Count Entries Only If Theres An Entry In The Cell To The Left
Sep 21, 2008
i'm trying to get a column to count all blanks but only if there's and entry in the cell to the left. for example i have a list of names which is picked up from my main database in column a, then in column b there's dates, non applicables and blanks. however the columns are longer than the list of names to allow for growth, so there's a lot of blanks at the bottom which i don't want to count. so is there a way to count only the blanks in column b if there's a name in column a alongside it
i have managed to pull together some code that will deny people adding data into cells if they have 5 of the same entry. the entries are entered in a range and are matched against a single cell outside of the range. heres the
Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim greycell As Range, i As Long If Not Intersect(Target, Me.[grey]) Is Nothing Then Application.EnableEvents = False For Each greycell In Target If WorksheetFunction. CountIf(Me.[grey], greycell.Value) > 5 Then i = greycell.Interior.ColorIndex greycell.Interior.ColorIndex = 3 'red greycell.Select MsgBox "no cell entry past 5", vbCritical, "ERROR" greycell.ClearContents: greycell.Interior.ColorIndex = i End If Next Application.EnableEvents = True End If End Sub
what i need with is adapting this code to match two ranges as i cant use the worksheet_change event twice. i need it to be as if they were seperate events but are merged together. eg:.............
Im looking to count fields in column G, where the first 4 letters of column G do not begin with the letters "free", I came up with the following formula which doesn't work at all!!
Im also looking to do the same but with a sumif to perform the sum on a different column of data, but with the criteria LEFT(G15:G164, 4) & "" & "free") - (not sure if this bit is right either) staying the same.
Is it possible to count the entries into a cell? Example cell A1 (=5+5+5) this would total 15 but could it count that there were 3 entries? Is it possible to do it both postive and negative. Cell A1 (5+5-1) this would total 9 but it would count 2 if you want negative entries subtracted. or it could count 3 if you wanted all entries. I think this would be two different formulas.
I have a cell with a formula in it. I want to use conditional formatting on this cell if the formula result leaves it blank. Given the formula is in the cell it's never recognised as blank. If an entry is input instead the formula then obviously I don't want the conditional formatting.
What formula can I use in the conditional formatting for it to recognise the Cell formula as blank?
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is: Box Name Box Date ID1 ID2 ID3 .... Where there is not a fixed number of IDs in each box (There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like Variable 1 Variable 2 Variable 3
Daily Iam Entrying 100`s Of Supplier Data And Material Detail,
I Want Data Should Be Poped Out While Entering In Dataentry Sheet And Data Selction Should Be From Ohther Prefilled Cells. Auto Merged Post Until 24 Hrs Passes;Here Is The File
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
I have attached an example. Basically I had this set up to calculate the row and give the answer at the end. But now I cant see the results without scrolling, so I want to move the answer fields to the C column and add new data into the D column while keeping all the data in the formula.
count 0 and negitive number cells since last positive number from right to left.xls‎
I'm trying to use logic to identify trends...in each of the strings below, I want to count the occurrences of the left most character appearing consecutively. The answer is to the left
I'm trying to do this via a formula vs. vba if possible
I have a spreadsheet with data down column A. The data is either numeric or alpha numeric, however, it is not seen as numerical.
Is there a formula I can use to count the total number of cells with only numbers in against other criteria too? I can use Sumproduct for 2 criteria but can't figure out how to do the 3rd.
there are unique entries like AU0896 etc. that are repeated in my list. my job is to find how many unique entries there are and add the count at the end so, basically if there are 6 AU0896 entries, then I must create a AU08966 value.
I am hoping this can be done with formulae. Starting at C7 and continuing down the C column there is a list of names which could potentially run from C7 to C5000. This list of names will contain duplicates. For each name there is a corresponding 'reason' in the F column which will contain the word 'Truancy' or 'Late'.
I need a formula that can count the number of UNIQUE names in the C column which correspond to the word 'Truancy' or 'Late' in the E column.
An example,
[Name].....................[Reason] C7 ...........................E7 John Potts.................Truancy 2 Matt Jones................Truancy 10 John Potts.................Truancy 4 Matt Jones ...............Late AM Pete Burns................Late PM Pete Burns ...............Late Both Steve Lopez..............Truancy 6
Count of unique names with the word Truancy in the corresponding E column = 3 [John Potts has 2 instances of the word truancy in column E but this is only counted once]
Count of unique name with the Word Late in the corresponding E column = 2 [Pete Burns has 2 instances of the word late in the E column but this is only counted once].
Trying to write an if statement giving a simple value of 1 if a time is outside of weekday hours 8am to 9pm. Cell formatted as (6/3/17 2:15 PM). Function should report "0" value as this is a Tuesday between 8am and 9pm.
A cell formatted as (6/3/14 7:54 AM) should result in "0" value.
What I am having trouble with is after making a data validation list in a column, I need to count each separate list entry and display it in a "totals" column. The drop down list has 4 entries yes, no, blank, and pending. The formula must count which value has been selected from the list and return it to a cell same as the COUNTA. I.E. 100 rows in the SS 50 are yes, 25 are no, 20 are pending, and 5 are blank.
I have a bunch of data and I want to be able to count the number of entries that fall within each of the 24 hour increments in a 24 hour clock. (military time)
For 12:00:00 all times would be between and including 12:00:00 and 12:59:59
I have a column of values in "£"s and i need to count how many entries there are within a range. I have been able to do it with text but not money values with £ signs!!
Count unique entries in a column according to two specified criteria.Specifically, I am trying to count the number of days in a month a supplier has a visited.Below is an example taken from the excel:
COLUMN A COLUMN B Date Supplier 01-ago-12 Mr X 01-ago-12 Mr X 01-ago-12 Mr X
I want a formula that allows me to see how different dates Mr X has visited in each month. So in August he has visited 8 times BUT only on 5 different dates.
In the case of Mr Y I want the formula to give the answer 5 (even though he has visited 6 times in total, he has visited on only 5 different dates).
In the case of Mr X in September, the answer to the formula would be 2, since has visited on 2 different dates in September.
1) Type in a text data in a predesignated entry box
2) Excel automatically inserts that text into a table
3) If that text is already in the table, then adds a counter next to it (or increases the counter by one)
4) Excels then clears the text data in the entry box
Basically, I want to tabulate the number of times a specific entry comes up, and it would be much faster if I can just type it in, press enter, and let excel do the rest. It would be ideal if I can also add a date to that entry, so the data table comes up to something like a date vs the entries table, and the intersection would be the number of times each entry comes up on that day.
I want to have a function that counts the number of times each word appears, so in the cell next to each entry for "Superman" it would say 3, for "Bird" 2 etc. If I add another "Superman" it should then change to 4 next to each entry. Also, I will be adding new words all the time, so the function needs to be able to cope with that too.
I have some data, similar to below which is sales data for each sales peson in my firm. The info I have is the name, the quoted value and the sold value. I estimate by the end of the month I will have over 400-500 entries so dont want to do this manually.
I have been able to use the sumif function to tell me the totals that each sales person has sold and quoted.
Now I want to work out the
min and max that each sales person has quoted and sold
and
The number of sales each sales person has had
Are there formulas to do this?
Ive looked at the min/max functions but I believe they will only give me the min and max for all of the quoted and sold whereas I want this by sales person.
I have also looked at the count function but this will only provide a count of the entire number of sales and quoted, again I want this by sales person.
