Different SORT Based On Data Entry
Dec 27, 2008do Different SORT based on data entry.
I have a macro in a workbook that looks like this:
ADVERTISEMENT
Automaticallly Sort Data On Entry
Nov 9, 2006I was wondering how I would use vba to alphabetize a column of names. I also was wanted the column automatically adjust itself if a name were deleted from the middle of the list so the remaining names would shift up to fill the empty space. Then if a new name were added at the bottom it would automatically phase it back into its proper place.
View 4 Replies View RelatedGetting Entry In One Cell To Cause Entry In Another Based On Entry In 3rd
Mar 20, 2014I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
Sort New Entry
Jun 11, 2008I have a simple sort function that works pretty good
Sub SortSupplier()
Range("A2:F20").Select
Selection.Sort Key1:=Range("A2:A20")
End Sub
My problem is that after the last active row I always want it to say "New Entry" in the cell.
Auto Data Entry Based On Dropdown Choices?
Jul 31, 2014I need to know how i can select an option from a dropdown list and have it drew data from a table and place it in a certain cell based on my choice.
i have attached a sample form.
in the sample form i have two dropdown lists.
Countries and POD
What I need is when i select an option from the POD list the data on the Rate table will appear on the left side in order of course.
Attached File: test1.xlsx
Prohibit Data Entry Based On Adjacent Cell
Mar 14, 2013I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
Copy Data Based On Cell Entry To Different Spreadsheet
Nov 10, 2008i am trying to find a way to automatically copy information from a worksheet on my computer([list.xls]-List of accounts) to a worksheet on a shared folder([summary.xls]- accounts that have paid)
example:[list.xls]Sheet1!A:A has account numbers, C:C has account balance and D:D has notes on account.
If D:D is "paid", copy acc# to [\foldersummary.xls]Summary!A1, balance to B1 and notes to D1.
If D:D is "payment pending" do same as above but in row 2 and so on.
Limit Data Entry Based On List Values
Dec 17, 2007I need to create a Drop Down Menu that gets it's data from another group of cells. I have done this before but it has been sometime ago and now I can't remember.
View 3 Replies View RelatedAutomate Data Entry Based On Existing Entries
Aug 8, 2008Daily Iam Entrying 100`s Of Supplier Data And Material Detail,
I Want Data Should Be Poped Out While Entering In Dataentry Sheet And Data Selction Should Be From Ohther Prefilled Cells. Auto Merged Post Until 24 Hrs Passes;Here Is The File
Excel 2010 :: How To Filter / Sort Data Based On Partial Match Of Data In Cell
Apr 16, 2013I am using Excel 2010. I am a novice user.
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d
[Code] .........
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d
[Code] ......
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d
So my table would show the name "data_out_reg" and the range of values 8-32
Automatically Sort Data And Ranking Based On Sorted Data?
May 22, 2012In the attached spreadsheet I track the performance of my team. I enter the AHT for my team in the work sheet named "AHT Summary".I keep updating this data every month. automatically sort the updated data and rank the agents based on their average AHT. The person with the lowest AHT should be ranked 1. Column is highlighed in green for your reference. Based on this ranking the work sheet named "Ranking" should be updated automatically. Since I am taking a weighted average for all agents, the one who gets the lowest AHT should be ranked 1st . In the ranking work sheet the agent with ranking 1 should be given 100, the second highest ranked person should get 98,third 96,fourth 94 etc.
View 6 Replies View RelatedGenerate List Of Data Based On Sort Data From Another Worksheet
Feb 25, 2014I have Sheet1 "MASTER" and Sheet2 "Area1" and Sheet3 "Area2" etc...
My MASTER sheet has a list of employee names and the areas they work in. I have employees working in different areas, and I want to pull a list of employee names from the MASTER working in Area1 (sorted on the MASTER sheet) to column A on Sheet2, then pull a list of employee names working in Area2 to column A on Sheet3, etc...
I want it to do this in such a way that if I add an employee to Area1 on the MASTER data, it will populate that employee in the Area1 Sheet.
So basically, I'm looking at one column on the MASTER sheet to see if the area matches. Then looking at another column on the MASTER sheet to get the name. Then taking that name and transposing it to a new sheet corresponding to the area they work in.
