I have three codes (P, /P, P/) that could be entered in range H5:P5. P is counted as 1; P/ and /P are both counted as ½.
I have the following formula in D5:
=COUNTIF(H5:S5,"P")+COUNTIF(H5:S5,"P/")/2+COUNTIF(H5:S5,"/P")/2
I entered the following formula for data validation:
=SUMPRODUCT(--(H5:S5="P"))+SUMPRODUCT(--(H5:S5="P/")/2)+SUMPRODUCT(--(H5:S5="/P")/2)
I need cell H18 to look at cell F4, and if the value in cell F4 is 'CFB', I need validation to limit the entry in cell H18 to the values in a named range 'pripro' to populate. That part I know how to do. (=pripro)
But if the value in F4 is CCP, I need H18 to allow anything. I'm having trouble adding this to the first part.
Is there a limit to the number of entries in a validation list? I have a list that contains about 300 entries, but the drop-down list only shows 246 entries. I am sure that the references are correct.
View 2 Replies View RelatedWhen you want to use Data Validation to limit the entry of the number of characters to a cell does this apply only to the cell that you are entering the characters or can it also apply to a cell that contains a LEN(A1) formula, for instance? Also,does the Data Validation limitation function includes spaces as well? Will the message appear while you are entering the characters (when it has reached the limit) or will it wait until you have hit Enter?
View 1 Replies View RelatedCan I limit the text length in a cell that contains a formula? You may say "Limit the text length in the input cell". That can't be done because the formula in the resultant cell takes text from two other cells in addition to the input cell. I need to limit the overall text length to, let say, 50 characters.
View 7 Replies View RelatedI have a section of my program that asks for board scores (point value is 6-10 in increments of .5) I have set up a data validation so that users can only enter those specific values. Problem is, none of the values can be more than 1 point from each other. (the part I have yet to figure out)
Example, if the first value is a 6.5 the second is 7.0 and the third is a 9.0, I need the data validation to display an error because the 9.0 is beyond the one point spread.
Summary: Display an error message if any of the points are more than 1.0 point from another.
have created a list obx using data validation. My question is, is there a way to limit the data available on the list.
Example: sheet 1
A1 A2 A3
Address A
address p
address s Date
Sheet 2
has data validation list that consists of all of A1 a named range called "address". Everything works great.
I now want to be able to limit the available choices in the list depending on what cell the user is in
example: if user is in sheet2 a1, i only want them to be able to pick address that have an "A" or "p" in cell A2 on sheet 1
I tried to acomplish this using conditional formatting, I format my named range with different colors, but the colors do not carry over to the data validation list on sheet2.
I require a custom data validation formula to limit cell value to maximum of 4 decimal places.
0.0001 ok
0.02 ok
0.3 ok
0.12345 fail
0.123456 fail etc
I am creating a worksheet as we have collect client satisfaction surveys. I have created a worksheet with each question at the top of the columns and the answer (yes or no) with data validation. I input each survey into a new row. I now would like to total how many people answered Yes and how many answered No. What formula can I use to total the answers?
View 6 Replies View RelatedI am trying to define/name a range in vba. The range will always start in the same place, but as more information is appended to the data set it comes from, the more (or less) rows it can populate. I want to limit the length of the range because I am using it in a data validation drop down list and i do not want to see all of the blanks at the bottom of the list.
Checking the "Ignoe blanck cells" box in data validation did not make the spaces disappear, probably because there is data in an adjscent column that goes much further down the worksheet.
My current vba is:
ActiveWorkbook.Names.Add Name:="Date", RefersToR1C1:= _
"=Input!R4C4:R65536C4"
I want it to be the range that would highlight if I placed my cursor in R4C4 and hit Ctrl+shift+Down Arrow
I have an Excel file that is 590 MB and Excel is telling me that since there are over 1,048,576 rows in this file (which I understand is the row limit for Excel 2010), it will only open partially, up to that row amount.
Excel suggested I open up the file in Word, but that has been unsuccessful - Word gives me error messages and won't open the file. I've also tried converting the file to .rtf and .odt, but again, that doesn't work.
