Formula To Calculate What Cell In Range Has Value Over 0
Dec 5, 2013
I have a file wiht 2 sheets, on one sheet I have a macro that opens 25 other excel files and pastes information into the sheet in a specific order. Then on the "main" page I have different calculations based on the information from the other sheet.
The Information is listed in a row so for example B2:M2 or B3:M3. If a value has not been assigned the vcell will be empty (No formula or anything, completely empty)
The Value in the cells will be between 0 and 100 (its a score from 0-100) so in the "main" page I want a formula that calulates the LATEST score (It will always be the first one on the furthest left and the latest one to the furthest right). Is there any easy formula to calculate this?
I have a range of values that are not a constant length. I want a macro that will calculate the range and fill with a formula using the new range. In this example, I need a formula to look at the values in range f464:f471 and calculate the number of values greater than $1000. Column B is a salesman identifier. I can do this manually, but it takes me about 1/2 hour to complete. At every change in "B", I need to place this formula in the open, blank cell in "E" such as highlighted below.
week39
ABCDEF45939SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046039SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046139SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046239SCHTERR-WIEDEMANNDCCDIST-MUSCHANY0463 SCH Total 14042.2146439SCITERR-SULLIVANDCCDIST-MUSCHANY15587.1546539SCITERR-SULLIVANDCCDIST-MUSCHANY7217.2246639SCITERR-SULLIVANDCCDIST-MUSCHANY5316.6246739SCITERR-SULLIVANDCCDIST-MUSCHANY2720.6946839SCITERR-SULLIVANDCCDIST-MUSCHANY520.446939SCITERR-SULLIVANDCCDIST-MUSCHANY195.7147039SCITERR-SULLIVANDCCDIST-MUSCHANY047139SCITERR-SULLIVANDCCDIST-MUSCHANY0472 SCI Total 31557.7947339SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY4190.7147439SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3219.7647539SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3187.147639SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2209.3747739SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2132.7547839SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2034.56 Spreadsheet FormulasCellFormulaF463=SUBTOTAL(9,F435:F462)F472=SUBTOTAL(9,F464:F471)
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I have a Training Matrix with "Main", "Leavers" and "Reports" sheets. (can email it but can't upload it here; it's 534kb and I can't make it smaller)
In the "Reports" sheet I need to fill "Site Procedural Training" - "Number of people trained in period".
The periods are : 25/12/11 - 31/03/12 01/04/12 - 30/06/12 01/07/12 - 29/09/12 30/09/12 - 29/12/12
The source of data will be the "Main" and "Leavers". The data are dates in these sheets; each date = 1
The formula needs to look in to "Main" and "Leavers" and if it finds a date which fits in the required period in "Reports" then return it as 1. If it finds 300 dates then returns 300.
I'm looking for a formula, which says if a number is within a range, perform a calculation. I have a table of ranges (0-6000,6001-10000,10000-12000, and so on). My formula looks at the current month cumulative balance, and inserts the value into the line of the range it falls into. However, the formula now contains lots of nested "IF" statements, due to the number of ranges I have. Also, if my cummulative balance is 6005 for example, but was 5005 in the previous month, I would like to see 95 in the 0-6000 row, and 5 in the 6000-10000 row. I making a complete nonsense of trying to explain myself, so I'll attach a quick example of what I'd like to see.
How can I shift the range of cells I want to calculate an average from? For example I want to get the average of cells A1 to A10, so =AVERAGE(A1:A10) And next I want to get the average of cells A11 to A20, so =AVERAGE(A11:A20). But I don't want to manually change the data or delete rows all the time.Is it possible to do something like: =average(A1+10:A10+10)??
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc) Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6) =AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
i need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
Is it possible to use a formula to calculate a cell reference within a formula? e.g. is there some way I could reference cell C47 in a formula by saying C(40+A2) where A2 contains the value 7. I often want to sum a certain number of cells in a list, from the first one to the nth one and need to be able to calculate rather than hard-code n.
I have a row of data starting in cell E4 that could, theoretically, go to the far right end of the spreadsheet. I need to enter a formula in cell D4 that calculates the average of every other cell in this row, starting with E4, that is E4,G4,I4,K4...
I need a formula which can calculate row 60 for blank cell. If true then apply another condition which checks whether or not the cell above the row 60 up-til row 50 has any bold fonts or not. If true then show True and if false, show False in cell J1.
I'm trying to apply the code for accumulating value in a single cell to a range of cells.
I want to use the code found in this thread [URL] ..... but, it only lets me edit "B1" to another single cell. I need my cells G4 to G469 to operate the same way.
How to edit the code so I can include a range or show me a version of the code where I can enter my desired range?
I can't seem to make SumIF or Vlookup do what I want here.
I have a table like that below. I also have a cell on the same sheet called CurrentPeriod in which a user can enter a period number corresponding with one of the values in the first column.
If someone enters 3 in "CurrentPeriod" I want to sum the first three values in the "Actual" column and then divide the result by the sum of the first three values in the "Target" column (effectively giving a percentage of target at the end of period 3)
I only want the formula to operate when there are values to calculate and then ONLY refer back to the last calculation. If there are gaps between the calculations I would like those to remain blank. Is that possible? I have attached an example of what I am trying to do.
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
I have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
I have a range of names (say A1:A10) and another range (J1:J3) which contains text strings such as "og", "alle", "ins".
What I need to do is to check each of the names in A1:A10 to see if the cell contains any of the values in J1:J3 (an "exclusion list").
For example:
A1 contains the name John Smith, so I'd need to return a value of false as none of the text strings in J1:J3 is contained in that name. But A2 contains the name Elizabeth Allen, so I'd need to return a value of true as that name contains the text string "alle" which is in the range J1:J3.
I could do three different checks using the formula =SEARCH(J1,A1), =SEARCH(J2,A1),, =SEARCH(J3,A1) and then copy those three formulas down A1:AA10. If I only had three exclusions to check on my actual data that's what I'd do, but my real-life exclusion list contains over 50 different values, and it's a bit time consuming to create 50 different search formulas!
I'm using the code below to create sheets and copy pertinent data for each value found in column O on my data sheet.
Code: Sub CreateSheets() Dim WBO As Workbook Dim ThisWS
[Code]....
What I'm now trying to do, is apply a formula for each cell, in columns C:N for each newly created sheet. The formula is 'The value of 100 minus the value of the cell'.
I've tried adding
Code: cell.Value = 100 - cell.Value to differing points of the script but I recieve a 'Type mismatch error.
how to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
my "value1" needs to equal the value in the corresponding row for the formula. For example: B6 = "BEA" B7 = "GE" B8 = "TAS" My formula only gets cell B6 value and doesn't pick up B7 or B8 as the formula copies from G6:AD12
I want to be able to do is to have a text value in a cell which will be the same as a named range and can be called from a formula in another cell. For example, I have three named ranges: JAN, FEB and MAR. Instead of having a formula which might read: =VLOOKUP("bill", JAN, 1, 1)
I would like to have in cell A1 the text value "JAN" so that the formula can read: =VLOOKUP("bill", A1, 1, 1)
Then I can change which named range is used in the formula but changing the value in cell A1. When I try to do this, the formula just looks up the value as if cell A1 was the range rather than taking the value from A1 as the named range.
What I would like to do is add to this code. I would like to add the following formula to the cell at the end of that pasted row. =VLOOKUP(Range,LeaveIndicator,6,FALSE). In this case the Range needs to be Row D and the last row of sheet3.
