Vba To Select Colored Tabs And Hide Empty Rows Within Range In Each Tab?
Jun 23, 2014
I need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
I have about a dozen tabs, all of which have vlookups in them and calculate based on what a user pastes into Sheet 1. I need a macro that hides all tabs that have no data, essentially tabs where A1 = ""
However, it also needs to unhide tabs as soon as there is data. So if the user pastes new data into Sheet 1 the vlookups, on the other sheets, still need to run (even if they are hidden) and then check against the macro to determine whether to be hidden or unhidden.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
Im looking for a macro that hide empty rows. I found some simple macro but that are long to execute. While looking for a faster code, I found two codes that work pretty fast. But as I don't understand VBA I am not able to adjust them to my situation.
First macro: I am able to specify my range (B6:B77), but the macro applies to blank cells and I need to apply to "" cells.
[Code] .....
Second macro: very fast as well. Here, it applies to "" cells, but I am unable to specify a range. So the rows 1 to 4, which are empty, are hidden but should not.
I have read other posts about this but I am still a little confused as most macros that have been made are tweaked to suite the users individual needs.
What I want is something like this to work in the active sheet:
If cells D2:D55 = "" Then Hide.EntireRow
If cells D2:D55 = "has any value" Then Show.EntireRow
The values in D2:D55 are populated by a VLOOKUP depending on what someone chooses in a drop down validation list, however not all the rows are always required so I would like to hide them to save some space on my form.
I am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows() On Error Resume Next With Range("B1:B300") .EntireRow.Hidden = False For i = 1 To .Rows.Count If WorksheetFunction. Sum(.Rows(i)) = 0 Then .Rows(i).EntireRow.Hidden = True End If Next i End With End Sub
My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
I have a workbook with over 70 tabs whose position shouldn't be changed. Some of these tabs are colored in yellow (sorting by tab color is not allowed). I need to select these yellow tabs first and loop through them (only yellow tabs) and hide empty rows in the range of A1: G 50 on each of them. Grouping sheets wwon't work because each tab has different last row with data within that range.
Is there a way to select completely empty rows in Excel 2007 (Win 7)? I have found directions for highlighting empty cells (f5, Special, Blanks...), but sometimes the cells selected will be in rows with other filled cells in them so that doesn't really do what I need.
How do I select all the Columns and Rows that are not being used so that I can hide them. I like the blue background it gives when they're all hidden. I am using Excel 2007 and it's not too bad selecting all the columns but there are just way too many rows.
I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.
I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
i need a code that will find the first empty cell in column "H" then select go down a row and select upto column "R" so in example range ("H2:R3") would get selected.
I am lost this is all i have so far and it doesn't work
I am blocked in a situation. I want to hide rows if they have two conditions - Col 2 must have a value (A, B, ..., G) and Col 92 must have a zero value.
I've tried the code below but it doesn't work - It hides all rows in range with zero value in col 92 and with no value in col 2. What's missing or what's wrong in the code?
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB: Public Sub DelRows2() Dim Cel As Range, searchStr, FirstCell As String Dim searchRange As Range, DeleteRange As Range
I get a macro which will provide me coloured data by eliminating the non-cloured(with white) data. Sheet1 has a combox of worksheet within an excel sheet which is listing all the worksheet in an excel sheet.By selecting the worksheet name(for example sheet1, sheet2.....sheet26) and I can move to worksheet I selected and can view the data(coloured one).I have around 25 excel worksheet within an excel sheet and each sheet has various different kind of colors but I dont want the output to show non coloured data after I select the worksheet in Combo box.
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
I am trying to delete all the empty rows in a range. What I currently have deletes the rows but skips over a lot as the code runs. Below is what I currently have.
Code: 'msgbox delete blanks??? If MsgBox("Are you sure you want to delete ALL the blank rows in the chart?", vbYesNo, "Delete Blanks?") = vbNo Then Exit Sub
I have read all the tutorials and examples of how to delete rows IF the row contains no data within a worksheet or workbook.
I don't want all rows deleted, just rows within a set range. I can't find any reference to deleting blank rows within a range, just the entire workbook or worksheet.
I am not sure of the VBA code to delete enitre row if a cell is empty only within a range, then Ascend according to that Row's Values and show the Rank No's only on what Rows that remain.
Can't seem to find a solution searching through various forums searches. I would like to hide all blank rows within a Named Range : Range1 (A1:E8).............
I have this code (compliments of VBA Noob) which hides all blank rows within a range ("Range1") P16:V650. It works great in a new worksheet with little amount data, however within my heavy worksheet, it takes over a minute to compile.
With my searches i manage to make this working code:
Code:
Sub Hide_Rows() Application.ScreenUpdating = False Dim Rng, os1, os2, os3, os4, os5, os6, os7, os8, os9, os10, os11 As Range Set os1 = Range("B11:E63") Set os2 = Range("B64:E116") Set os3 = Range("B117:E169") Set os4 = Range("B170:E222")
[Code]...
In any range (os1 to os11) all empty rows are hidden... ok! But, every range have 2 first rows as headers that i want to hide (in case of no data below) before print!
