If I minus H is less that 90 count as 1. But if I minus H is greater than 90 count as one but highlight the row on the speadsheet in yellow.
What I am doing is I have a list of about 3000 entrys and I need to determine if (I minus H is greater or less than 90). I then need to count how many times out of the 3000 entrys each entry is greater or less than 90 and highlight the entrys in yellow that are greater than 90.
It would be ideal to determine the difference between I minus H and then categorize the findings of the 3000 entrys to see how many were say 59 and how many were 47 and how many were 92 etc.
I have never seen a forumla highlight a entry based on count if. I am currently rapidly searching the forums here but to no avail.
I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit Sub RemoveBH() Application.ScreenUpdating = False Dim intcount As Long For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
Is it possible to count the entries into a cell? Example cell A1 (=5+5+5) this would total 15 but could it count that there were 3 entries? Is it possible to do it both postive and negative. Cell A1 (5+5-1) this would total 9 but it would count 2 if you want negative entries subtracted. or it could count 3 if you wanted all entries. I think this would be two different formulas.
An image is here: 12.23.2013-13.59.36 - joezeppy's library
I want to create a table that lists the number of entries for each cell in column a and then lists the entry next to it. Can I use a pivot table or something?
i'm trying to get a column to count all blanks but only if there's and entry in the cell to the left. for example i have a list of names which is picked up from my main database in column a, then in column b there's dates, non applicables and blanks. however the columns are longer than the list of names to allow for growth, so there's a lot of blanks at the bottom which i don't want to count. so is there a way to count only the blanks in column b if there's a name in column a alongside it
I have a range of data going accross columns, the entries include, U, T, and F1 to F11. I have a requirement to count how many of a particular type of entry there are, this needs to be done in groups, e.g, counting attendance bonuses which are included in entries, F5,F6, F8 and F11, (i.e. in one cell i need to total how many F5's,6's,8's & 11's are in that row?!). i just cant quite seem to get the formula right to count them.
I am trying to teach myself something new, say I have a list of numbers in two rows and I want to count the numbers and have it tell me if there are duplicates and highlight the duplicates. I got the part about getting Excel to tell me if there are duplicates but I can not seem to figure out the conditional formating part. I uploaded a sheet.
The solution can be either in VBA or conditional formatting, if possible.I have product names on column A and weeks as from column B where I have the quantity sold. So, every week I'll have an additional column.
A B C D E ... Product Week1 Week2 Week3 Week4...
What I need:
If the cell is filled, highlight it in green.
If the gap (empty cells) between weeks is =1, highlight it in yellow
If the gap (empty cells) between weeks is >1 but <2, highlight it in orange
If the gap (empty cells) between weeks is >2, highlight it in red
The attached example better illustrates the needs : Example.xlsx
I have some 82,875 rows of data in column A is a string, in column B is a timestamp sorted in order.
I would like to run a macro that counts the first 80 of the same timestamp and highlights the remainder, doing this for every timestamp.
The timestamp is in the following format; Feb 16 15:33:02 +0000 2014
So for example you would take the first 80 with this timestamp and highlight the rest with that timestamp, and do the same for all other unique timestamps.
I need a formula showing that if a number is less than say 1.25 then it rounds down to 1.0 and if its between 1.25 and 1.75 then it rounds to 1.5 and then if greater than 1.75 then it rounds up to 2. I need it to work for all numbers not just 1.
I have a worksheet I use at work that calculates volume proccesed hourly, and also shows a running total as you enter hourly figures into the table, my question is can you hide everything in the result cell until the figures for each hour are entered ? currently all the result cells have irrelevant numbers in them until you enter the hours figure and the formulas do there thing, I could relly do with them being blank until the relevant hours information is input?
I am trying to do is use a combination of IF and SEARCH forumlas to return a result based on a choice of constants available to the user. Issue 1: IF Function to determine which worksheet to SEARCH What I would like to add to this is if one of the 3rd criteria (Amount) is under a certain number then the results are derived from the 'Staff' worksheet'. (This is stage I have gotten to so far). However, if the criteria is above a certain number then the results are derived from the 'Executive' worksheet. This is the part I'm so far unable to do.
