I am trying to track installation of equipment in excel, I know what I want done, but not how to do it. I have 8 columns, and I want a yes in each column to equal 12.5% and a column to show progress at the end, I also want to show total progress for installation of all equipment at the bottom of the page
View 4 RepliesSuppose I made some functions as one Add-in, then How can I make install them, when that file opens?
View 9 Replies View RelatedI've got a spreadsheet that lists multiple pieces of equipment and when it was worked on or down. It has the following columns:
Date
Jeep #
Start Time
Stop Time
Total Repair Time
Other Downtime (which is most often blank, as below)
7/18/06.......35.....1:00 PM.....2:00 PM.......1:00
7/20/06.......33.....1:00 PM.....2:00 PM.......1:00
7/28/06.......35.....9:00 AM....11:00 AM......2:00
10/18/06.....50.....6:30 AM.....7:00 AM.......0:30
10/18/06.....33.....9:00 AM.....11:00 AM.....2:00
(I hope the ... is okay, couldn't figure out how to make the columns line up.)
I can use Sheet Two for the next part, but I don't know how to to get a total time per month for each seperate jeep. Most of the time, there will only be one record per month per jeep, like the second line above. But lines one and three are for the same jeep, and so I need the formula to add column E up only for those two lines.
I have a list of equipment and want to select from three criteria to obtain the result; indoor1, Type and Power (all drop down) I have used index and match to get results in various cells but can't get a correct result for Outdoor and Indoor2, Indoor3, and Indoor4 (all coloured red).
Spreadsheet attached.
I have a contract start date. The payment is due every seven days. I have entered the start date. i need the "next due date" to automatically calculate in the "due date column". here is my problem if a customer has a due date say on 2/15/2014 his next due date should be 2/22/2014. regardless if he pays on the 14th or 21st. i need this date to change each time a payment is made.
View 7 Replies View RelatedI have difficulty to generate sheets on the Status of Equipment from the master sheet. I need to manage the maintenance and diagnostics of a plant, and I have a whole list of equipment, thus when any of those goes faulty, I want to enter the word "Fault" in Column G, Then It must automatically generate the Template for that tag, and name the sheet same as the Tag.
I have added an Attachment : Template for MnD_ExpertQ.xlsx‎
I have a table with average temperatures(120,125,130...220) on the vertical axis and equipment sizes across the horizontal access (size 1,2,3...11). At the intersections is the amount of heat given off the equipment. This table is used as a reference for another sheet in the same workbook.
Basically what the sheet is for is to look up the average temperature of a piece of equipment (given the size and exact heat given off). In order to do this, I need to interpolate using the 2 closest energy values and their associated temperatures. There's a better explanation in the file and it makes for sense when you're looking at it. Attached is the table.
I have been using Excel to create equipment lists for my work. The forum has helped me by creating a visual basic macro to create a 'final list' sheet compiled from the other source worksheets.
On my 'final list' sheet I need the first 10 rows to be left out of the macro’s so that I can add header information like job reference etc. I have tried altering the visual basic code by adjusting the row numbers in it so that it starts at row 10 but this keep's on producing error codes. This is due to my limited knowledege of what each line does.
I also wish to be able to paste new equipment into the final list sheet. When I do this at the moment the code does not recognise it is there and does not carry the information accross back into the source sheet. It is the same when I block select an area and delete the code does not recognise I have done this which is fustrating.
I work for a equipment hire company, where various computers and structure are hired out on different jobs. We are getting to a point where keeping track of stock is a problem, we need to quickly be able to check if an item is already booked on an upcoming job, and keep track of home many are in stock. ETC.
View 1 Replies View RelatedMacro to find data from a huge database of items of equipment and find certain ones relevant to an area. I am using Excel 2003.
I have a spreadsheet which has three tabs.
Tab one has a list of equipment with a Ref (Col A), ID (Col B), mile (Col C) and chain (Col D) start and a mile (Col E) and chain (Col F) finish.
There are about 25 different Refs and IDs, but all rows have different Mile and Chains.
The second tab is an identical template of the third tab which is where I want the results to go (see below)
The third tab is raw data which list thousands of items but I want the macro to find the items which are in the first tab using the ref, ID, mile and chain information.
I have a table with list of equipments and asset number assigned as primary key, I wanted to have a history movement of these equipments but my idea is somehow not logical and very primitive to update every time 2 excel sheets:
ie:
asset no
description
received by
day
[Code].....