Is there any way to break this excel file down? I'm assuming that whoever created it could not have made the document more than 1,048,576 rows, if that is Excel's limit, but maybe I am wrong. The document is in date order from 2008 to 2011, but only 2008 will show, and I know the later years exist. It doesn't matter to me which program this file opens with, I just need the data.
On worksheet 1 I have Column A with a list of names, which we shall call John, Paul, George and Ringo, listed randomly within 100 cells (A1 - A100).
I have Cells B1 - J100 with 3 options in each cell; Blank, C and NYC.
I need a list on worksheet 2 for each individual person showing;
(1) total number of cells marked C
(2) total number of cells marked C & NYC combined.
Is there any way to use a Named Range in the "Source" field in a Data Validation? I have multiple sheets in a workbook that have the same layout, and I am using alot of different Data Validations. My problem is that whenever I need to change, or add a choice to one of these, I have to go to each sheet and change the Data Validations that are effected by that change. Is there a way to use a "Named Range" or something to put all of my acceptable choices, for that Data Validation, in one spot. And make any changes I had to that field.
View 2 Replies View RelatedIn Sheet2 I have list:
columnA (name)
ColumnB (region)
Audi
Euro
Ford
USA
Chevi
USA
VW
EURO
Porshe
EURO
I used manager name to define range:
Cust_Name = Sheet2!$A:$A
Reg_Name = Sheet2!$B:$B
Now, in Sheet1 I did data validation and I have:
A2 = list of name (from Sheet2, columnA)
B2 = list of region (from Sheet2, columnB)
How to do, like if I in A2 I will choose Audi or Porshe then automatically in B2 will show Euro?
In need data validation in a range of cells (lets keep it to A1 for the example please). The data being entered is a 9 digit number, which needs to satisfy the following:
The 7th and 8th characters should be equal to an even number and be greater than zero, but less than 35.
Example 1: If 123456789 is entered in the cell, this would return an error because 78 (although being an even number) is above 35.
Example 2: If 987654321 is entered in the cell this would be allowed as 32 is an even number and less than 35.
I have a cell for which I need the only options for data to be entered from a list in two different tabs from which I understand cant be done but is it possible to have two drop down options for the same cell?
The attached spreadsheet should explain this slightly better...
I have a monthly report showing actuals and budget for current month (or quarter) and year to date. Range names have been created for (1) each month, (2) each quarter and (3) year to date). I'm using the SUMPRODUCT function to extract information by account. For example:
=SUMPRODUCT(($A9=ACT_Account)*(ACT_Jan))
This formula works except I have to replace the "ACT_Jan" each month accordingly. Can a data validation list be created with the range names so that updating this formula monthly can be simplified? For example, changing "ACT_Jan" to "ACT_Feb" with a drop down list.
I have a range (offset based) which may increase by rows or columns whenever necessary.
In that I have data table like this:
HUNONETWOTHREEFOURFIVESIX
100110021003100410051006100
200120022003200420052006200
300180028003800480058006800
400140024003400440054006400
500150025003500450055006500
In the above table I want to enter in another column or row, a number which is not available in the given table (i.e. no duplication is allowed). (This table may grow both column & row wise). If, duplication is there the message box should say that the value already exist. And, if possible, the existing value can be colored with any color, so that we can easily find out where it is.
1) how to name a offset table and
2) how to avoid duplicate value when entered? Is data validation is one solution?
On the Control Panel sheet of the attached book, I need to load only the non blank cells from BQ3:BQ9 into a data validation drop down.
View 8 Replies View RelatedI have several cells with data validation's drop Box. Every data validation uses a range name as source (myColorList). Here goes the hard part: I need a new value inside the dropBox list, but The problem is that I can NOT modify the "myColorList" range.
-- Is there any way to build up the dropbox source using the range name and the new value? Something like
If I have two cells and a named range mexico
A1, A2.
A1 contains the string: "mexico"
A2 is the cells that has required data validation (drop down list).
I want A2's validation reference to be dynamic, in the sense that I can it reference it to A1; converting the string "mexico" to a named range mexico
I tried inputting = INDIRECT(A1) into A2
But I lack clarity in my understanding of referencing.