Issue 2: SEARCH function returning the column per the user's selection on 'Matrix' page In addition, criteria 2 (Type) can be selected which corresponds to a column in the Staff and Executive worksheets. So far I have been unable to get the correct search results to post in the Matrix page. What I mean by this is that currently it is set to Type1 only. I have tried using an IF function in cell G8 and include this in the formula, however, the forumla returns the contents of G8 in the cell instead.
Issue 3: SEARCH results are post in an accending order. At this stage I have only been able to work how how to do this by using an AUto Filter on the Staff and Executive pages and sorting accending that way. Going forward as updates are made to the staff and executive pages I would prefer that this manual task was not required. Instead, the formula used returns the search in accending order.
I want to fill this formula down so that the summing occurs all the way down the collumn. However when I fill it down, it just copys the first two forumlas, rather than make the formula correspond to the row.
In the hours column usually the entries consist of numbers and everything works fine. However when an employee is on holiday they are still paid.
What I want to do is be able to enter the letter "H" for one of the entries in the hours column. The sheet to translate this as 2 hours.
H=2 x rate of pay = total
I cannot for the life of me get the correct formula to in order to achieve this. I don't particularly want to use a macro for this and others have suggested the "COUNTIF" function.
I have two dates lets call them cells A1 and A2. I then have another cell that caluclates the difference in these dates into a simple number (ie not another date) - A3. I need one of two things.
Ideally I want the whole cell (A3) to appear as a Green (fill) cell if the value is below 5, appear Orange if beween 6 and 9 and appear as red if its 10 or over.
I do not know if you can colour a cell that has a formula in already. So what follows is my current 'work around', which, if you can not colour the A3 cell, then I would need this cell coloured (A4). =IF(D12>7,"Urgent Attention",IF(D12<5,"New",""))
I have a worksheet with pricing & part numbers on sheet1. I put a formula on sheet2 that puts the lowest price in colum C of sheet2. Now I need to also get the part number from the cell before. So if the lowest price is in cell E3 I need to also get the part number in D3, and put it in B3.
I have a workbook that uses several indentification fields one for Job ID, One as a subID which occurs for every part of a job, i am currently using formula
In cell b2 I have a formula =text(today(),"yyyy") which daisplays todays date as a year, in cell b3 I have =text(today(),"mmmm") which displays todays date current month.
I have a column of Months and Years
January 2014 February 2014 etc
I need todays (current) month and year to indicate in a helper column next to the relevent month and year as a number 1 to use as a reference to return date from the row where the 1 is displayed, I have tried =if(and(b2=a10,b3=b10),1,"")) and it dosent like the fact that the year in the colmuns is entered as standard text, is there any whay to do this?
i have the following formula which counts various cells containing dates and i need to add in a count for 1 cell, BV21 but it needs to count 3 if theres a date and 0 if the cell is empty or reads NA
dont know if this can be done using a formula rather than VBA...but is there a formula that would change the countif range based on another cell entry. so the formula below has a column range of 2...so the other cell entry would be '2'.
=COUNTIF(B1:C1,"=Y"). If i then changed the cell entry to '4' the formula would change to. =COUNTIF(B1:E1,"=Y")
I have to make eighty to ninety entries daily in Column B. Then transfer these entries to another column N,(by copy/paste) after that a maco "text to column" is executed. Now I have linked Column B to N like =B2, =B3, etc. etc. thus instead of copy/paste, the data when entered in Column B, is automatically going to Column N. I wish that the macro (text to entry) may be executed by each entry made in Column B. Is it possible with a macro?
I will try putting the Code Tags in correct this time, I think I figured out what I have been doing wrong.
This code will allow one cell to make a sound when a condition is met. I am trying to have each cell stand on its own. Example cell A1 would sound a Ding if the number >100 and cell A2 would sound a Tada if the word Cat would be returned ....