We have an equipment sheet that our sales team fills out when quoting customers. The sheet has everything from the items Brand, Model Number, Description of item, cost, MSRP, ect... on it followed with a QTY that is needed. Now one of my jobs is to go through the sheet and create a summary page of everything that is selected and place certain data onto this "Summary Page". This is what I am trying to do:
When a QTY of greater than 1 is selected on the "Equipment" page it will autopopulate the "Summary" page with certain data, mainly the description of the item followed by the QTY ordered. Let me see if I can do an example below
Say I have this equipment list below:
'EQUIPMENT' Sheet
Example.png
Now since a QTY greater than 1 has been placed into column E2:E5 I would like to populate data from the corresponding B, C & D column into the 'Summary' sheet
'Summary' Sheet
1 HD51 I/O, Rugged Dome, HiRes, VF Lens
3 HD73 IR, I/O, Rugged Dome, HiRes, VF Lens
I hope this makes since. If I am able to do this it would save me countless hours of CTRL+V CTRL+C work, that and its hard to catch every value when you have over 3,000 items on a equipment sheet.
So I got this code from http://www.ozgrid.com/VBA/track-changes.htm i followed the directions and pasted it in the workbook module but does not seem to be working. I am thinkning the copy and paste feature is messing something up anyone know what?
I have added a worksheet named Log
I have a list of items that I keep track of when they were last used.
For example:
Item# Last Used
Item#1 8/27/06
Item#2 5/2/07
Item#3 6/30/07
What I would like to do is when I enter a date, it automatically tracks the changes so that I can not only see the most current date but all previous dates if I need to.
The ideal would be to transfer it to another worksheet so that is looks like the original except that is shows multiple dates after it instead of just the most recent.
For example:
Item#1 5/3/05 7/23/06 8/27/06
We have an excel file that I've developed that people in our department are supposed to be using - not that they want to - but it is an edict from our bosses. Is there a way to track who is actually using that file so I can verify that they are using it rather than just relying on them saying that they are?
View 9 Replies View RelatedI have a work sheet that has 113 tabs and I use two macros (both written with help from this forum - thanks), one to protect all of the worksheets and the other one breaks the workbook into 113 separate files. I want to use the tracking feature because I will be sending out these budget templates and want to identify the changes when I receive them back.
Problem is once I enable the tracking I can no longer run my macro’s; I get a VB dialog box with a red X and the number 400. Anyone know how to work around this problem?
I have found another user's code that will track changes for a single sheet, if that code is in the sheet. This code uses the Worksheet_Change function. However, I have just stumbled acroos the Workbook_Change function. The workbook function is exactly what I need, since I have multiple tabs that need to be tracked. However, the code does not seem to work. I can switch between the two functions, using the same code afterwards, but with the new workbooks phrase it does not work. I tried placing the Workbooks_Change in the "ThisWorkbook" object in VBA, but it does not seem to work there or anywhere else.
I have attached the file. The code is in the "thisworkbook" function.
For quick reference:
Private Sub Workbook_Change(ByVal Target As Range)
Dim r As Long, OutSht As Worksheet
Set OutSht = Sheets("Log")
r = OutSht.Cells(Rows.Count, 1).End(xlUp).Row + 1
OutSht.Cells(r, 1) = Target.Address
OutSht.Cells(r, 2) = Now
OutSht.Cells(r, 3) = Environ("UserName")
OutSht.Cells(r, 4) = Target.Value
OutSht.Columns("A:D").Columns.AutoFit
End Sub
I am currently trying to find a better way to track quantities of delivered material from multiple suppliers. I have a attached a sample of what I am trying to do. In the "totals" sheet Row 3 is working as planned. There are a couple of issues that I am having with my formatting as is. First off in my "raw" data sheet there is an empty row between each row of numbers (this is they way I am sent the information from the supplier). This empty row causes my totals to place a Q everywhere column A on "Raw" is not filled with "B". Is there a way to have the totals sheet only pull from the cells with values in them?
My other question is how I would be able to get the values for material, Net wt., and Charges to populate if Column A in "Raw" is Q?
Quantity Tracking.xlsx
I was wondering if there is a function to be able to track when the last time a hyperlink was clicked and display the date in a new cell?
View 1 Replies View Relatedi am a builder and i want to make a spread sheet to keep track of what i have been paid and the labour costs i have paid out
so i am working on 20 houses that all have 7 stages of payment each, and 5 to 8 men working on them who receive a price for each stage, but are paid a portion of that price each week while they are working on that stage
what i am trying to do is set up a sheet to keep track of what has been paid and the balance remaining for each stage and what has been received
i have tried doing it a few different ways but im none to clever with spread sheets and what is causing me the problem is next to each payment made i need to put the date and the name of the person who was paid so it always seems to just look a cluttered mess
have any of you got any ideas of how i could simplify this and make it look neat and easy
or alternatively is there some other software that may suit this application better?
So if we take first line the defect id is 10. The date entered is 21-08-2007 and the status is 1-NY ( means new)
NExt line the defect ID is still 10 the date is changed to 22-08-2007 and the previous status is was 1-Ny and the new status is 03- under vurdering (to be
evalueted)
Third line the defect ID is still 10. The date is changed to 04-01-2008. The previous status was 03- Under vurdering ( to be evalueted). The new status is 10-lukket.
