I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?
View 3 RepliesIn my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
View 3 Replies View RelatedNeed a formula for counting how many consecutive cells where the value is gretaer than or equal to +1
For example 1,
J18 = 7
K18 = 9
L18 = 3
M18 = 2
N18 = 8
O18 = 1
P18 = 8
Q18 = -17
In the above example the result would be 7
Example 2:
J12 = -22
K12 = 9
L12 = 4
In the above example the result would be 0 since the 1st value was -22
I want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.
I would like some code in VBA
I'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)
=$AC3>=TODAY()
i have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?
View 4 Replies View RelatedHow do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.
View 3 Replies View RelatedIf A7 is equal to and greater than 95% than B7 is equal to "A". If A7 is equal to 91% but less than 94.99% than B7 is equal to "B"...
View 4 Replies View RelatedI'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:
Code:
=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=
I am looking for a function like MATCH if the match type were set to -1. However my data is sorted in ascending order. I am mining data from a Pivot Table, and it has dates across the top. Of course the pivot table will have the data sorted in ascending order from left to right. I want to find the first date that is greater than today. With weekends and holidays I can't just use TODAY()+1. Is there a function that can do what I am asking? Also I do not want to change the pivot table itself.
View 9 Replies View RelatedI need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.
I think it would be something like:
SUMIf(H40>"32",
I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...
View 9 Replies View RelatedMy current project involves sorting a spreadsheet, selecting specific qualifying data from the sheet, storing it into a variable, the pasting the individual values from the list into individual cells on a different sheet within the same workbook. Here is the code I have so far...
Code:
Sub Test()
'' freeze screen updating to remain on main worksheet
Application.ScreenUpdating = False
'' move to Avaliable worksheet
[Code] ..
When this code runs the first item in the list pastes into Sheet10 A1, but no other values from the list are placed into Sheet10. Previous to this I had been using a variation of this code to push the list into a combobox list within a userform. In that case instead of
Code:
ThisWorkbook.Worksheets("Sheet10").Range("A1") = x
I had
Code:
Combobox1.list = x
And this worked perfectly; creating a list within the combobox (in fact I can use this modification to interrogate my code to determine if the list is being properly generated, and it is).
How can I count the number of cells in a range that contain values that are greater than or equal to zero?
View 2 Replies View Relatedi'm trying to create a markscheme progress sheet.
You take a childs actual age in months and years (ie 9.8 for 9years and 8months). They then, in theory, should be at that age level for reading and spelling.
I have the age in B4, the reading in C4 and the spelling in D4. If i use CF to say i want C4 to be red if it's less than B4, Amber if it's the same and green if it's over, as soon as i okay it, C4 goes amber, because it's equal to B4, which is blank. I can get the colours to work, i just can't figure out what to put to turn the amber off when cell B4 is empty.
I've tried as many combinations as my little amount of excel knowledge can cope with.
I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.
View 9 Replies View RelatedI'm trying to count all cells in a row after the last number that was greater than 0. See my example spreadsheet. I have put the answers that it should be in to show what I'm after.
[URL]
Starting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.
View 4 Replies View RelatedI am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?
View 9 Replies View RelatedI have two columns of data in col A and col B
I wish to count the number of cells in col A that are greater than a defined value in col B.
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View RelatedI'm trying to create a formula (in Sheet 1) that will return the most recent number of cells containing a value (i.e. not empty) in Sheet 2 Range AD2:A367 greater than zero.
I've tried using COUNTIF but that only adds the individual values, it doesn't 'start from zero again' when a zero value appears.
Cell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
I have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.
View 2 Replies View RelatedSheet 2 contains the following:
Column AH2:AH367 represents the current year and contains values from Jan 1 to Dec 31 inclusive, some of which are zero and future values are blank.
Column AG2:AG367 represents last year and contains the same and all cells have a value (some are zero).
The date column is A2:A367 (the columns in between are all the years prior to 2013).
I need a formula that counts the total number of cells with a value greater than zero for the range AG2:AG367 up to and including today's date to be returned in cell A1 of Sheet 1.
I currently, manually create my production work orders using excel (in-house ERP system not good enough).
Rather than manually type in the names of products to be produced, I would like to have the number 1 = a production item and 2 = another and so on.....So basically when I type 1 in a cell it will automatically display a production item.
I imagine this to be a process where i would type all the names of my production items in individual cells, then create a formula to make 1 = a specific cell, 2, 3, 4, etc.....
If square A1 says deposit account and c1 has a figure in it, i want g1 to repeat the figure,but if a2,a3 etc says something other than deposit account i want g2,g3 to remain blank.What is the formula for square g1etc?
View 9 Replies View RelatedSUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
I have a lot of cells containing numbers. Some numbers are small, some are big.
I want to divide all numbers which are greater than 300 by 1000.
IF cell A2 > 300 THEN divide by 1000.
How to do that? Is it possible to convert value in the same cell like using conditional formatting principle?