know a code that will hyperlink a value on sheet1, column B to the same value in sheet 2, column B? Also, will sheet 1, once assigned a link, be able to do sort and keep the hyperlink?
View 2 RepliesI have a sheet1 with following column name Ab,Bb,Cb,Db,Eb,Fb and sheet two contains Ab,Xc,Eb,Sv,Db,Fb,Gm,Cb,Hb these headings are on 7 line of both excel sheet.
Now I want to check each cell under column name Ab in Sheet1 and compare it with all the cells under column name Ab in Sheet2. If both matches then update Cb,Db,Eb,Fb of Sheet1 to the corresponding columns in sheet2 for that column name.
I need to fill in the third column on sheet 2 from the 3rd column in sheet 1. do I need an IF statement combined with vlookup??
sheet 1
mark l XYZ l 45
katy l ABC l 3
mark l ABC l 6
katy l XYZ l 45
mark l DEFl 4
sheet 2:
mark l XYZ l
katy l ABC l
mark l ABC l
katy l XYZ l
mark l DEF l
I have a worksheet, "District", that has names of team members from A2:A (The number of team members will vary, so I would need the macro to stop when the list ends). I need these to be distributed to column A on another sheet, "Input", from A11 down until it hits a row that has a blank cell in column F. I've tried a couple of things, but just can't seem to get it to work.
View 14 Replies View RelatedI have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies View RelatedI'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View Relatedi'm having in excel- I'm looking to populate rows in 2nd tab based on the data entered in the 1st tab. The rows to be populated in the 2nd tab resides in the 3rd tab. So a match has to be made on the data entered in the 1st tab. When a match is found on the 3rd tab then the corresponding rows from the 3rd tab should be listed on the 2nd tab.
I have an example.xls attached for clarity.
example.xls
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View 2 Replies View RelatedI am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
I want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation.
In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
I've got 3 problems I've been trying to solve for the last 7 hours, I think they are all relatively simple to those who know what they are doing but I've exhausted my excel for dummies and every formula I have taken from this siteand tried to adapt. Obviously I'll post each problem on a different post, so here's problem one. The sample is attached. It will consist of about 35 sheets, each documenting the hire of a Motability scooter or wheelchair.
On each sheet column P will identify any review dates. What I would like is: On the Master page in Column C next to the relevant sheet name is for it to display any 'Review' that is flagged up, so that the user can have an overview. There will only ever be one 'Review' per sheet, I can only get the master page to show it by referencing it to one cell, I can't work out how to search the whole column.
I need to copy columns b,g & h from workbook1 to workbook 2 c ,e, f
workbook1 is the path mentioned in cell A1
Workbook2 is the path mentioned in cell A2
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
i want to Sort by column E Type,which i can do manually easily.but then i want to run a macro that will copy all the rows with values,ie.Express Checkout Payment Received etc to another worksheet and name that worksheet with Express Checkout Payment Received.
View 1 Replies View RelatedI have date on Sheet 1 and Sheet 2
what I want to do is take column A from Sheet 1 and compare to Sheet 2 column A if it's one Sheet 2 then on Sheet 1 column C and D post the results...
ie
Sheet 1
A B C D
ADDYY 64
Sheet 2
ADDYY4644454654
so then Sheet 1 would look like this
A B C D
ADDYY 64 ADDYY4644454654
Can someone help me with this script? What I want to do is paste the next sheets data into the next empty space in (A) of the last sheet. The script works for the first paste but after that it just over pastes the next sheets data on top of what was already pasted.
View 8 Replies View RelatedI have a requirement to copy a few column(like a,d,e,f) from sheet1 and paste it to sheet2 column.
where column a of sheet1 will be copy to column d of sheet2.if anything data is already there then overwrite that column.
I'm trying to make the below two column selections into a selected range to clear out formulas/values in the range.
Current code segments:
ActiveCell.EntireColumn.Select
Columns(ActiveSheet.UsedRange.Columns(ActiveSheet.UsedRange.Columns.Count).Column).EntireColumn.Select
Is there a way to combine the two code segments into one selected range?
I created this hyperlink function. It links to a1 of sheet 1 to a1 of sheet 2. However, when I click on the a1 cell in sheet 1. an error message appears. I have attached the spreadsheet...
View 2 Replies View RelatedI have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
=IF(ROWS($1:1)>MAX(C:C),"",INDEX(A:A,MATCH(ROWS($1:1),C:C,0)))
I can't get it to work correctly across two sheets.
I've attached Sample of spreadsheet for review : HDForm_Test01.xlsx
I have to SET sh1, then activate sh1 before I can SET rng1. Is there a way to just...
Set rng1 = sh1.Range(Columns(1), Columns(11)) ' why doesn't this work?
Sub Raw_Sales()
Dim sh1 As Worksheet
Dim sh2 As Worksheet
Dim rng1 As Range
[Code]...
My workbook contains 2 sheets one called "UK" the other called "Stock"
I need Rows 75 and 76 from "UK" to be transposed into sheet "Stock" in Cols C and G, respectively.
I tried to do this with Paste Special and Transpose, but because these rows have formulas in them when you transpose it it shows #REF! in each cell.
I want to be able to associate the first row and first column of Sheet 2 to Sheet 1. I need to make sure the data in each row stays next to its corresponding cell in the first column, even with changes in the first column. The data that is not the labels in row 1 and column 1 are different between Sheet 2 and Sheet 1, however.
To clarify what I'm looking for, I attached an example excel file where I manually entered stuff for each cell that describes what I want to have automated:
The first row and first column of Sheet 2 are always equal to the first row and first column of Sheet 1. However, the data in between them is different. When I add the 'bb' cell into Sheet 1, the 'bb' cell needs to be automatically updated into Sheet 2 and a new row is inserted in both sheets. It is important that the corresponding data for each of a, b, c, d stays next to a, b, c, d, respectively in both sheets (i.e. I want a blank row next to the 'bb' cell in both sheet 1 and sheet 2).
EDIT: In the file that I have attached, there are four sets of data all on one sheet. In reality the 'Sheet 1' set would start on top left corner of Sheet 1 and the 'Sheet 2' set would start on top left corner sheet 2, I just put them this way so you can see them all at once.
I have two sheets. Sheet1 contains two columns Site_Name and Site Code. And Sheet2 contains Person Name and Site Name. So i need the site code values to be mapped in sheet2 from the sheet1.
Is there any function to do this ? Find the input docs , am attaching here.
Sheet2.xlsx
Sheet1.xlsx