I am creating a worksheet as we have collect client satisfaction surveys. I have created a worksheet with each question at the top of the columns and the answer (yes or no) with data validation. I input each survey into a new row. I now would like to total how many people answered Yes and how many answered No. What formula can I use to total the answers?
View 6 RepliesI have three codes (P, /P, P/) that could be entered in range H5:P5. P is counted as 1; P/ and /P are both counted as ½.
I have the following formula in D5:
=COUNTIF(H5:S5,"P")+COUNTIF(H5:S5,"P/")/2+COUNTIF(H5:S5,"/P")/2
I entered the following formula for data validation:
=SUMPRODUCT(--(H5:S5="P"))+SUMPRODUCT(--(H5:S5="P/")/2)+SUMPRODUCT(--(H5:S5="/P")/2)
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View RelatedThis may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
I have attached a sheet that I am working on. I want cell G1 to be less than or equal to 165. That cell contains a formula. If the formula takes the number to over 165 the validation is allowing it.
View 2 Replies View RelatedI would like to know if it's possible to populate a data validation list based on what is selected from 4 validation lists?
for example:
On sheet1:
If 'Group1' is selected from data validation list1 then data validation list5 will show a list of all items from Group1. If 'Group2' is selected from data validation list2, then data validation list5 will display all the items in 'Group2'...
(I do not want to use a combo box for this)
I have several files of data that are from a data logger. The data is broken up by day. Each day has roughly 43000 rows of data, at its sample rate. This has made charting the data a nuisance. Is there a way to resample the data so it fits in the 32000 points excel can chart? In the future I will set a sample rate that will keep the number of points below the 32K per series. I would like to be able to have the total number of points reduced by averaging the data not by simply deleting one of every four rows.
View 5 Replies View RelatedI had some of values in Column A, B & C for ex: column A has brand name, column B has model name and Column C has sub_model name here i have a limited values i need to make it as drop down list but i had a problem with the below formula.
=IF($F$2=Sheet2!$H$2,al_v,IF($F$2=Sheet2!$H$3,am_v,IF($F$2=Sheet2!$H$4,au_v,IF($F$2=Sheet2!$H$5,be_v,
IF($F$2=Sheet2!$H$6,bmw_v,IF($F$2=Sheet2!$H$7,bg_v,IF($F$2=Sheet2!$H$8,cv_v,I
F($F$2=Sheet2!$H$9,ch_v,IF($F$2=Sheet2!$H$9,ch_v,"")))))))))
i need to add some more ifelse but the validation don't allows it.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
View 3 Replies View RelatedI'm sure this can be done but I don't think I have the formula correct. What I am trying to do is add each day's total while displaying a positive number if the total exceeds 6000.
View 5 Replies View RelatedI'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
View 2 Replies View RelatedI am trying to create a very basic workbook that has 2 worksheets. one is a daily input for tonnes, that then just gets cut and pasted to a different program, and the other worksheet is the running total. i.e., it adds up every time you update it.
been trying to figure out a macro so when you press the update button it then just updates the monthly total.
Colac Production.xls
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
I want to load the actual data exist in the rows by selection value from the data validation list.
E.g I have two worksheet in one excel file. One has a data activities of persons with their name like two columns i have in which one exist the name of person and second exist the activities which they perform.
On the second sheet, i made a data validation list of all the person names
Now my requirement is, when i select a person name from the list, load all the data from the 1st sheet to second sheet. Is this possible without VB code, because I want to share it on the Google sheet with my boss, where VB sheet is not supposed to work.
How can I add up the above and give me a total of their classes when the classes and percentage will change all the time
View 6 Replies View RelatedIs there a way to use Data Validation that will pull data from a source list and also be able to type in additional data or just new data in same cell?
View 3 Replies View RelatedI have a excel sheet with values correcponsing few names. I have a list for a Data Validation drop down. How to get all the data row wise for the name selected in the drop down.
View 3 Replies View RelatedI am trying to learn the concepts, then apply them to a set of actual worksheets. I am trying to use named ranges from one worksheet in another worksheet. The named ranges need to expand. Although I can get the add data to a dummy worksheet to work within the same worksheet and I can even get a named range to work in the foreign sheet.
My problem is, when I can end up adding the additional data to the named range, it will only add one name. I have a number of named ranges that are referenced on various worksheets. The idea is, certain named ranges should be able to expand so I donft have to type them all in. (There could be hundreds of manufacturers or models.) I would also like them to be able to sort themselves after additional names are added to the named ranges. I would also like them to auto populate as well. I am using Excel 2003 SP3 (11.8307.8221). I have enclosed the file. Drop down lists (named ranges) are on the worksheet called DROP DOWN LISTS (LOCKED) **ITfS NOT CURRENTLY LOCKED**.