I've attached a sample sheet. I want Column A in the Area1 sheet to reflect all names that show up on the Area1 LIST on the MASTER sheet, and nothing else. I'm using VLOOKUP to pull the rest of the data from the MASTER table.
There is a new sample workbook up now. Couldn't update it sooner due to site outage. I've removed irrelevant data to improve readability and focus on what I'm trying to achieve. Again, the main issue is scraping column E from the Master, and populating a list of all employees who match certain values in Column E on the Master in Column A of the other tabs.
Prevent Duplicate Data Entry Via Userform Based On Exact Match In 2 Columns
Jul 16, 2012I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc
Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example
John Red
Julie Red
Bob Blue
John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
VBA To Sort Data Based On Column Values
Oct 8, 2012I have a spreadsheet that track orders. I want to be able to add a bit code to my current VBA script that sorts the data based on the values in a particular column (smallest to largest).
Current table looks like this:
Order Number
Date
Quantity
Colour
Priority
548562
12-09-2012
56
VBA formula
2
[code]....
I want to add be able to sort the data, smallest to largest based on Column E (tittle Priority)
How To Sort Data Based On Numbers From Lowest To Highest
Feb 17, 2014I can't find a way to sort my data. It looks similar to below. And I need to sort them based on the numbers from lowest to highest.
Tom Simmon (23.2)
Jason Paige (19.1)
Jeff Johns (14.1)
Custom Sort Data Based On List With More Than 255 Characters
Apr 21, 2014How to sort a column of data based on a custom list with more than 255 characters.
I have created a named range with 40 entries and then added data validation in the cells of column D using the above named range. However, I want to be able to sort column D in the same order as the named range but the custom data sort lists are restricted to 255 characters.
Filter And Sort Data Based On Names And Hours
May 2, 2014I just want to filter and sort the data based on names and hours.
Here it goes:
1. Filter Column F.
2. Filter it by: UK & M UK
3. After that, filter Column E in "Ascending order"
4. Count the data that are:
-starts 1:01AM - 7:59AM and display the total count in Sheet2, if there are no data in other specific time, then display a value "0"
For example for UK and M UK:
In Sheet 2, ("F5") = 3 as there are 3 data, G5=1, H5=0 and so on and so forth..
I've attached my file : Filter and Sort.xlsx
VBA To Custom Sort Data Based On Referenced List
Feb 17, 2014Sort Example.xlsx
I have data in Sheet "Schedule" in range A8:C160 (including column headers), but note the length (rows) of the range is dynamic.
A8 = Customer
B8 = Load Time
C8 = Delivery Time
Columns B & C are formatted as h:mm:ss AM/PM, but Column B also includes text..."PRELOAD"
I would like a macro to sort the data based on column B, but the sort must follow a specific order, which is listed in Sheet "TimeSort", range A1:A50 (including header).
The custom order basically has "PRELOAD" sorting at the top, then sorting everything else chronologically starting at 6:00am.
The desired outcome would sort the range based on column B as follows...PRELOAD, 6:00:00 AM, 8:00:00 AM, 12:00:00 PM, 5:30:00 AM
Example is attached (desired sort is reflected).
Expand Table To Include Missing Times From Data And Sort Based On Multiple Criteria
May 6, 2014I have a set of data (assume 2 columns, one with a long name and the second with a time). The names contain variables that must be used as criteria (a single entry may contain "Blue" and "On"/"Off") and times vary, based on when the Name turns "On" or "Off" [in minutes: 25 (On), 47 (Off), 89 (On), 100 (Off) and 137 (On)]. I need to create another table that automatically inserts values for all times, to include the missing times (0 min thru 24 and 26 thru 46, etc.). EX: If the first entry is "Blue-On" at "25 minutes", the cells from 0 minutes to 24 minutes are each "0" and become a "1" at 25 minutes - the following cells are "1" until 47 minutes (where it is turned off). (1 and 0 represent "On" and "Off", respectively)
How can I created a formula to insert the correct numbers into the correct places? I'm willing to have multiple cells with formulas and simply hide the columns that are doing the calculations.
