see attached file.
I am looking for a macro that will look at the data and for each Item Description (Column C) I want it to sum the values in Column J and put in cells M1:Nxx. See example.
i tried using the autofilter and creating tables, but makes the sheet large in size...
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J
Email in Column L
Memo in Column N
Balance in Column T
Due Date in Column P
Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L
Subject: "Company Payment Remittance Payment Date *Date from Column P*"
Body: Hello *Name from Column J*,
For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
Example Workbook for Email Macro.xlsx
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
i have a payroll grid. it has 3 cells with drop downs that have 39 options.
there codes for payments. i need a fourth cell to show a total dollor amount based of the codes selected.
separate question. i have a list of cells with the same four options (Job Types.ie service call, new connect...) i want to limit the cells mentioned before so that payment codes that do not pertain to the job type can not be selected.
My userform requires a user to enter amounts in 5 different textboxes.(textbox1-5) I have created a textbox6 to attempt to capture the totals (should be numerical) of textboxes1-5, even if this textbox figure is a 0 or a minus figure. I have browsed a few other posts with roughly the same issue and have come up with some basic code as per below... the code is pasted into each (textbox 1-5) textbox_change() code.
If TextBox1.Value = "" Then Exit Sub
If TextBox2.Value = "" Then Exit Sub
If TextBox3.Value = "" Then Exit Sub
If TextBox4.Value = "" Then Exit Sub
If TextBox5.Value = "" Then Exit Sub
TextBox6.Value = CDbl(TextBox1.Value) + CDbl(TextBox2.Value) + CDbl(TextBox3.Value) + CDbl(TextBox4.Value) + CDbl(TextBox5.Value)
A$ SING $ Euro NOK UK US$
1.07001.25000.74186.10000.62081.0000
A 934.58
B 800.00
C 1,348.07
D 163.93
E 1,610.82
F 1,000.00
G 1,869.16
H 1,600.00
I 2,696.14
J 327.87
K 3,221.65
L 2,000.00
TOTAL 17,572.23
Values in column "H" (US$) have been divided by currency rates in Raw C2~G2 as we need the total in US $
But we also want to know the total amount of each currency used in column "H".
How to put a formula to find the total value of each currency used.
I have one workbook in that 6 sheets have.
Here I want match the total one sheet to another but each sheet there is no fixed ranges so that I have confused.
How to find out Each sheet total and match each other.
below the following lists (Name, Week, Amount) I am trying to calculate a sum of the Amounts column (Column D) for two conditions: a particular week # (Column C), for a particular color (Column A).
Is there a simple formula to SUM numbers when it is based upon two conditions (color and week #)? For example, there are two separate RED amounts that should be received in Week 4 - how do I write a formula for the cell that correlates RED and WEEK 4 that states "sum the amounts for the Name: Red and Week: Week 4"?
NameWeekAmount
GreenWeek 1 5,000
RedWeek 4 13,000
BlueWeek 1 1,500
GreenWeek 3 3,500
GreenWeek 2 4,200
PurpleWeek 5 1,200
YellowWeek 4 500
GreenWeek 3 25,000
RedWeek 4 13,000
RedWeek 3 12,500
RedWeek 1 10,000
BlueWeek 5 9,000
BlueWeek 3 14,500
YellowWeek 5 3,300
GreenWeek 2 1,000
YellowWeek 4 30,000
Week 1Week 2Week 3Week 4Week 5
Red
Yellow
Green
Blue
Purple
TOTAL
I have ~500 rows of data in columns A, B, C that is as follows, for example:.............
I am having trouble with coming up with a formula that will add up the total items shipped for each item. For example, Apples = 62 items shipped.
I have a workbook containing 120 sheets. Each sheet contains a column labelled "Subject", and a row below labelled "Totals:" with a numeric value in the intersecting cell.
I need a formula that will total the value in all these cells on the last sheet.
The trouble is, the cell address of the intesecting cell fluctuates somewhat from sheet to sheet because the column and row for the "Subject" and "Totals:" are not always the same.
******** ******************** ************************************************************************>Microsoft Excel - Book1.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF30=
ABCDEFGHIJKLM5**Check*Date*01/05/2007*to*09/28/2007,*Job*616003*to************6**6440009,...,Job#*642010*-*HEATHER*GLEN@MONUMENT*BO************7*************8***Record#****Check#**Period***Employee*****9****Comp*Code*********Hours**10*************11*************12*************13*Totals*by*Comp*Code:*************14*Comp*Code*************15*****Hours****Wages***Overtime**Subject***Rate*16*************17*5183***PLUMBERS*UNDER*$23*************18*****19.00****376.50****376.50***11.5400*19*5187***PLUMBERS*ABOVE*$23*************20*****5.00****120.00****120.00***6.5300*21*************22**Totals:***24.00**496.50*0.00496.50**Sheet8*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I want to be able to total the "Subject" wages for codes 5183 & 5187 (unfortunately, the payroll amounts are located one row below) for all 120 sheets in the workbook.