The data validation issues are on the worksheet called Rev7.0 Wood (Basic Sheet.) There are other instances to use these, but I hope to learn to do them myself on the other worksheets. Of particular interest is Column f.................
In column A I have a list of text. There are blank lines in between the cell that actually contain text. What I am trying to accomplish is create a validation list that will give me only the cells with text in them and ignore the blanks. For example in column A1:A7 I have the following text:
John
Mike
Tony
Jake
My validation list will return those names but will also give me the blanks in between the names.
Is there any way to ignore the blanks?
see attached file.
I am looking for a macro that will look at the data and for each Item Description (Column C) I want it to sum the values in Column J and put in cells M1:Nxx. See example.
i tried using the autofilter and creating tables, but makes the sheet large in size...
I have data which I have plotted in a stack bar graph. I have then got the data in a table below the graph and it is all good. I would like to put a total on my data table so the user can see the total value of the stack bar.
I can't see how to get a total into the data table using the chart functionality. I have got a total in my data series but including this in my chart data just corrupts my graph as it doubles the height of it by including the total along with the data that generated the total.
creating a spreadsheet for work which is almost working a treat Unfortunately, when a row of data moves from one sheet (Queries) to another (Archive), data validation is lost. Initially I thought I daidn't have it set up on the Archive sheet, but on moving it back to queries (by use of a macro) the validation is still not working. how to keep validation rules WITH data when it is moved please? I will upload my file when I get home from work....network restrictions prevent me doing it here!
View 8 Replies View RelatedI would like to utilize data validation to create a drop down list from a list of 100 rows that changes monthly. Currently the list is set to draw data from A1:A100, however depending on the month, different cells will have data in them. What I don't like is currently the blank cells create gaps in the data validation drop down list and make it longer than it needs to be. Is there any way for excel to automatically just display cells with data in them in the drop down?
have created a list obx using data validation. My question is, is there a way to limit the data available on the list.
Example: sheet 1
A1 A2 A3
Address A
address p
address s Date
Sheet 2
has data validation list that consists of all of A1 a named range called "address". Everything works great.
I now want to be able to limit the available choices in the list depending on what cell the user is in
example: if user is in sheet2 a1, i only want them to be able to pick address that have an "A" or "p" in cell A2 on sheet 1
I tried to acomplish this using conditional formatting, I format my named range with different colors, but the colors do not carry over to the data validation list on sheet2.
I have limited ability with Excel, and I'm trying to create a database using the Data/Form menu choices. My problem is I only want specific data in two of the 20 or so fields. When I use Data/ Validation and direct data entry, I get exactly what I want, EXCEPT that the choices don't come up when I use the Data/Form. Users can enter anything they want, which defeats the purpose. I tried to build a user form to use for data entry, but I don't know how to get it to add items to a database or lookup items like the data/form process does. I also want to add a few macro buttons to the form to do other things.
I am pretty sure of a few things: 1) This should be pretty simple. Anyone knowing VBA would probably know how to do this in minutes. I found some code that did a simliar function, but couldn't interpret it to fit my needs, which brings me to 2) I'll never use VBA or complicated macros again. I don't have the need for them. This is just an isolated incident. Therefore, signing up for a class would be useless to me. I tried to locate some advanced Excel/VBA classes, hoping to find an instructor or even a student who would welcome a simple challenge, but there are none available.
about data validation drop downs.
I have 2 columns that need to be filled in once a name is selected from the data validation drop down. The data is to the right of the name in the source area.
Column A Column B Column C
1 Name 1 Skill 1 Phone #
2
3
4
This is the format, Every row in Column A has a Data Validation Drop Down, I need Column B and C filled with Data from the selected name from Column D (the data columns D-F)
Column D Column E Column F
1 Name 1 7 555-1111
2 Name 2 5 555-2222
3 Name 3 3 555-3333
4 Name 4 4 555-4444
So when I select say name 3...
Column A Column B Column C
1 Name 3 3 555-3333
2
3
4
I would like to be able to enter a number in a single column, and then Excel adds this number to a total column each time it is updated.
This is for entering via a PDA, so I need a simple entry method, ie to enter a figure, and then keep a running total every time a new figure is entered. This would only use the one column and overwrite the number each time, rather than adding up individual columns.
The attachment shows the items listed in column A, column C3 - C10 would be where I would like the number of items entered, and as I go round, I would just update the last figure. I would like the figures from C3 - C10 to be added to the Total column D3 - D10 for each item.