VBA Code To Sort Data - Run-time Error When No Data To Sort
Mar 4, 2010I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings()
Dim iCTR As Integer
Dim yCTR As Integer
Dim zCTR As Integer
zCTR = 11
For iCTR = 12 To 23
For yCTR = 1 To 10
If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then
Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value
zCTR = zCTR + 1
End If
Next yCTR
Next iCTR
Range("AA11:AA" & zCTR).Select
Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
Countng Cells Based On The Entry
Oct 6, 2008i have the following formula which counts various cells containing dates and i need to add in a count for 1 cell, BV21 but it needs to count 3 if theres a date and 0 if the cell is empty or reads NA
=COUNT(AS21:AX21,BH21:BN21,BR21:BU21,BW21:BZ21)+
(COUNT(AY21,BB21,BE21,BO21)>0)
+(COUNT(AZ21,BC21,BF21,BP21)>0)+(COUNT(BA21,BD21,BG21,BQ21)>0)
+IF(CB21>0,CB21,0)+IF(CD21>0,CD21,0)+IF(AP21="Y",2)[/size]
might be simple to some but it really has me stumped.
Countif - Based On Other Cell Entry
Aug 21, 2009dont know if this can be done using a formula rather than VBA...but is there a formula that would change the countif range based on another cell entry. so the formula below has a column range of 2...so the other cell entry would be '2'.
=COUNTIF(B1:C1,"=Y"). If i then changed the cell entry to '4' the formula would change to. =COUNTIF(B1:E1,"=Y")
Entry Based Execution Of Macro
Dec 19, 2008I have to make eighty to ninety entries daily in Column B. Then transfer these entries to another column N,(by copy/paste) after that a maco "text to column" is executed. Now I have linked Column B to N like =B2, =B3, etc. etc. thus instead of copy/paste, the data when entered in Column B, is automatically going to Column N. I wish that the macro (text to entry) may be executed by each entry made in Column B. Is it possible with a macro?
View 7 Replies View RelatedCell Sound Based On Entry
Dec 1, 2006I will try putting the Code Tags in correct this time, I think I figured out what I have been doing wrong.
This code will allow one cell to make a sound when a condition is met. I am trying to have each cell stand on its own. Example cell A1 would sound a Ding if the number >100 and cell A2 would sound a Tada if the word Cat would be returned ....
Automatic Formatting Based On Number Entry
Oct 2, 2008So the title isn't really totally descriptive but it was all I could come up with. I have a work book that has 30 identical sets of 5 cells for users to enter in information. Some of my users will not need all 30 sets. I'm wondering if there is a way for the user to enter the number of cells they need and have excel then format so they have the desired number, instead of 30. Then have excel change all the instances of this number in formulas so that it matches the new number of cells. I hope I explained this well enough for someone to help.
View 9 Replies View RelatedSelect Tabs Based On Cell Entry
Dec 17, 2008i'm trying to basically use VBA, so that when a list of work tab names are entered into a column in say Sheet 1..these tabs are then selected.
View 4 Replies View RelatedFill Value In A Cell Based On User Entry
Mar 26, 2009I have a dilemma.
1.I want to be able to a have a cell be filled with a certain value when the user enter data in Column C.
2.I know that this can be accomplished by a formula, but my spreadsheet will work my efficiently with a macro.
3.I do not know much about VBA but I believe that I will need a macro for each sheet that fills in the word.
Hide Columns Based On A User Entry
Mar 28, 2009Is there a way of a user can add a number in a cell and this would hide a different amount of columns.
OR :
Ideally I would prefer a drop down with dates and the user could select a forward date and all the columns with dates up to that would appear. This would mean they could look as far our as required and all unwanted data would be hidden.
Insert Formula Based On Cell Entry Using Vba
Oct 5, 2009i'm sure this can be done but i cant get an angle on the method. i want to use VBA to put a formula into cell G3 based on the users entry in cell D3 so, for example the user enters M in cell D3 and the VBA code puts the formula "if D3="M",A3,0"into cell G3
i know i could use a formula in the cell but i want it to work with multiple entries so i figure VBA is the way to go.
Selecting Cells Based On Textbox Entry
Oct 12, 2009I have a user form with some option buttons (1,5,10,etc...) that are used so the user can select a given number of cells they want selected. My last option button is labled Other(optOther) and has a textbox next to it(txtOther).
What I am trying to do is give the user the option to either select one of the given numbers or be able to enter their own number. The data will then be extracted from one worksheet to another. I have all the coding for the optiong buttons with the given numbers, just cant figure the textbox one out.
My data starts on B5, so what i am trying to do is when the user enters number n, i would need data from B5:B(n+4).