i want to creat a sheet doing the following
enter the phone numer in cell a1
enter the phone break down hour in cell a2
enter the phone break down date in cell a3
combine the cell a2 & cell a3 in cell a 4
enter the phone fixed hour in cell a5
enter the cell fixed date in cell a6
combine the a5&a6 in cell a7 subtract a7-a4 and show the result in hours
Is there a formula that can be used to combine a date and a time that will be formatted correctly?
For example if I have the following values:
A1: 08/03/12 (Date)
A2: 16:45:39 (Time)
And then I want A3 to be 08/03/12 16:45:39 as the Date/Time. Can this be done with a formula?
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedI am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971
I have a Excel Dates & Times column where the time is not always used. In these cases the time is 12:00AM. Is there a way to Custom Formats the cell so that the time is only visible if it is not 12:00AM?
View 6 Replies View RelatedI have a problem regarding sorting data having date and also time within a single cell.
Example data (I have written it as code to preserve formatting)
A B C D E F
12/5/2008 02:072/5/2008 06:0128804833363
22/5/2008 18:012/5/2008 18:0599271297
Column B is start date and time whereas Column C is end date and time.
My aim is to cut and paste the whole row automatically to Sheet2 if the time is within 2AM to 8AM else leave as it is.Also I don't know anything about VBA Script.
I have a spreadsheet where an engineer is expected to record sample temperatures of water outlets, along with the time he took the sample. Each outlet has a row on the spreadsheet with a column for the Temperature and column for the time. I would like to automatically input the current time(or time and date) on each line as the temperature is entered.
View 4 Replies View RelatedI am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies View RelatedI need to subtract the time alone as per below example:
Cell A : 2/4/2014 8:58:13 AM
I need in Cell B as : 2/4/2014 8:46:13 AM (Minus 15 minutes)
How to get this?
I have data exported from a defect management tool (that reports all the defects that have been recorded in the defect management system). This data has unique columns for name of originator, defect ID, date originated, priority, etc. The date originated column has the date and time. I want to create a report that tells me how many High, Medium and Low priority defects were created on each date - and I am using a pivot table to do this.
However, because the date column is actually the date and time the defect was reported/recorded, the time element of this is making all the dates unique eg, I have three defects recorded on 29/01/2009, a High priority defect (reported at 29/01/2009 12:23) and two Medium priority defects (reported at 29/01/2009 13:02 and 29/01/2009 13:32). My pivot table is showing each date as a unique date - with a count of 1 against each, whereas I want to see 1 date entry (for 29/01/2009) with a count of 1 against High and 2 against Medium.
I have tried custom formatting the date column to dd/mm/yyyy - which appears to work in the data (but doesn't in the pivot table, because the time stamp is still there, just not visible). I have tried copy and paste special [Values] (on the custom formatted date column) -but the time stamp is still there. I have tried formatting the date column to "General", but this changes the dates to the number format - eg 29/01/2009 12:23 becomes 39842.5166203704.
I have tried inserting a new column and using the =Left function for the first 10 characters of the cell (ie the 29/01/2009), but that gives the first 10 characters of the number form of the date, ie 39842.5166. Basically, without going into every date cell (and I have thousands) and manually deleting all the times, how do I quickly change the date column into just having the date in it (ie how do I strip off the time element)?
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
View 4 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have several hundred rows of date/times which I need to modify just the date (for example 08/23/2007 11:00 to 08/15/2008 11:00). Each row may have a different time so it is just the date I'm targeting for change.
If I manually use the replace dialog, replacing 08/23/2007 with 08/15/2008 works just fine. However, if in code I attempt to use the Cells.Replace function, it does not locate any data to change.
I have found that if I search for the string 8/23/2007, the dates are located and changed. Only when I attempt to find the fully formatted date 08/23/2007 does the function fail.
Date:31-Oct-06 (the date is in cell A3)
Formula: "as at"& " "&A3
Result: as at 39021
I need the results to be "as at 31-Oct-06". Is there a formula for this??
I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI need to combine the time scattered in different columns and align them daywise.
View 3 Replies View Relatedwhat the easiest way is to combine date and time into one column. Concatenate? What format do you give the combined date and time column after you group them? Below is what I need to do:
Date Time Combined_Date_Time
01/01/2008 06:05:42 01/01/2009 06:05:42
I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedWhen a cell changes i would like the cell in the next column to record the date of this change. After achieving this i want to set up conditional formatting to compare this date to the current date and if they are the same then change the original cell's colour to show it changed today!
I started using the code below (from ozgrid) which was working fine BUT my cell value in column A is actually taken from a different column. when the different column cell value changes my cell in A changes but the script below does not seem to see this as a change. it only records the date if i physcially change the cell in A rather than another cell prompting it to change.
based on my overall objective and my plans to date please can someone suggest a solution?
current code below....
I would like to have people enter text in the cells in column A and record the Date and Time they did it in the same cells in column J.
I have tried (in cell J1) If(A1<>"", NOW(),"") but of course the problem is that it keeps updating to the present time. I tried using INT(NOW()) but that doesn't work
I know I could simply Copy and Paste Special over each cell in the J column but that seems terribly inelegant.
formatting the date and time together in one cell. I copy the date and time from another program and I'm pasting it into a single cell within Excell. This is was the date and time looks like from the other program. 2013-09-03 03:20:30.0 I need it to look like this in Excel in a single cell. September 3, 2013 3:20 AM
View 4 Replies View RelatedI have the code that will allow me to enter a time into a cell beside the changed data. How do I alter the programming to update a specific cell when a range are changed.
I.E when a monthly update is changed in cells range c75:C100 how can I get the latest update box at A1 to change.
I'm looking for a way show the username of the person who last saved the spreadsheet, and the date & time it was saved. I would like to be able to ouput this data in certain cells on the worksheet. I have tried using something like:
View 2 Replies View RelatedI have an excel worksheet to display all debtor amount and create date.
When the create date compare with system date which is over 90 days, the debtor amount will be deducted and bad debt amount increased.
How should I use VBA to work out this? The debtor and bad debt are in 2 worksheets.
I have a problem when i try to format a cell. i download data from a website and it gives me the date and time in the first column, ex. 1/1/2009 5:00:00 pm. when i format the cell to date, the time is erased and the date remains which is what i want, ex. 1/1/2009. however, when i click on that cell or any other in that column, the display above, or "insert function" line still show the contents of the cell with the date and the time, ex. 1/1/2009 5:00:00 pm. is there any way i can change that so the time is erased and only the date remains, ex. 1/1/2009 when i click on the cell?
When doing weekly scheduled in excell, is there a way to record a start time and an end time in the same cell and then have excell total hours scheduled from data entered into that one cell.
View 4 Replies View RelatedI am not sure whether this can happen, I want to capture time taken for different activities, without manually entering the details.I tried the formula "=Now()", but what happens is that at the end of the day the times are all the same because the live time is changing. Is there a way where the live time is captured and freezed, so that at the end of the day i have a time log sheet.
View 9 Replies View Related