I have a table and I would like to get result 8.21 in weekly total. It can get with calculatar like this.
Before Decimal:
1+0+1+1+1+1+1=6
After Decimal:
9+44+10+08+13+16+21=121
When we substract 121-100=21 and divide 100 with 50=2
Now, we add 6+2+0.21=8.21
result should be 8.21, how can we get this result.
Feed Consumption Weekly
Total1st2nd3rd4th5th6th7th1.90.441.11.081.131.161.218.21
Every week, in row 3 i enter the number of boards cut. In row 9 i want a running total, but until this weeks total is entered, i dont want anything to show. This is the data for a bar chart which i print off every week. Next week is week 3 and i will enter the data in cell d3. When i do i want cell d9 to show the new total of B3,C3,D3. And so on each week.
View 6 Replies View RelatedI have already an existing formula to get only the amount from the previous cell. From a6 to a30 it contains the word "11/05/09 press release $100", so in b6-b30 this is the formula. =IF(ISNUMBER(SEARCH("press",A6)),RIGHT(A6,LEN(A6)-FIND("$",A6)),"") until b30
the problem is in b6:b30 the 100's were not a number you have to copy and paste to other cells using paste special then values then click the smart tag and convert as a number to get all the total from b6 until b30.
I have a spreadsheet with rows of entries that are listed by date. I would like to create anther worksheet where i can refer back to the other sheet and calculate the total prices per work week. Is there a way to do this using a function(s)?
View 14 Replies View RelatedWe have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
View 3 Replies View RelatedOften I write the formula in the cell of an excel spreadsheet in vain, it does not work.
Excel only displays the formula in the cell such like = if(B2>2;2;0), and not the result.
Formula is correct, so I don't know why it happens. Most often this occurs when the formula is between worksheets or different excel files on the corporate server.
We have two different workbooks (Master & Slave) both the workbooks have one unique column i.e ID. Slave workbook has duplicates ID along with Amount figure. We want to get the sum total of those duplicates ID's amount and single entry amount should also be reflected on our Master workbook amount column. eg
Slave Workbook
ID Amount
766 800
566 900
766 1000
675 200
566 100
Master Workbook
ID Amount
766
566
675
I'm having the following problem:
A1 & B1 = variable inputs from a calculator
Value C1 is calculated as follows: IF(A1<=0,"",(B1*G1))................(where G1 is a fixed value with 6 digits)
MY PROBLEM: The result in C1 should always be a ROUNDUP value.
I just don't know how to combine ROUNDUP with IF(A1<=0,"",(B1*G1))
I have multiple sheets in excel file. Every sheet having same information for different areas. e.g. The bug was reported. One sheet might have answer in YES and other sheet might have No. I need to get answer YES if even one of sheet contains YES for the field.
View 9 Replies View Relatedwhat I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
I have included a test sheet with notes to explain what I am trying to accomplish. With the current code all works fine if I enter the data manually in column G, but when I do copy and paste for the whole column G it does not work. Is there a way to have the totals in column K convert to value row by row only if I simply paste data in Column G?
View 6 Replies View RelatedI entered exactly 113,876.92 in cell L16 I entered exactly 113,390.02 in cell L17 I entered =L16-L17 in cell L18 L18 incorrectly shows the result at 486.9000000000009000 (note the extra "9" after the 11 zeros). When I expand the viewable digits on L16 and L17, they have ALL zeros after the cents. (I went out at least 25 digits). I can't be the first one encountering this.
View 4 Replies View RelatedI've got general ledger information that I export out of my accounting software (see attached spreadsheet). From there, in another spreadsheet I do vlookup formulas to get information from this general ledger. However, in order for the vlookup formulas to work properly in the other spreadsheets, I have to go through this general ledger spreadsheet and manually enter just the first five numerical digits in column A for each Total row. I would like to be able to find a solution that would return just the first five characters of the category (column B found at the top of each section) into the cell in column A on each total row. I usually have to manually enter 50-100 of these many, many times a month so it gets time consuming after a while. I'm using Excel 2013.
View 1 Replies View RelatedIn the attached workbook, the CASTINGS worksheet has a SOH ( stock on hand) column.
It looks up the SOH from the SOH worksheet (column 3) for each product on order for that week.
But how do I make week 2 use the SOH figure minus the previous weeks order, IF there was an order?
And so on until week 52.
The problem I have found is what if that product wasnt ordered for the last 4 weeks? Maybe I need a temp worksheet with all the products listed for all the weeks and a running total of SOH weather it is ordered or not?
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
The attached workbook is a follow up report that gets run every Friday. There are 1092 cells that contain formulas that reference a file that was created on Wednesday of the same week. eg.
View 5 Replies View RelatedFor a weekly import into Excel, I need to delete the last row each time. I'm using Excel 2010. My first thought is to start with the first cell, A1, and use .End(xlDown) to find the last row. Do I have to assign a variable to hold the row value then delete it? Or can it all be done in one statement without a variable?
View 4 Replies View RelatedI need to copy the values of a range on the weekly sales worksheet to the monthly sales worksheet. The last column is the total on the weekly sales. Part of the heading of the total column is the week ending date (e.g. 10/17/2009. On the Monthly Sales I have the months in columns by week ending (e.g. 10/17/2009).
Range I4:I28 to the monthly sales worksheet by date.
I have a simple time sheet that I want to insert weekly dates by the date I have. I don't know the formula for that. I've attached the time sheet. TimeSheet2.xls
View 10 Replies View RelatedI created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View Relatednumber for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI am looking for a formula to calculate overtime on a weekly basis, entered daily, on a sheet with multiple weeks. It need it to calculate the overtime each week.
View 8 Replies View Related[URL]
attached is a returns sheets that a qty is logged against part number every week. Some of the data I can use pivots on ( no problem ), but I have an issue on the returns tab where I think index/match / sum or something else will be better. At the moment because of the layout of data I have to drag each week number into the pivot value, do a greater than zero filter then summarize as a sum (yuk) I just cant get my head around index/match /sum. It would be great just to be able to enter a week number, and all the warehouse, part numbers and qty came through. There is a short explanation on the returns tab of what im looking for.
so in essence I want week numbers across the top, but be able to enter a year on the returns tab that looks at the week number. I don't know enough about the formula to change.
Need the formula to enable a cell to automatically update the date on a weekly basis
View 2 Replies View RelatedI have an excel 2007 script that downloads daily stock data and prices. I do analysis and graph the data.
I would like to keep the download the same, but modify my analysis so as to obtain weekly and/or monthly data.
I am sure this is commonly done, and is not rocket science, but so far I am baffled as to the procedure / algorithm to do this.
This is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
I have 12 observations per variable over 2013. At the end of each month I gathered the average value of X of said month. What I want to do is convert these observations to a list of weekly observations, where each week in January gets the value of the January observation
Example:
Month123456789101112
Value 2345678910111213
And get it like:
Week Value
1 2
2 2
3 2
4 2
5 2
6 3
7 3
and so on.
Since I've got a lot of variables I'd like to use some kind of formula.
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View RelatedIn my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx