If Statements Covering A Range Of Cells ?
Jul 15, 2009i really want to make it into a range formula but cant work it out.
View 2 Repliesi really want to make it into a range formula but cant work it out.
View 2 RepliesI have a set of data covering cells A8:C71
Column A lists locations - there maybe upto 6 entries with the same location.
Column C lists a unique serial number.
The list is sorted by column A (A-Z).
For this example say location LONDON has 3 entries, with serial numbers 120, 125, 128.
In cell F1, i want to display the lowest serial number for LONDON
In cell F3, i want to display the 2nd lowest serial number for LONDON
In cell F5, i want to display the 3rd lowest serial number for LONDON
I have tried the following formula, with no success..
=LARGE(VLOOKUP(I9,A8:C71,3),1)
I want a message to show up if I have any of 6 selected cells empty? It basically serves as a reminder to fill in all required cells in a sheet that may be located in different cells. How can I write a formula in one cell that will look at all source cells and tel me that some are empty?
NameAgeLocation
Joe******
HeightWeightTime
******3 PM
Formula Here to verify all filled in.
How do you write an If then statement using a range of cells? I want to construct a logic test using the range of cells A7:A19. I want the logic test to see if the any of the values =1. If the test is true then I want it to display the value in B7:19 (which ever cell corrulates to the cell in column A that has the value of 1) and display the number in the B column.
View 6 Replies View RelatedHow do I set up the formula bar so it doesn't cover the column headers?
View 1 Replies View RelatedI use excel every once in a while and have come to a nice little problem here. I am sure this has already been answered but really have no idea how I would go about searching to find it. I attached a portion of my sheet to better understand what I am looking for. As you can see the name of this sheet is 100-150.xls and this is for average tickets. I have some that go up to 500 at 50 dollar intervals. I would like to consolidate these into on sheet and the individual cells amounts will depend on the "Average Ticket"
I do not mind making an IF statement for every cell that I need to but maybe some other ideas for something different that will work are fine as well. Basically the number that goes into cell B18 is dependent on the average ticket and the number of transactions. So depending on the average ticket this determines how many transactions that will be listed in the range of "B" cells down the sheet.
So for cell B18 I would like an IF statement that takes into effect the different average tickets. I think it would look something like this. =IF(B18???? <---- I will leave this like this and work on the rest of the statement when i have an answer to this. The question marks should represent a way for the statement to see that the average ticket is between 100-150 and them multiply the number of transactions by .085 and that is number of transactions that go into B18. The .085 changes with different average tickets but I will deal with this by nesting the IF statement together for each "B" cell.
I'm working with some very simple VBA (just started a month ago). Part of my macro looks like this ....
View 3 Replies View RelatedI have three IF statements as below. the problem is if the first statement is true I want it to skip the next two statements or the result will be changed again.
View 2 Replies View RelatedSheet one will contain the following:
DATE A B C D E
2/22/2008TRUEFALSEFALSEFALSERon
2/23/2008FALSETRUETRUETRUEPhill
2/24/2008FALSETRUEFALSEFALSETracy
2/25/2008FALSEFALSEFALSEFALSESharon
2/26/2008TRUETRUEFALSETRUEBill
On sheet two I need to list any date that has three or more true statements with the coresponding name.
EXAMPLE:
2/23/2008Phill
2/26/2008 Bill
I am working with an excel spreadsheet. There is a column for "name", and then the next column is for medical condition.
If the same patient has multiple (say, 4) conditions, the rows for "name" are combined into a single cell(let's say, a cell going from row 2 to row 5, witha a single name in the combined cell) , with the next column having four different cells adjacent to the single cell (cell 2 has "bleeding", cell 3 has "fever", cell 4 has "diarrhea", and cell 5 has "rash"). Some patients have only single conditions, single cells.
Will this mess up COUNTS and COUNTIF?
Is there a way to split the combined cell2-5 for ''name" into four cells all containing the same name?
I am manually scrolling through Excel right now to find all blank cells in column L. Some cells have dates, others are blank. IF L is BLANK, I go to row K and copy/paste row K to row L. IF K is BLANK, I got to row I and copy/paste to row L.
Is there a statement I can put into row L to basically say "If blank copy/paste from row K. If row L and K are blank go to row I and copy/paste to L." ???
I am trying to check if the dates are equal with multiple if statements! Macro works great if first date is wrong, but if the 2nd or third date is not unequal it does not work anymore.
really tried to do it myself but unfortunately
I added an excelexample
Date in E3 is different (if you type in other date in cell b3 macro does work partially).
