what the easiest way is to combine date and time into one column. Concatenate? What format do you give the combined date and time column after you group them? Below is what I need to do:
Date Time Combined_Date_Time
01/01/2008 06:05:42 01/01/2009 06:05:42
sample1.xlsx
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
21045
21022
21054
20214
20114
I would like to know how to combine many cells in a column - sometimes 100's - into one cell separated by a comma without having to type each cell name using.
I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
[IMG][/IMG]
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
i want to creat a sheet doing the following
enter the phone numer in cell a1
enter the phone break down hour in cell a2
enter the phone break down date in cell a3
combine the cell a2 & cell a3 in cell a 4
enter the phone fixed hour in cell a5
enter the cell fixed date in cell a6
combine the a5&a6 in cell a7 subtract a7-a4 and show the result in hours
I need to combine the time scattered in different columns and align them daywise.
View 3 Replies View RelatedIs there a formula that can be used to combine a date and a time that will be formatted correctly?
For example if I have the following values:
A1: 08/03/12 (Date)
A2: 16:45:39 (Time)
And then I want A3 to be 08/03/12 16:45:39 as the Date/Time. Can this be done with a formula?
I have a spreadsheet that requires a formula in column "e". How can I automaticlly extend the formula each time data is entered in column "d" of the next row.
View 7 Replies View RelatedI have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
I have two columns B & C
in B Column the content is a date (2/26/2014) and in my C column is time ( 4:17:47 PM)
I'm trying to combine them in D Column with a formula: =B1 + C1. but it giving me a result #Value!.
I know I did this before, but I don't know now why its giving me error.
I've got a good-sized single sheet workbook (A1:I8851) that I need a fairly complicated (seems like it to me, anyway) macro to get data in line from column to column. Here's what I've got:
Column A is titled "Category", and Column D is "Description". The actual category listings are in merged cells, spanning anywhere from 5-12 rows. Column D has no merged cells, but many (not all) cells in D contain data carried over from the cell above it (instead of wrapping the text, for some reason it just inserted into a new cell). The number of merged cells in A is equal to the number of unmerged cells in D.
I need a macro to combine each of the multiple rows in D into one single row, stopping and starting over when it reaches the next Category row. That way each category will have a single description line without incorporating parts of the description from the category above or below it.
I have individual date columns with calculated field in the next column, and this goes on for the rest of the worksheet. Example,
Column Header H to N consists of dates ranging from 2/24/2014 to 3/2/2014.
Column O will be the new column.
I want to change the new column header with the combined dates in the first column and the last column , i.e. the column before the new one, with a "To" text in between these two values. That way it becomes easy to identify the new column headers which are supposed to be week-wise.
So, for this example, it will be Column O = "2/24/2014 To 3/2/2014"
i.e. Column O = "Column H1" To "Column N1"
I have 2 columns "H" and "I" from line 6 to 409. Each cell may start with AR , MA or a number. If cell H6 starts with AR I would like to put that cell into B6. If H6 does not have AR then I would like to check I6 for AR, and put that into B6 if it's found. If I don't find AR in either I would check them both for MA, and write the cell that finds MA into B6. If the AR or MA are not found then I would want it left blank. I did try
IF(FIND("AR",$H7,1),$H7,IF(FIND("AR",$I7,1),$I7,IF(FIND("MA",$H7,1),$H7,IF(FIND("MA",$I7,1),$I7," ")))) in B7.
i need to take all cells in column A with values and all cells in column B with values and combine them into column C so i can sort and subtotal. Columns A and B may have 2 values or 2000 values.
View 10 Replies View RelatedI have a column of data that will vary in length and I'm trying to write a macro to combine it all into one cell. Basically I need to do the equivalent of entering "=A1&A2&A3..." for the entire column. I started by creating an array string variable and have the data in grp() but now I'm stuck trying to figure out some sort of loop to keep adding onto the same cell or something
View 6 Replies View RelatedI have 100 columns in 1 worksheet, each column has 200 rows, I want to combine all these columns into a single column.
Therefore, Column 101 or a new worksheet Column 1, will have 20000 names.
I need two solutions, if possible. One macro and then a "poor man's way" in case the macro breaks down the road. something where I can do it with copy/paste, formulas etc.
I will just use letters and numbers to make it easer.........
Column A might have 10 rows, with 1,2,3,4,5,6,7,8,9, and 10 as the data.
Column B might have 7 rows with A,B,C,D,E,F and G as the data.
I need column C to have 70 rows, with 1A, 1B, 1C, etc. .......through 9E, 9F through 9G as the data.
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
I'm trying to combine multiple columns into 1 column in Excel. I've searched a few places but most of them are tailored for a specific sheet and my VBA skills are elementary
My table looks like this (there could be more than 5 columns... it's somewhat dynamic based on the data given). Note that some columns could have no data, and the size may be different, some have 100 rows of data, while others have 5.
Firm A
Firm B
Firm C
Firm D
Firm E
[Code]...
I want to combine these columns into
Consolidated
A
B
B
C
D
E
[Code]...
