I want to be able to connect two spreedsheets.
I have a "surplus inventory" sheet and a "inventory shipped" sheet. How can I input how much I shipped in the "inventory shipped" sheet and make it take away from my "surplus inventory" sheet automatiaclly?
I have a spreadsheet with info about students in a summer program. I need to pull out the students who have allergies along with what their allergy is and their emergency contact phone number. I would like this new info in a new spreadsheet.
Here is an example of the spreadsheet:
allergiesnamephoneallergy type
nobob410.555.1234
nojim410.555.5843
yesmeg410.555.7458nuts
nolex410.555.1159
yeswill410.555.5005fish
Is there a formula that I can use?
I have a list of cities, counties, and schools with dates for each account. I want to put these into a workbook with tabs along the bottom for each one, then I want to be able to select all of the accounts that have a Jan 1st effective date and show them on a list in the first worksheet.
View 9 Replies View RelatedHow do I keep all the info entered onto a form intact even if it has been entered so that someone can click a back button to review what they have entered? In other words even if a user closes the form is there a way for that info to stay on the form?
Private Sub cmd_Enter_User_Input_Click()
Worksheets("PowerAnalysis").Activate 'Make Power Config_Draft_New 2.xls.xls active workbook before entering data
Range("B2") = TextBox1.Value 'WCID
Range("C2") = TextBox2.Value 'CSA
Range("D2") = TextBox3.Value 'HDT Terminal Address
Range("G2") = ComboBox3.Value 'Tech Type
Range("H2") = TextBox5.Value 'Cabinet Size
Range("K1") = TextBox6.Value 'Existing ONU's
Range("L1") = TextBox7.Value 'PGA Cables
Range("M1") = TextBox8.Value
Range("N1") = TextBox9.Value
Range("O1") = TextBox10.Value
Range("K2") = TextBox11.Value
Range("L2") = TextBox12.Value...............
I'm trying to have a drop down list in a spreadsheet which combines the info from two columns.
For example:
A B
1 John 29
2 Sandy 40, etc
And the drop down list turns into
John 29
Sandy 40
Is this possible?
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies View RelatedI have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedI have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
I have a spreadsheet that I have a lot of macros that are attached to a customized toolbar saved in the same spreadsheet. I saved this is a read-only file. When I open as read-only and run my macros (testing), I save it as another file. When I then open the "template" to do the same thing, the toolbar/buttons now reference the file I previously saved as something else. Help please? Is there a macro that would delete all macros before saving the file as something else?
View 9 Replies View RelatedOften I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
I have noticed that the basic problem I have is a common one on this forum with different varibles for different people. I have attached a dummy copy of the spreadsheet that I am using.
I need to copy cell information for one spreadsheet to one of 2 other spreadsheets depending on a dropbox condition. The master spreadsheet is the Issues spreadsheet, and depending on whether the user chooses Transferred Complaints or Transferred Offences (in Column K) I need to transfer certain cells to the Complaints or Offences spreadsheets.
The information I need to transfer from Issues is: .....
I have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
I have a Main Customer Spreadsheet. I want to Auto Populate FROM the Main Customer Spreadsheet to a New Spreadsheet. I want to be able to key in a customer name on the New Spreadsheet and take the info for that customer from the MAIN Spreadsheet and fill in the blanks. I need to be able to do this several times a day.
View 3 Replies View RelatedIt also renames the CommanBarPopop with the new filename.This allows the user to open both Projectworkbooks/files (If required) and load each CommandBarPopup for different filenames .Therefor opening the Userforms and worksheets for the CommandBarPopup clicked ...
View 9 Replies View RelatedWondering if there is an easy way to compare 2 spreadsheets that should have identical data on them? The first spreadsheet (Before) has the output data from 'before' a code fix was applied. The second spreadsheet (After) has the output data from 'after' a code fix was applied. The spreadsheets have 7 columns of data and almost 500 rows.
I've already copied the data from the source datasets provided by my IT folks into Notepad (.txt) files and then used Excel to open them as fixed width spreadsheets. I have 1 workbook with 1 spreadsheet with 'before' data. And, I have 1 workbook with 1 spreadsheet 'after' data. And, I have another workbook that contains both worksheets. So, I'm ready to go whenever I get hints of what to do next. :-)
I need to be able to show my client that we did not impact the data with the code fix that was applied. I want to be able to show my client contacts (business folks) an end result via Excel that confirms that I actually compared the 2 sheets and there were no differences. In other words....I can't just show them a formula with '0' as it end result (even tho that's basically what I'm trying to prove).
I need to write a macro that will import data contained in another spreadsheet, but am unsure how to do this. I have several (about 15) spreadsheets that contain data. I need to import key bits of this data into one central spreadsheet that will be used for reporting purposes. I only need 2 cells worth (values) from each source spreadsheet, to be pasted into the destination spreadsheet, into designated cells.
The source spreadsheets are usually closed down and kept on a file server, which my PC has access to. Ideally I want to activate this macro with a control button - i.e. I press the button once and the macro goes off and collects/updates each field with the latest data stored in each of the source spreadsheets.
I wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
I am using VBA to open an IE page and try to get some info however i cant seem to grab it
This is the code i have..
[Code].....
I have inspected the code from the website and it is this
[Code] ........
The problem is i dont know how to get the info in the "Metaname, ICBM".
