How To Get Multiple Dropdown Lists To Populate Results In Named Cell
Sep 28, 2012
I was just given a task at the office of creating a in depth excel spreadsheet. Here is what I need:
I have one drop down list that represents the state a person lives in.
I have another drop down list that represents the the type of property it is.
If you select CA in drop down 1 and Multi Family in drop down 2 you get the end result in (specific) cell.
Then if you select AZ in drop down 1 and SFR in drop down 2 you get different end result in named cell.
How can I get items within 2 different drop down list to call up the end result in a 3rd cell?
View 1 Replies
ADVERTISEMENT
Aug 25, 2014
how best to do this (bare with me I'm not quite a pro at excel yet!). I'll attach my doc (JMP Excel Forum) so you know what I'm taking about. I've set up the data to work in a similar way to this, as you can see I've a table set up (Appliance Sheet) which feeds information to the Main Sheet which contains the drop down lists.
What I need it to do is autofill the wattage column (Main!F8 onwards) with the wattage for the device as described in Appliance!N3 or N4 for example. For the wattage column to equal 28 (equivalent to Appliance!N3) then the following would show in the dropdown selections Type>Computers SubCategory>Monitors Device>BENQ G2222HDL Status>On
Is there a way to do this with the set up I have?
I did have a previous version of the whole worksheet that each Device had its own table and I looked up the wattage using and If formula to lookup a info on the device and knowing where to look it up based on the subcategory
=IF(ISERROR(VLOOKUP(D7,IF('Main UI'!C7="Heating_Cooling",Appliances!$A$7:$B$14, IF('Main UI'!C7="Kitchen_Bathroom",Appliances!$A$16:$B$27,IF('Main UI'!C7="Monitors",Appliances!$A$52:$B$62,IF(C7="Computers",Appliances!$A$64:$B$68,........
And I got it to work but it was getting to cumbersome to add in new devices and update the formulas. If attached that doc (OLD) so you know what I'm talking about. The last two sheets are the same sheets that make up the new document (JMP Excel Forum)OLD.xlsm
I really prefer the new way I've got it set up. Its easier to add new information or options to the dropdown list
View 2 Replies
View Related
Aug 8, 2012
I have a validation list drop down box set up to reference data in a defined name list. I would like to be able to select multiple values from this list to appear in one cell (preferably separated by a comma). For example, the defined name list contains the following data:
Choice 1
Choice 2
Choice 3
Choice 4
I would like to be able to populate one cell with the following via the drop down list: Choice2, Choice 4
Is this possible and if so, how?
View 8 Replies
View Related
Sep 30, 2009
I want to be able to use list as filters that will show me results for prices I need. I have no idea how to figure this out. I attached a sample file so you can see what I'm trying to do.
View 4 Replies
View Related
Aug 18, 2013
I am trying to setup a file that has three tabs - LIST, COLOR AND PLANT.
I want to be able to select a color or colors (red, blue, yellow, green) and a plant or plants (tree, shrub, flower, grass) using radio buttons, maybe?
If i chose red and blue for a color and chose tree, shrub and grass for plants, i would like to populate the LIST tab with these items.
I'd also like to give an associated value to each color and plant. for example, for the colors, i could choose values between 1, 2 and 3. if i chose red 1, it would add "red 1" to the LIST. if i wanted to later change it to 3, i could do that on the COLOR tab and the LIST tab would update automatically.
View 6 Replies
View Related
Feb 26, 2013
I am working on a spreadsheet for my Building company. I'm building a tool to price for Fascia, Soffits and Cladding.
I'm using Macbook Pro Microsoft Office for Mac 2011
Please see attached file
The first sheet holds all the lists of products, Category Headings list is in column A and then all the relevant products and prices are then from B to BI. I have defined each category with a name by selecting the cells and entering a name in the name box.
The second sheet is a Calculator in which I would like a to have a drop down list in the Category Column (Which I have worked out how to do myself - good old google) and then a drop down list in the second column which lets the user select from a list of results based on the selection from the previous column.
Example:
Category(B3) - 18mm Fascia/Replacement Board (Square White) - Drop down menu taken from sheet 1 A3:A33
Description (C3) - Drop down list containing all the options from D2:D15 Named "FasciaReplacementBoard18mmWhite"
So basically, whatever the user selects in Column B (from the category list) a drop down list would be available in Column C
The Value column would then show a value based on the options selected.
View 14 Replies
View Related
Apr 28, 2014
I expect to deploy over 200 iterations of a workbook (templates if you will) containing a mix of up to one hundred different attributes each with its own list of valid values. My problem is the attributes don't always default to the same column in every template workbook. Therefore, to make things easier for users I would like to create attribute valid value dropdown lists on the fly using the "Valid Values' table as the source data (see the attached). Since the attribute names will be the same from one template workbook to the next, I wanted to come up with a macro that would reference a source table (a separate workbook) containing all valid values for all attributes which users would be required to download to their local machine.
See the attached example workbooks and an example of a "Valid Values" list. Here's what needs to happen: When a user opens template workbook #1 I need drop down lists containing the valid values for the attributes contained in cell B3 (User Code),C3 (Department) and D3 (Category). Likewise, when another user opens template workbook #2, I need drop down lists containing the valid values in cell B2 (Department), C3 (Group), D3 (Category), E3 (Level), F3 (Material) and G3 (User Code). Notice that "Department", "Category" and "User Code" are data elements common between both workbooks but resident in different columns.
View 2 Replies
View Related
Nov 10, 2008
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String)
Dim DVListName As String
DVListName = "DV" & sListName
Application.Goto Reference:=sListName
With Selection.Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
View 4 Replies
View Related
Feb 16, 2014
I am trying to populate some results using countifs formula with multiple criteria. below is the formula am using and the last two criterias are dates
=COUNTIFS('Unproccessed CIT'!$B$5:$B$411,Summary!$A$4:$A$35,'Unproccessed CIT'!$G$11:$G$417,"<>"&"closed",'Unproccessed CIT'!$A$5:$A$38,">="&$C$2,'Unproccessed CIT'!$A$5:$A$38,"<="&Summary!$E$2)
Results:
#VALUE!
View 3 Replies
View Related
Apr 3, 2007
I have 3 dropdown boxes I created using the control toolbox which pull corresponding information from 3 different columns. I would like to be able to format them so that upon data entry in the first dropdown box, the subsequent two boxes auto populate with the corresponding data. Currently I have to select the information for each dropdown box manually.
View 6 Replies
View Related
Oct 11, 2011
I'm attempting something new, a dropdown menu using vlookup to find data . If i use the simple example below, using data from B-D on 1 worksheet, where i want to find people by county:
A B C D
Search by County Name County Town
John Sussex Brighton
Eric Yorkshire York
Jim Cheshire Manchester
Liz Sussex Hove
Sarah Avon Bristol
I've created a dropdown menu on a second worksheet,A2, by county search, to return a persons name,county and town. The problem is if i select Sussex i will get 2 names who live in different towns within Sussex. I've created a simple vlookup which works fine, but because of Sussex having 2 results, i created a second vlookup for the second result to appear in the cell underneath.
The problem is that for the results that only have 1 result, the second vlookup returns a the same result as the first result, which i dont want.
Is there a way where multiple results will be shown if they exist, but for one result to appear if only one result exists?
View 9 Replies
View Related
May 29, 2014
Im trying to create a spreadsheet which has a drop down list in a cell, then when a selection is made a predetermined dollar figure will be entered in the cell next to it.
For Example:
Cell A1 Drop down list I have 20 cities listed, If I select St. Louis, I want the cell next to it to populate with $250.
Every city has a different dollar amount tied to it. So any time I select a city I want the specified dollar amount to populate the cell next to it.
View 4 Replies
View Related
Nov 6, 2009
This is a floowup to the issue that was originally posted as "Returning MAX/MIN values from multiple rows in a named range ". I marked that post as solved since I have worked through part of the issue and since have a different one.
View 2 Replies
View Related
Nov 28, 2013
I wanted to create a multiple drop down lists (using data validation) in column B (50 in all, every 3rd line) whereby, multiple, comma deliminated, results would display in each of the cells - for use elsewhere in the spreadsheet.
I found some code (as follows) which worked perfectly for me
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
Dim oldVal As String
[Code].....
As I mentioned above, I don't really understand the code and all I know is that the line about halfway down "If Target.Column = 2 Then" is defining which column (B) this will work in.
The problem I am having is that I need to protect the worksheet and the moment I "protect" the worksheet, the functionality of displaying multiple values goes away and the drop-down list reverts to only displaying one of the available values.
View 9 Replies
View Related
May 25, 2012
Using Excel 2007
I have six colums (Date; Skill; ST Hrs; OT hrs: Area; Type). I copied and pasted below a small portion of info from the spreadsheet. I know when I copy and paste into a post the information under the headers don't line up exactly...it appears offset, so basically "Date" is of course the date you see..."Skill"'s columns has the first item as nb-mech b..."ST Hrs" first item will be 0.00..."OT Hrs" will be 1.50...."Area"'s first item is "Log FM NO"....and "Type"'s first item is MX07
And there are 17,000 rows of this info and forever growing...a lot of repeated items in each column such as you can see "blaster" has multiple entries on 4/1/2012.
What I am attempting to do which I have not firgured out yet (i have tried array formulas but they bog down the pc forver and couldn't figure out exactly how to make it give me the results I needed...and I also tried sumproducts but that didnt get me what I wanted....and it is being requested of me to NOT make a pivot table but a chart.
What I am trying to create is is the following:
1 - cells to plug in a date range for example cell A1 I plug 4/1/2012 and cell A2 plug 4/30/2012
2 - drop down boxes for columns Skill; Area: Type, which show only unique records in each column
Once I have that, I could then filter all 3 itmes and have only items show in the date ranges I picked and present ONLY the SUMS of columns ST Hrs and OT hrs.
Once the SUMS show up, I can then have cells off to the side that will give a percent break down of what percent of the total hours (for the chose criteria) are ST Hrs and what percent of the total are OT Hrs....and this percentage break down will show up in a Bar Chart, per day chosen in my date ranges....I'm thinking one simple stacked bar per day in the chart.
So say, based on the info below, I wanted to see the total ST Hrs and OT Hrs from 4-1-12 to 4-2-12 for a nb-blaster in LOG FM NO and type MX06.....my result would be 0.00 ST Hrs...23 OT Hrs.....and my bar chart would be one simple bar peaked out at 23 on day 4-1-12.....and within the bar it would be 0.00% ST Hrs and 100% OT Hrs and maybe the total hours for each showing also..don't need that but it may be useful.. ..and no bar for 4-2-12 (because the criteria picked had no hours for 4-2-12)
I have been messign witht is all week and just can't nail it.. I do remember a while ago I would have been able to load the spreadsheet into the post and people could see it in excel...is that option to do that no longer on this site?
DateSkillST HrsOT HrsAreaType
4/1/2012nb - mech b0.00 1.50 Log FM NOMX07
4/1/2012nb - scaffolding0.00 8.50 Bogs NOMX02
4/1/2012nb - coatings mech b0.00 3.00 Log FM NOMX07
[Code].....
View 5 Replies
View Related
May 26, 2013
I would like to be able to choose a Size from a drop down list.
After choosing the size, the Parts and Price records (rows of data) will populate below a few cells.
I will manually insert the Quantity amount of items I need,
This will calculate the total from the cells (price & Qty).
View 7 Replies
View Related
Feb 15, 2014
I want to populate the value of a specific cell based on the choices made from two other dependent validation lists.
I am attaching a workbook that explains what I need to do.
View 9 Replies
View Related
Mar 28, 2012
I am currently working on spreadsheet which is using a mix of Conditional Formatting, Validation and a bit of VBA code.
The spreadsheet is a log of vacancies and applicants, When "vacancy" is selected in A I have introduced some VBA code to lock down cells S:AT on the same row.
The code is working but the issue is it is stopping you using the drop down validation throughout the sheet, if you click the arrow that appears on the cell nothing happens, However you can still access the dropdown by right clicking and choosing the 'Pick from Drop-Down List' Menu Item.