I want to be able to track the time from 1-NY to 10-Lukket.
Now the even more tricky part. As you can see other defects go over different statuses e.g defect number 1000 here.
The sheet I have is 13000 rows and I have a total of 2300 defects
1021-08-2007 10:491-Ny
1022-08-2007 15:381-Ny03- Under vurdering
1004-01-2008 13:4703- Under vurdering10-Lukket
10029-08-2007 10:051-Ny
10003-09-2007 14:121-Ny04- Afventer tilretning
10012-09-2007 15:2204- Afventer tilretning10-Lukket
100006-02-2008 11:2901-Ny
100012-02-2008 15:0501-Ny04- Afventer tilretning
100015-08-2008 08:5304- Afventer tilretning10-Lukket
100015-08-2008 22:1310-Lukket04- Afventer tilretning
100004-02-2009 14:0404- Afventer tilretning10-Lukket
i m trying to use Excel program to keep track of the hours he is working. I know there is a way to do it but it has been many years since I used Excel and can not remember how to do it. He would like to insert the time (hours & minutes) he works in column A and have a sum in the next column.
View 7 Replies View RelatedIf I wanted to use excel to track inventory in/out, is there any way I can do the following?
I have a barcode scanner and I wanted to be able to quickly add and subtract quantities.
So, I want to create three fields at the top of list, one with the function to Add 1 to quantity, one to Subtract 1, and one simply to find (well I guess I can use excels find feature, but that would be an extra step)
When I scan a barcode into the "Add 1 to quantity" field (which only appears at the top of the page), excel will automatically add 1 to the corresponding field next to the item that has that UPC number. The same for Subtracting 1.
I tried to use Formulas -> Trace Dependents to find which cells is linked to the current cell.
Excel only shows it is linked to the other tab, but don't tell me which tab exactly. How to find the tab which is linked to current cell?
I'm trying to make a worksheet to track inventory, not for sales but for tracking how many supplies are on hand in storage rooms, closets, etc. The worksheet will be used by as many as 20 different users probably on a network.
Because it will be used by many people, I'm trying to see if there is a way that the worksheet can be updated after every save. In particular, the amount that are "on hand".
For example, say there are 10 of a particular item on hand to start. Joe takes 2 and goes to record it on the worksheet. He inputs the 2 he takes, which now show that there are 8 on hand remaining. He saves the worksheet. Then, Jerry comes and takes 2 and goes to record it on the worksheet.
I can't figure out how, or if it's possible, to have the worksheet show Jerry that there are 8 on hand to start, not 10. So that when he takes his 2, it should show that there are now 6 on hand remaining. I've attached an example worksheet.
How to track the value of last item in CountIf and work backwards? I am trying to do inventory valuation at the end of the month. For example I have 7 purchases in a month for 1000 units in each purchase order, my on hand inventory is 1500 units. from the purchase details I did a countif to tell me there are 7 PO's in a month for the item, but if i want to find how much each units costed starting from last PO in the CountIf is there a way to pull that number? I have total purchase amount by PO & quantity by PO also in separate columns, so I know cost per unit in each PO but can't figure out how to go backwards (starting from last in)
View 14 Replies View RelatedI've been looking around for a way for Track Changes to reference the loggedin username of the workstation rather than the name in Excel registration.
I found this
Function UserNameWindows() As String
UserNameWindows = Environ("USERNAME")
End Function
: on this board and another blog.
But I don't know how to enter it to make this work. I had read you make it a new module and assign a formula, but the most I could get through was opening the VBA editor for the workbook, creating a new module, and pasting the code. Changes would still reference the Excel registration name, not the Windows' logged in username.
How can I track date of every last change made in certain cells so my boss can monitor if I am keep working on a project?
View 9 Replies View RelatedI was wondering if VBA or Excel has the capability to add and total Row Height or Pixels? For example I have my Rows set to a height of 14.25 (19 pixels). My Range that I am working with is A2:T41 for a TOTAL ACCUMULATED ROW HEIGHT of 570 (40 Rows X 14.25) and 760 Pixels (40 X 19).
What I would like to accomplish is that once the TOTAL ACCUMULATED ROW HEIGHT of my Range reaches 570 then Row 1 appears. If the TOTAL is less then 570 then Row 1 remains Hidden.
Does anyone know IF and HOW this can be done? I need this due to the fact that the Rows will Autosize and I need to have my header Row appear. I can't just Freeze Row 1 because my actual Headers are on Row 16.
Hope this makes sense and hope that someone has a solution.
Bye 4 Now,
Mar
I have created a spreadsheet for my students on a shared drive. They will be able to go there and make comments..My question is this: I know they can have their name set in Excel...How long will the name stay in it. I have to change the speedsheet daily. Does that mean the students will have to enter their name daily. Also how can I track each student comments on the spreedsheet?
View 9 Replies View Related