I am trying to recall info from the rows in another part of a worksheet when I type the first column. For example, I have over 300 rows of:
Apples 155 12oz red
Orange 120 10oz orange
Banana 50 11oz yellow
etc.
I want to select or type only the word:
Apples
And have the rest of the columns fill in with the rest of the info, like so:
Apples 155 12oz red
A filter would work well to select, except I need about 7 in the worksheet as it is a form and excel only allows one. I can’t seem to make the advanced filter work. An IF function would work, except I'd have to put all the words to match in " " marks, which would be very time consuming.
how I can recall the info from my list to the 7 lines I need to copy them into?
how to use vba in excell. First question. 1) I have a spreadsheet with names in column one and other info in columns B-I. I would like to make excell do the following. If I enter the name a second time and so on, then can excel take the info out of certain cells from the first entry? Say column C, D, and G and auto enter them for this new row. 2) can I copy parts of a sheet to a new sheet and then when I make changes or new entries then they will update the copied sheets info?
View 7 Replies View Relatedi have this code that gives me 1st row of data , from Row 10 of every sheet in workbook, how can i modify to give me row 11 ,12,13,14,15,16 as well upto row 21 if there is Data in Col C ( max range is C10:C21) ,
For intX = 1 To Sheets.Count
For intY = LBound(arySkipSheets) To UBound(arySkipSheets)
If Sheets(intX).Name = "MachCapRpt" Or Sheets(intX).Name = "MachAdSht" Or Sheets(intX).Name = "Times" Or Sheets(intX).Name = "MachSchd" Then
Else
.Range("A" & intNextRow).Value = Sheets(intX).Name
.Range("B" & intNextRow).Value = Sheets(intX).Range("B10")
.Range("C" & intNextRow).Value = Sheets(intX).Range("C10")
.Range("D" & intNextRow).Value = Sheets(intX).Range("E10")
.Range("E" & intNextRow).Value = Sheets(intX).Range("H10")
.Range("F" & intNextRow).Value = Sheets(intX).Range("M10")
.Range("G" & intNextRow).Value = Sheets(intX).Range("W10")..............
I have the following macro that I found through Search (written by Peterss) and have been able to modify it to work for me.
Sub MergeBooks()
Dim myFolder As String
Dim myBooks
Dim ws As Worksheet, wsMaster As Worksheet
Dim nr As Long, rws As Long, i As Long
Dim LR As Long
Application.ScreenUpdating = False
Application.EnableEvents = False
myFolder = "C:Documents and SettingsNalaniDesktopForecast"
I have been trying to get the information from the Next Workbook to move over 5 columns (E), then the Next book to move to col (I), etc.
How to return the value of what i looking up. for example i want to find the value of A1 from a range of B1:B10 if A1 is B1 then it return the value beside B1 for example the value of B1 is C1
View 2 Replies View RelatedI'm copying and pasting data from a PDF and need to eliminate some unnecessary data. The original .pdf has 4 columns: Account, Dollar Amount, Name, Notes
When I copy this to an excel document, it copies the row from all 4 columns into column A. The two columns I need are Account and Dollar Amount. All account numbers are 8 digits so I was able to create a formula to weed that out with this: =left(A1,8)
The problem I'm running into is obtaining the dollar amount within the cell. For example:
A1 contains: 11112222 $1234.56 Sample, Name Sample Note
I pull the 11112222 with =left(A1,8) in column B but not sure how to pull dollar amount to column C.
Further, the dollar amount varies from $1.01 to $10,000+
I have names in cells in this format.
Smith John
I would like to switch that around so the name in the cell looks like this
John Smith
Is there an easy way to do this?
Im trying to take information and have it copy to a different worsheet when a certain selection or type is put into a column.
Example:
On worksheet "Alpha"...
Column "A" will have "Maintenance, Supplies, or Payroll" in it.
Column "B" will have a currency.
On Worksheet "Bravo"...
I would like to have everything from Column "B" on "Alpha" to be placed here that has "Maintenance" in Column "A"
On Worksheet "Charlie"...
I would like to have everything from Column "B" on "Alpha" to be placed here that has "Supplies" in Column "A"
Etc...
The spreadsheet is used to keep track of shares that are purchased / sold
It will make all tax calculations as well as provide a single statement showing all transactions rather than having to sort through dozens of individual statements.
I seem to have most of it working but could use some help with the following.
I would like to be able to have a spot (maybe on a separate worksheet) where you could enter the four items from which everything else is derived, share price, date, number of shares and whether it was a purchase or a sale, and have it automatically:
1. add a new row (complete with formulas and formatting info) to display the new information
2. sort the new data to fit into the right spot in the spreadsheet by date.
I have about a 100 sheet workbook for a project my company has upcoming. All the sheets are numbered 1-100. I also have another sheet that has the description of each pay item on ROW B of the sheet. Well here's my question. I'm trying to get a function that i can just copy and paste in each sheet instead of changing the number on each sheet.
For instance...
I would be using =Descriptions!B2 for sheet 2, and then =Descriptions!B3 for sheet 3 and so on. My question is does anyone know how i can get the sheet name so then i could just copy and paste one function that would be like =Descriptions!B(SheetName)
So that way i can just copy and paste instead of having to change it each time. I found this function to get the sheet name but can't seem to incorporate it into the =Descriptions!B