other excel files and pastes information into the sheet in a specific order. Then on the "main" page I have different calculations based on the information from the other sheet.
The Information is listed in a row so for example B2:M2 or B3:M3. If a value has not been assigned the vcell will be empty (No formula or anything, completely empty)
The Value in the cells will be between 0 and 100 (its a score from 0-100) so in the "main" page I want a formula that calulates the LATEST score (It will always be the first one on the furthest left and the latest one to the furthest right). Is there any easy formula to calculate this?
For example:
----B-----C-----D-----E-----F-----G-----H-----I-----J-----K-----L-----M
2|-10----30----75----85----93----12---12
So in the example I2:M2 is empty so the latest score would be H2 so thats the value I want to show on the main page.
i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working.
=MIN(B2:B(G2-G3))
basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
Is it possible to use a formula to calculate a cell reference within a formula? e.g. is there some way I could reference cell C47 in a formula by saying C(40+A2) where A2 contains the value 7. I often want to sum a certain number of cells in a list, from the first one to the nth one and need to be able to calculate rather than hard-code n.
View 5 Replies View RelatedI have a row of data starting in cell E4 that could, theoretically, go to the far right end of the spreadsheet. I need to enter a formula in cell D4 that calculates the average of every other cell in this row, starting with E4, that is E4,G4,I4,K4...
View 9 Replies View RelatedOk, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I only want the formula to operate when there are values to calculate and then ONLY refer back to the last calculation. If there are gaps between the calculations I would like those to remain blank. Is that possible?
I have attached an example of what I am trying to do.
I have a spreadsheet which projects the amount of work on hand each week. It runs up to the end of the year and shows the estimated figures and then each week I input the actual figures. The way it works at the moment is that it looks at the estimated work on hand, adds the work on which has been received and then takes off the work that has been cleared...this then gives an estimated level of on hand work.
What I want it to do is to look at the cell which would show the actual work on hand and if thats empty then go on to look at the estimated work on hand. In other words - I want a formula that looks at a cell to see if there's a figure in it and if not uses another cell instead. I have tried: =If(u5=0,r5+y5-z5)
but when I input a figure into U5 it inputs FALSE into the cell. I don't want it to do that, I want it to look in cell U5 and if there's something there then do U5+Y5-Z5.....and if U5 is empty then do R5+Y5-Z5
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
I have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies View RelatedI have a spreadsheet which imports data from worksheets week 1, 2 etc to a monthly summary.
Is there any way I can show a cell as blank if the return equals 0?
I'm sure the resolution is probably simple but then so am I.
Probably a simple method that i have not tried. I have a table where some cells are populated with #N/A. I am trying to work out a formula in another cell saying if the cell that contains #N/A then leave this cell blank.
View 4 Replies View RelatedOn my spreadsheet i have 4 columns which are in currency format. The 5th column (total) adds the 4 up which currently looks like this - =SUM(BG44:BG45) this shows £0.00 in the 5th column.
What i need is a formula in the 5th column (total) so that when it adds up the 4 previous columns if the sum = £0.00 then the total column should show a blank cell.
I am looking for a formula that will work with my current formula, and check that cells a1 and b1 contains information. If they do contain info then the original formula should carry on as usual and leave the answer in cell c1. I also need it so when no information has been entered in cells A1 and B1, C1 will be blank instead of containing a zero.
This is the formula I have at the moment:
=IF(SUM(A1=0,B1>0),B1-A1,"No Charge?")
A B C
10.1810.82
I am getting 0 or 12:00 AM when I format cell as time and put formula.
I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11).
G4 = todays date
E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value
Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
I'm using the following formula, and keep getting a zero when the cells in D4 are blank when I simply want exactly whatever is in D4 to be shown...
=IF($B$2="Alness",Alness!D4,IF($B$2="Amsterdam",Amsterdam!D4,IF($B$2
="Atlanta",Atlanta!D4,IF($B$2="Budapest",Budapest!D4,IF($B$2
="Dalian",Dalian!D4,IF($B$2="Debrecen",Debrecen!D4,IF($B$2
="Durban",Durban!D4,IF($B$2="Edinburgh",Edinburgh!D4,IF($B$2
[Code] ..........
I have a column of imported data like this, with scattered blank cells:
Rd Frnt200634350464300399636350
I am doing a multiple regression where the above are independent variables. I usually have hundreds of variables in a column like this. Because each cell must have a value in it (the regression won't accept blanks), rather than manually fill the blank cells with a 0, I set up an adjacent column to convert the blanks to a 0 and regress off that column. But every formula I try still produces a blank in that adjacent column. I have tried things like: =IF(A1="",0,A1) but they do not work. I always get a blank in the adjacent column when the original cell is blank. Can't get a 0 in there.
How can I add:
IF statement within this formula =IF(ISERROR(LEFT(E1,FIND("x",E1)-1)="0"),"Special",(LEFT(E1,FIND("x",E1)-1)))
To drop out if E1 is blank
Say the formula is in F1 cell and it is checking E1 and E1 is blank, F1 would be blank.
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart.
My problem is that that excel dont recognise the "" as a blank cell in my chart.
Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
I have the following scenario on the attached worksheet: I need b45 to say 0% if b42 and b43 are left blank.
View 3 Replies View RelatedWhen I enter this formula I get a #VALUE! error. I think it's because cell AG46 has an IF formula that results in "blank" if 0. How do I fix this error so that it includes cell AG46 and if cell AG46 is blank it counts it as a zero?
=SUM(A12)-(AG46*8)(=40 is the answer I'm looking for)
=SUM(40)-(0*8)
If it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this?
This is the forumal I am currently using
=VLOOKUP(A26,Subs!A:F,5,0)
I have also tried this one as well
=IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))