What is the correct procedure here.
Basically in cells b12:b26 (15 cells) I need to enter the type of item (which is limited to 2 items). I made a drop down list for that range which works perfectly, therefore the user can choose either item 1 or item 2 or blank. However, I need to figure out a way so that item 1 can be chosen a maximum of 10 times in the range, and item 2 can only be chosen 5 times in that same range..
I am assuming that you can't add that condition to the drop down list... So I was thinking of adding an extra column duplicating b12:b26 (c12:=b12 etc...)- and entering a data validation there.
I was going to enter the following:
if item 1 is chose : =NOT(COUNT($c$12:$c$26)>10) &
if item 2 is chosen: =NOT(COUNT($c$6:$c$6)>5).
However, for some reason it doesn't work - it doesn't block the entry if I try to enter 11 item 1s or 6 item 2s.
I have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
I have a list of names I used in data validation (dropdown list)....I need to add more names to the list....What is the best way to change the range to include new listings? Is the offset function suitable for data validation? How do you use the Offset function in data validation?
View 2 Replies View RelatedI'd like to create a list via Data validation-list. Anyone knows how to reference a range on another sheet of the workbook?
The range is =$Q$5:$Q$13
Is it possible to reference another sheet? If yes, how is is done?
I am using following code to apply data validation list. However this code gives error Intermittently. The error message is 'Application defined or Object defined error'. Also this code looks little cumber some. Will really apprciate if any one can put some ligh on why is this error appearing sometimes. Do I need to change something in the code or add few extra lines. I feel following points will be necessary when you check my code
1. The data of validation list is stored under the column heading 'Reported_By_List'
2. Validation is applied on the range under the column heading 'Reported Through'
3. Start and last Cell Address Of the cells of the column in which data of validation list is
stored are extracted into the variables 'StartCellAddress1' & 'LastCellAddress1 '
4. Start and last Cell Address Of the cells of the column on which data validation will be
applied are stored are extracted into the variables 'StartCellAddress2' &
'LastCellAddres2'
Sub Validation1()
Dim wsName As String
Dim RValue As String
Dim WorkBookName As String
Dim StartRow As Integer
Dim StartColumn As Integer
Dim LastRow As Integer
Dim CellAddress As String
Dim ColumnAddress As String
Application. ScreenUpdating = False
WorkBookName = ThisWorkbook.Name
wsName = ActiveSheet.Name...........
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View RelatedThis may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I've set up a Named Range that refers to an array of constants, e.g. MyRange ={1,2,3,4,5}. This appears to be fine since I can output the named range to a range of cells in a row (e.g. A1:E1) and see 1,2,3,4,5 (one value in each column).
I'd like to use MyRange as the source for a Data Validation list in a cell.
Normally data validation list sources must be vertical, so I've set MyRange =TRANSPOSE({1,2,3,4,5}). This appears to be fine since I can output the named range to a range of cells in a column (e.g. A1:A5) and see 1,2,3,4,5 (one value in each row).
When I set MyRange as the source for data validation however, it resolves to an error.
why this setup doesn't work?
Workbook detailing the problem attached. Attachment 273788 NamedRangeDataValidationArrayConstansts.xlsx
Data Validation setup: "Allow" is: List "Source" is: =$E$12:$E$15
D___E____F
12__CA__CASH
13__OT__ONLINE TRANSACTION
14__DD__DIRECT DEPOSITE
15__AW__AUTOMATIC WITHDRAWAL
The codes in E column are what is entered in a worksheet range (user cannot see the list). Needed is to show both the two-character code in column E and the text definitions in column F in the dropdown. As data validation now works, users only see the two-character code and are not remembering what the code stands for - they need to see the definition.
Is there a way to show both the two-character code from column E along with the text in column F? When user selects, only the code would be entered in the target cell. (Is data validation the correct technique?)
I have set this problem up in closely located cells to construct the issue. In reality, the validation list is well off-screen from where the user is actually inserting the codes and there are many more codes/definitions.