I have a workbook with two sheets 'Driver details' and 'Jan Raw Data'.
If column B Employee (Jan raw Data) matches the names in Columns B&C (Cloumn B & C, Sname, Fname) on the 'Driver details'.
If it equals a certain name i.e. Jon smith, then in empty column E of the 'Jan raw data' then copy the entire row of that individual from the 'driver details'.
Driver details
A B C D E F
Emp No Sname Fname Desc Desc Reg
123 smith Jon opticar BVA MA2
456 pratt mike opticar TMA YP7
Jan Raw Data
A B C D
Occup Emp Product Supp no.
Crawley Smith Jon unleaded 3453534
Crawley prat mike unleaded 89797
I am trying to create a macro that will add and delete individual cells depending on an IF statement. The code that I created deletes/adds cells regardless of the IF statement.
If Sheet1.Range("F3").Value = Sheet1.Range("G2").Value Then
Range("G2").Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
End
ElseIf Sheet1.Range("F3").Value = Sheet1.Range("G4").Value Then
Range("G3").Delete Shift:=xlUp
End
End If
Also, what is the easiest way to have this code apply to all rows within column F, while adjusting the corresponding cells referenced in column G? The last row within the spreadsheet changes.
How can I create a multiple if statements that returns a specific response if the cell is blank?
For instance, =if(K6=[date],"Carry Out"), if(K6=[blank],"Break Out"))).
Im trying to pull together a formula to achieve the below. What i have is a spreadsheet to be used by staff in different countries so im looking to make it easy to modify the categories used without the user needing to do anything complex with formulas.
The right hand side of my file (C:E) shows a code for each year we have covered a country with the year as a prefix (2014 - Blah). The left (A:B) is a summary showing the latest year we covered that country.
Current formula:
{=IF(COUNTA(C2:D2)<=0,"","✔-"&MAX(LEFT(C2:D2&"0",4)*1))}
The current formula works fine if you set the columns to where the data actually is but for ease of use i need it to look at the data in rows 1:2 and match up the Continent/Country and then MAX the dates.
What I would like to do is use the IF function to retrieve data from another sheet called Data which has six columns but has various amounts of data that I would also like to pick as a drop-down menu.
The initial cell has a dropdown populated with data using the Data Validation.
Example would be if the following is selected from the initial drop-down menu and then allows me to select data depending on the previous selection.
PX1 - fetch information from Data T2 to T25 and then select that data which then would allow me to select data again from say column U2 to U9.
Is this possible?
How can I combine the two below statements like these to make one "Or Statement"? Sorry...I haven't done excel and/or's in forever?
=IF(('Proj Info'!L10="main")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
OR
=IF(('Proj Info'!L10="serv")*AND('Proj Info'!L9="CT"),"BMSVC",'Proj Info'!L9)
VBA in Excel 2007. Essentially, what I am trying to do is this:
I have to two columns (A and B) that have a drop down list in each cell containing text options. I created the drop down lists using simple data validation. Let's say that A has the following options (East, West, North, South) and B has (Up, Down, Left, Right). For each combination of these, e.g., A1 = East and B1 = Down, I want C1 to pull a unique piece of data (a $ amount) from a separate worksheet. I can get this to work in its most basic form but I want to be able to be able to do this for cells in rows 1 - 300 without having to write separate lines of code for each.
Additionally, I am having trouble getting C1 to update automatically once A1 or B1 are changed.
I use macros to print pages, depending on the number of entries I have. If I have 1500 entries, I have to have 1500 If statements. Is there a way to write VBA in a macro to where I can refer to a cell and use the value of that cell to print the range.
View 5 Replies View RelatedI have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Is there a way I can stop a range of cells from recalculating once the cells in that range have a certain value?
I'm a complete newbie when it comes to any kind of programming and so...I'd need a little bit of handholding with this.
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View RelatedI'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.
View 9 Replies View RelatedI would like to use a excel formula to resolve this problem.
Column C is the anwser I pretend.
In the same cell it will return the name of the correct range.
Ex: Between 200 and 300 there are numbers involved that are included in Range 1 and Range 2 (see second table)
Cell
A
B
C
1
From
To
Result: (How to return this value?)
2
200
300
Range1, Range2
3
301
400
N/A
4
401
500
N/A
Table to Check Value to Return:
Cell
A
B
C
1
120
280
Range 1
2
281
300
Range 2
3
600
650
Range 3
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.