I'm creating a spreadsheet that has:
- budgeted dollar amount
- entry each week for that week's total expense
- total expense to date
Question: how can I hold the value for "total expense to date" so that when the new week's info is added the previous total is not lost?
I am trying to write a macro that will add a subtotal in column G12:G1000 at every cell location that is BOLD FONT.
So, what I am trying to say is each time the macro finds a BOLD FONT cell it adds all numbers above it, up to the next BOLD FONT cell.
This may happen at a large number of locations in the column.
I want to consolidate the various employees' salaries of all months in a sheet. I enter salaries in different sheets month-wise and in each sheet, department-wise. Some employees get commission in various departments. Now, I need to see the details of an employee by giving his name. I should get month-wise his salary, commission and department in which he get commission, across all the sheets.
View 1 Replies View RelatedI'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
I am trying to come up with a formula that calculates total time someone has worked in a day. The scenario is an individual will work at a home and start working with an individual. Their start/end times look like this in a pivot:
Min Start Max Start Min End Max End
Location A+Counselor A 8:56 AM4:01 PM 1:11 PM 7:00 PM
Location A+Counselor B 12:00 AM 8:00 PM 6:00 AM 11:59 PM
Location B:Counselor C 7:00 AM 12:00 PM 2:00 PM 4:00 PM
Location C+Counselor D 8:00 AM 8:00 AM 4:00 PM 4:00 PM
Some people work split shifts while others work a straight shift. The formula I created was this:
=IF(OR(B9=C9,E9=D9,D9=C9),E9-B9,IF(D9>C9,((E9-D9)+(C9-B9)),IF(C9>D9,((D9-B9)+E9-C9),"New Formula Needed")))*24
(I use a pivot table to show max min for start and end times)
This works great except for the individuals that have multiple punches during the same time frame. The one scenario I am having trouble solving for is when someone punches in more than once during their shift displaying. This occurs when a counselor starts a shift working with one person but then adds another person mid shift. An example of this could be:
Location A+Counselor E Min Start Max Start Min End Max End
Consumer 1 1:00 PM 1:00 PM 8:30 PM 8:30 PM Total Time: 7.5
Consumer 2 12:00 PM 12:00 PM 2:35 PM 2:35 Pm Total Time: 2.6
Pivot says that they worked a total of 10.1 because it is grabbing the max and mins and calculating. The actual total time worked is 8.5 hours in reality.
The raw data comes in like so:
Location Counselor Consumer Start Time End Time
A A A 1:00 PM 8:30 PM
A A B 12:00 PM 2:35 PM
A A C 12:00 PM 5:00 PM
Is this solvable with a formula?
In column A I have a list of 5 Auditors labelled Q1 - Q5, 5 Coolum’s across in column F I enter in their scores as a % e.g. 80%. ...So Q1 - 50%, Q2 - 60%. In column A37-A41 I have Q1-Q5 listed, in Column B37-B41 I need to calculate the average deviation per Auditor eg. If Q1 has 2 entries of 50% and 75% return average value in cell A37 which should be 62.50%. I am trying to calculate the average for each Auditor. find attached example.
View 2 Replies View RelatedI have several files of data that are from a data logger. The data is broken up by day. Each day has roughly 43000 rows of data, at its sample rate. This has made charting the data a nuisance. Is there a way to resample the data so it fits in the 32000 points excel can chart? In the future I will set a sample rate that will keep the number of points below the 32K per series. I would like to be able to have the total number of points reduced by averaging the data not by simply deleting one of every four rows.
View 5 Replies View RelatedI worked on this macro for about 2 hours, with only partial success.
I have credit card data (will attached next post) sorted by tender type. I recorded teh subtotal feature, after selecting the data. I used teh go to, special, last cell, feature to get the end cell for selection, and also set the print area to this range. I did it in relative mode.
the macro worked, but when I also tried to insert three rows above the "grand total" cell, then insert a sub total of just master card adn visa, it in one of these added rows didn't work upon playback.
also - Can I lock the position of my macro buttons? IN properties it's set to locked but they still move when teh data changes. Can i put them on teh tool bars?
when I run my mcaro in a worksheet that has 4 different sheets , like sheet1 which I called 1, sheet2 which I called 20A and so on, ....
when I run my macro in sheet 1 I find out that sheet2 which I assigned total in it , " total is not working" , it does everything exactly how I want it except for the total, and I have to run the macro from the sheet 20a itself to have the total show for my, why is that , since all the information all shows right.