Is it possible to do this with an Excel formula? If not, a VBA code
I have a unique id in column A on a sheet with 20,000 contacts. I need a VBA script to loop through the worksheet and when it sees that there is a duplicate in column A, it needs to take the data from columns B, C, and D of that duplcate and copy them to the first blank cell at the end of the original record. Then it needs to delete the row that contained the duplicate that it just copied. I have searched and found parts of code that will do some of these, but I can't get anything to work, I don't know VB enough.
View 4 Replies View RelatedColumns A, B, C and D contan a list of Names, I want to be able to in column E list all the items in A,B,C and D with out duplicates. How would I do this?
View 1 Replies View RelatedHow can i merge all the columns from Column D to Column Y in Column Z. The seperator between the Columncontents should be numbers in format "<<1>>" for column D, "<<2>>" for column E,"<<2>>" for column F........
i have a wordlist(arabic from right to left lanuage) containing words and meanings. Column A contains Words, Colulmn B contains Transcription, Column C contains Grammer information and the following Columns up to Column Y contain of Meanings.
!!!The meanings start with Column D which is then followed by E,F,G... Y. If any column cell is empty then it would mean, that the following cells of corresponding columns are also empty. For example if Colulmn D has content but Column E not, then it means that F,G,H...Y are also empty!
1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis
Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA
2) I use the Match and Index formula for both sheets
the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")
for column B in sheet 1
=If(Or(ISERROR(MATCH(sheet1_DataLookup,$A5:$A65536,0)),sheet1_DataLookup=""),"",INDEX(B5:B65536,MATCH(sheet1_DataLookup,$A5:$A65536,0),1))................
I am building a rather good size userform. It is getting really lengthy code-wise because I want certain things to be enabled and disabled on the form as they click on certain options.
I know I can hard code the lines but so I am trying to come up with some coding elements where I will not have to add 20+ lines of code for everytime I want to add a new feature.
Here is one of the functions that I have, There is going to be several of these:
Private Sub chkMore2_Click()
If chkMore2 = True Then
cboProtocol2.BackStyle = fmBackStyleOpaque
cboApplication2.BackStyle = fmBackStyleOpaque
txtLowPort2.BackStyle = fmBackStyleOpaque
[Code] .......
So If I click chkMore2 ... all of the 2nd elements will be editable. If I click chkMore3 ... then all of the 3rd elements will be editable, etc. etc.
So I tried to play with this code example:
Private Sub CheckBox1_Click()
If CheckBox1 = True Then
Call Changeit(1, "yes")
Else
Call Changeit(1, "no")
[Code] ........
Excel 2007 does not like the .concatenate element.
I have a list of companies and employees, if a company has more than 1 employee listed, I need to combine all instances of the employees into 1 row per company separated by a comma.
OLD FILE: Sample.xlsx
NEW FILE: Sample.xlsx
I have a wookbook with serial numbers in column A and barcodes in column B. There are 51940 rows in total.
Is there a way I can search through column A, and for each unique value found , concatenate all of the barcodes that relate to that serial number in column C?
Serial Numbers | Barcodes | Combined Values
-------------------------------------------------------
abc123 abc12300 abc12300,abc12301, etc etc
abc123 abc12301
def456 def45600 def45600, def45601, etc etc
ghi789 def45600
i am using Excel 2010.
I am having troubles finding a row number, using it to specify a range and then counting the cells containg values in that range.
This is what I have
Code:
Private Sub TextBox1_Change()
Dim test1 As String
Dim FoundRom As Range
Dim i as String
Dim abc1 As Range
Dim Core1 As String
test1 = TextBox1.Value
[Code] ........
I am thinking that I have my "Dim"'s wrong or something but I cant figure out how to define the range including the found row number and then count the number of cells containing data within that range...
I would like to know how to combine multiple cell value from each column to create a unique value. for example column A will have values (a,a,b,c,d,e,e,f,i,j) and B will have (1,2,1,1,3,4,5,5,6,7) and C has ( xxx,yyy,zzz,xxx,yyy,zzz,xxx,xxx,yyy,zzz).
i need to create a list of unique possible combination of data into column D.
I have placed below example and how to create a similar code and what functionality does this.
A
A Code
B
B Code
C
C Code
D
D Code
[code]...
I searched and searched and I can't find an easy way to do this without using Access which I am rubbish at. Is there an easy way to do the following in Excel.
I have several thousand records by row each with a unique numerical identifier. The unique identifier is the "Household". Within the household there are sub "Accounts". The sub accounts are truely unique. All the "Accounts" are in the same column.
What I am trying to do is combine the records into one row per "Household" with the accounts listed in successive columns. The maximum number of accounts there may be is 7 but it can be as few as 1. Example:
BEFORE
HH Acct
1 1234
1 2345
1 3456
1 4567
2 9876
2 8765
3 1113
4 5556
4 4447
4 3335
AFTER
HH Acct1 Acct2 Acct3 Acct4 Acct5 Acct6 Acct7
1 1234 2345 3456 4567
2 9876 8765 8765
3 1113
4 5556 4447 3335