The validation is set up by ranges from another Worksheet.
The Code I am using is:
Private Sub Worksheet_SelectionChange1(ByVal Target As Range)
Dim myrow
Dim StarLock, EnLock
[Code].....
View 2 Replies
View Related
Dec 16, 2013
Every time a name is selected in column C12:C15, I need that respective row to populate with $10 in column J. When column C12:C15 is blank, I need that respective row to read $0 in cloumn J. It's either one (10) or the other (0).
There are rows above and below it as well that have nothing to do with this, so the formula/function would be specific to just this subset of rows (rows 12-15).
I get close, but can't seem to nail this simple formula/function down. I am unable to download any sheets due to my work's firewall.
View 6 Replies
View Related
Jan 25, 2008
I found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies
View Related
Feb 9, 2012
If I make a selection using a drop down, can I have it auto populate another cell with information associated only to the made selection? For instance, if I select January from drop down in A1, I want it to auto populate B1 with 100.
View 2 Replies
View Related
Mar 7, 2013
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
View 6 Replies
View Related
Mar 11, 2013
I am trying to pull data from more than one drop down but don't the same data to show if already use, example as follow:
First drop down Contains:- Pants
Shirts
Hats
Shoes
Dresses
if I chose Hats it should not show up in the second drop down
second drop down Contains:- Pants
Shirts
Shoes
Dresses
Is this done in data validation or combo Box? if so how?
View 2 Replies
View Related
Jun 26, 2014
I am looking for the best way ( or choice of ways) to display the correlation between 2 lists of results.
I have a column of failure percentage rates for engineers that I want to compare against a second column of their compliance rate with a process. There are two levels also. The first set shows the good performers and their compliance, the second showing the poor performers.
My goal is to see whether their compliance with the process has any bearing on their failure rates. The full lists contain data on approximately 400 engineers in each category
(if the the numbers below are not in a proper format, I tried to download the excel converter thingy but the link failed)
faliure rate
Compliance
3.95%
91.40%
[Code]....
View 1 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Jun 3, 2014
I'm trying to figure out how to make a spreadsheet where in one column a type of asset is entered through a drop down menu and then the next few columns are attributes - model, pattern, manufacturer, etc. - that would all have values entered through drop down menus populated based on the choice of 'type of asset' in the first column.
I can get a drop down menu for the 'type' column and a dependent drop down in the second column based on choice of 'type' using =INDIRECT(), but I do that by naming the dependent lists of models for each type after the types listed in the list of types. Once I've done that I can't name the lists of patterns after the types because those names are in use by the model lists. So how would I make multiple lists of attributes associate with the same list of types?
View 7 Replies
View Related
Feb 27, 2009
I have a work book that contains various sheets with different information.
I have two different categories in one of the sheets,1 which contains counties and the other containing districts.
I have done a validation for the county which allows me to pick a county from a drop down list which works fine.I would like to create a drop down list for the districts aswell such that when i select i.e southyorkshire from the counties dropdown list,the districts drop down list will bring only districts in southyorkshire,excluding all the other districsts.hopefully i'll like the same to apply to all other counties.
View 7 Replies
View Related
Dec 10, 2008
I have a workbook with several drop-down lists. The names for the lists are on a seperate sheet in the same workbook. I have used data-validation and allow list in all the cells with drop-downs. I have used =NAME in the source. I opened the workbook this afternoon for the first time in a couple of days and I am no longer able to select from a dropdown. I can type in the cells, but if I type something not included in the list, I get the "The value you have entered is not valid" error. So I feel like the validation is working on the cells, I'm just not able to select from a drop-down list. "In-Cell dropdown" is selected.
View 9 Replies
View Related
Dec 28, 2006
I have been able to use the previous information to create dependent drop down lists but I have been unable to apply the settings to entire columns versus just one cell.
Is there a way to get the dependent lists to correspond to the cell beside it without having to manually type in each cell name?
View 9 Replies
View Related
Dec 4, 2008
I want to know how to link te two lists in my register so that when i select a particular route in one column the corresponding column automatically selects the transit time from the reference list.
View 2 Replies
View Related