I want to know how can I get my macro to run it from any sheet in the worksheet ans still the total for each sheet ( and I do not have to go to each sheet and run it again to get the total for that sheet). my macro is as the following.
for creating the macro As I dont have any idea about macro.
My question is that I just want to marge all the tab into one tab however some header in all the tab are dirffernet however I need one header.
I have attached the example file, in that tab named as "OUTPUT" that is what I needed by macro.
I have the following macro, however I am struggling to make it work on my file:
[Code] .....
I have attached my sample. essentially i have the dec, jan etc month tabs to consolidate into the summary sheet. i would like the data to be dumped from both sheets into the summary sheets. i will be adding a feb, march, april etc tabs as the year progresses.
I would also like column A in the summary sheet to repeat the name of the sheet the data is being retrieved from.
Attached File : sample macro_issue01.xlsm
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies View RelatedI am trying to write a formula to insert in a macro for multiple lines of data.
Column B contains the date that I am comparing the date in Column C against. I want to be able to highlight the content on that row if the date in column C is greater than or equal to column B. how to write this?
Sample data:
3/12/20123/12/2012
3/12/20123/1/2012
3/6/20123/6/2012
2/29/20123/2/2012
I would need row 1 and 4 to highlight in red. this is part of a long Macro that is written and includes many other steps, but I cannot seem to make this step work correctly.
Couple of small queries that I have regarding importing data into excel from multiple webpages?
I am trying to automatically import data from this site, example page:
Greyhound Race and Breeding
The page numbers go up in increments of one, so the next one will be 3473265, 3473266, 3473267, etc
The problem is that the macro runs but nothing happens.
Further info -
I need this data to import all into one [very long!] sheet
Sub Macro1()
'
'Macro1 Macro
'
'For i = 3473264 To 3473265
With ActiveSheet.QueryTables.Add(Connection:= _
[Code] ,.........
how to copy data from two different tabs and then paste it into one? My below code opens up a workbook and extracts the appropriate data, but I also need it to extract data from another tab within the workbook that was opened.
Sub LTDexportDATA()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
[Code].....
I have a report that I drop down into Excel that is a transaction report for securities. The data for each security is in two rows. I would like to write a macro that would sort each two-line group by a certain cell in the group. If I could make the macro request the number of rows and columns in each range and the cell address of the cell to sort by, I would be able to use this macro for many different reports. Also, there has to be some way of telling the macro where to begin and where to end. I have some experience with macros although generally I "Frankenstein".
I have a spreadsheet containing a factory's operational data, with each machine in the factory being represented by its own worksheet.
The sheets all have the same structure, with each line of data representing a shift (we have 12-hour continental shifts, so column A of all the pages has the date in an standard format, and column B has either "d" or "n", representing the shift). Various datat is documented on each machine on a shift-per-shift basis.
What I need to do is figure out how to do a macro that extracts all of the lines on all of the machines' worksheets that pertain to a particular shift (for instance, all of the lines where column A read "14-Mar" and column B read "d"), and export the values of the entire row to another worksheet, creating a shift summary on one page.
To do this, I would like to make the date and shift user-definable variables that appear at the top of what would become the summary sheet, and have a button that activated such a macro at the top of the page as well.
I have: + three raw data sheets (needed as 3 lots of data with 25K records in each). + I also have a model that I want to take each record from each sheet, populates some cells in a seperate calculation sheet and then gets a result - which it adds to a total (array).Finally I have + a clever macro that shows me what % of the way through I am (i.e. displays the number of record processed out of the 75K (3*25K) total)
While I have got the model to work - there is some untidy code used where I start my clever % macro for x = 1 to 75K then repeat the same instructions for running the model for each section i.e. sheet 1 : 1 to 25000, then the same instructions for sheet 2, 1 to 25000 etc etc. and then end it I want to know if there is any clever coding that will let me go from one sheet to another when there is an empty cell struck on the active sheet?
My Problem is I have a workbook with multiple sheets with a possibility of a number between 2 and 999 occurring. I am looking for a formula that can display a table on the "total" worksheet for every ID number that has been entered and the number of times the ID number is displayed.
View 7 Replies View Related